NBS Source
List your products
Description

5600 Electric Curtain Track System is a wall or ceiling mounted, single channel track for light to medium weight curtains, up to 65 kg in weight, designed for domestic and contract applications. The track can also be recessed into the ceiling using custom recess profiles and wedges.

Standard Components:

  • Track Ref 10580.
  • Motor 100–250V AC: Ref 9060.
  • Control systems 9940 or 0450.
  • Belt Ref 10825, Belt return set Ref 10819, Cover ref 10581; Mask pair stack Ref 10836; Master carrier set Ref 10822; Belt return set Ref 10819; Case holder Ref 10817; Pilot runner set Ref 10828; Pilot runner arm Ref 10837; Roller glider Ref 10840; Overlap arm straight Ref 10820; Overlap arm bent Ref 10821; Overlap arm support set Ref 10826.

Features:

  • Standard profiles can be bent to 250 mm radius (minimum); recessed fixing profiles can be bent to a 500 mm radius (minimum).
  • Stacking: Multiple and asymmetric applications.
  • Supplied complete with motor connected.
  • Curtain travel speed: 210 mm/second.
  • Compatible with Wave, a contemporary curtain heading system which allows curtains to hang in a continuous wave which is smooth, simple and elegant.

Switch control:

All electric controlled systems can be controlled by a white plastic wall mounted switch. When using fixed switches only, where more than the switch is needed to operate systems individually, the low voltage control facility on the motor itself should be used to provide easier, safer and more economic installations.

Fitting:

Where the system is to be fitted to the ceiling (recommended in most cases), the surface must be absolutely flat. Any unevenness will cause problems in fitting the clamps and will almost certainly affect the functioning of the system.

General information
Features

Elegant and premium appearance, compatible with Wave curtain heading systems, smooth and silent operation due to new patented roller and wax coated profile, two motor speeds, manual override and 'Touch and Go' allows manual start.

Material

Aluminium

Shape

Rectangular

Size

32.1 x 22.7 mm

Uniclass 2015 Window curtain supports (Pr_40_30_20_96)
Specification data
Product Reference

5600 Electric Curtain Track System

Dimensions

As drawing ___

As schedule ___

Colour/ Finish

Bronze powder coated

Silver powder coated

White powder coated

Fixing brackets

Wall fixing extension brackets, Ref 11200

70 mm projection to outer face of track.

Wall fixing extension brackets, Ref 11201

90 mm projection to outer face of track.

Wall fixing extension brackets, Ref 11202

110 mm projection to outer face of track.

Wall fixing extension brackets, Ref 11203

130 mm projection to outer face of track.

Wall fixing extension brackets, Ref 11204

160 mm projection to outer face of track.

Wall fixing extension brackets, Ref 11205

210 mm projection to outer face of track.

Wall fixing extension brackets, Ref 11210

70 mm projection to outer face of track.

Wall fixing extension brackets, Ref 11211

90 mm projection to outer face of track.

Wall fixing extension brackets, Ref 11212

110 mm projection to outer face of track.

Wall fixing extension brackets, Ref 11213

130 mm projection to outer face of track.

Wall fixing extension brackets, Ref 11214

160 mm projection to outer face of track.

Wall fixing extension brackets, Ref 11215

210 mm projection to outer face of track.

Wall fixing universal extension brackets, Ref 11154

120-148 mm projection to outer face of track.

Wall fixing universal extension brackets, Ref 11155

150-178 mm projection to outer face of track.

Wall fixing universal extension brackets, Ref 11156

200-228 mm projection to outer face of track.

Adjustable wall fixing extension bracket colour

Silver

11200-11205 and 11205-11215 only.

White

Motor

Ref 9060

Operating system

As standard

Infra-red control

Wall switch control

Accessories

Not required

Standard product features

Track:

  • Profile: 32.1 mm (wide) x 22.7 mm (deep).
  • Maximum overall track length: 15 m.
  • Patented roller glider.
  • Patented wax coating.
  • Brushless motor.
  • ‘Touch and Go’ manual start.
  • Manual override in case of power failure.
  • Two motor speeds (21 cm per second or 15 cm per second).
  • Bendable recess profile.
  • Motor can be mounted in many different directions and positions.
  • Move App for operation via tablet or phone.

Material:

Aluminium.

Fixing:

  • Track fixings are required at 300–600 mm centres, depending on the curtain configuration.
  • Fix nylon ceiling clamps Ref 3004 to ceiling.
  • Fix direct through the profile with mounting support plate 10865 and profile protect 7002.
  • Fix to wall with brackets 3134-9 and bracket 3041.
  • Fix in recess with recess profile 10862.

Product Options

Motor/ Features:

Ref 9060:

  • Suitable for all common home automation and bus systems.
  • Switching by the mains group – no relays required.
  • Switching by low voltage inputs group (maximum 12 motors) and individual.
  • Mains 230V simultaneous or individual operation.
  • Two programmable scenes (intermediate stops).
  • Standard status LED indicator.
  • Can be stopped at any position.
  • Silent Gliss radio control systems Ref 9960 OR Ref 0450.

Positioning:

  • Motor can be mounted in 4 positions either above or below the track.
  • Motor can be hidden by curtain or can be positioned above track profile in suspended ceilings; consult manufacturer for details.

Fixing brackets:

  • Ceiling fix with clamp Ref 3004 – with end fixings 100 mm from end of track; higher edge of profile to room side.
  • Ceiling fix direct through profile with mounting support plate 10865/profile protector 7002 with end fixings 100 mm from end of track; higher edge of profile to room side.
  • Recessed fix with recess profile Ref 10862 and fixing wedges Ref 5118 – at 800 mm centres; end wedges to be positioned 200 mm from ends of track.

Accessories:

For switches and controls see Silent Gliss Systems 9940 and 0450.

Standard accessories:

  • Clamp Ref 3004.
  • Drive belt Ref 10825.
  • Lead with in-line connector Ref 0766.
  • Mask for pair stack Ref 10836.
  • Master carrier Ref 10822.
  • Overlap arm (straight) Ref 10820.
  • Overlap arm left (bent) Ref 10821.
  • Roller glider with eye Ref 10840.
  • Motor cover 10816.
  • Pilot runner set 10836.
  • Pilot runner arm 10837.

Other accessories:

  • Bracket (for use with bracket 3134-9) Ref 3041.
  • Bracket 3134.
  • Bracket 3135.
  • Bracket 3136.
  • Bracket 3137.
  • Bracket 3138.
  • Bracket 3139.
  • Bracket cover (60 mm) Ref 3133.
  • Bracket cover Ref 3133L – for extension brackets 3138 and 3139.
  • Connecting bridge Ref 10831.
  • Radio module set Ref 9063.
  • Move (App) server Set (includes 1 x stick) Ref 9960.
  • Move (App) transmitter Stick Ref 9961.
  • Recess profile Ref 10862.
  • Recess mask, motor Ref 10863.
  • Recess mask, belt return Ref 10864.
  • Mounting support plate Ref 10865.
  • Overlap arm long, straight Ref 10957.
  • Wave Top hemming tape Ref 6363.
  • Wave Master Carrier, single stack 80 mm Ref 10845.
  • Wave roller glider cord 80 mm Ref 10852.
  • Wave overlap arm support Ref 10854.
  • Wave end stop, belt return Ref 10856.
  • Wave Panhead screw Ref 10867.
  • Wave roller glider cord 60 mm 10869.
  • Wave overlap arm, pilot runner Ref 10886.
  • Wave glider cord 80 mm Ref 10905.
  • Wave glider cord 60 mm Ref 10906.
  • Wave glider support Ref 10924.
  • Curtain lead weight Ref 10075.
  • Curtain fabric weight Ref 10076.
  • Wave heading tape Ref 6349.
  • Smart RS485 module Ref 11270.
  • Smart Gateway Controller Cedia version Ref 11260.
  • Smart Gateway Controller KNX version Ref 11261.
  • Smart Expansion Unit Ref 11262.

Digital objects
PlatformCompatibleVersionCertified to
Revit
Revit 2016 3 2.0
IFC
- 3 2.0
Download now from NBS National BIM Library