This product is no longer available —
BSI Kitemark
Certificate type
QA Certificate
Certificate type
BBA Agrément Certificate
Certificate type
Roof insulation system with integrated fixing points (no thermal bridging) for a standing seam or profiled metal sheet cladding (on metal deck, maximum profile Corus type D100).
Properties:
Advantages:
Uniclass 2015 | |
CAWS | J41/10 Built-up reinforced bitumen membrane warm deck roof covering J41/110 Built-up reinforced bitumen membrane warm deck roof covering |
Product Reference | 4.6.3 Roof - Insulation with thermally isolated Fixing Positions for Standing Seam Roof |
Adhesive | PC® 11 |
Fixing plates | PC® SP150/ 150P |
Insulation | - |
Type | Foamglas® Ready Board (T4+) |
Thickness | 70 mm80 mm90 mm100 mm110 mm120 mm130 mm140 mm150 mm160 mm170 mm180 mm |
Bituminous waterproofing membrane | As section J41, clauses 400 or 405 |
Separating layer | As section J21, clause 400 |
SurfaceLayer | Profiled metal sheet, as section H31Standing seam metal sheet, as sections H71–75 |
Standard product features | Characteristics:
- Foamglas® Ready Board (T4+):
The product is also available as Readyboard (2)(T4+) designed specifically as a base layer to complement standard Ready Board (T4+). |
Product Options | Insulation: - Thickness: For flat insulation thicknesses of ˃180 mm, use double layers of minimum 90 mm per layer.
|
Insulating Standing Seam Roofs - Case Study
Roof for Health Spa - Case Study
Roof with Aluminium Panels for High Rise Building - Case Study
Insulating Standing Seam Pitched Roof - Case Study
Insulating Standing Seam Roofs - Case Study
FOAMGLAS Insulation for Kal Zip Roofs
4.6.3 Roof - Foamglas Insulation with Thermally Isolated Fixing Positions for Standing Seam Roof
TG1 Technical Guide - Preparation of substrates
1.1.2 - Ready Board T4+ Floor Insulation (load bearing) with Waterproofing Membrane beneath Structural Slab
1.2.1 - Wall External - Insulation To Below Ground Concrete
1.2.3 - Wall External - Insulation with Waterproofing Membrane to Below Ground Concrete
2.1.1 - Facade - Foamglas Insulation with Fixing Positions for Metal Lattice or Fabric Cladding
2.1.2 - Facade - Foamglas Insulation with Fixing Positions for Planting (Wire Trellis)
2.1.3 - Facade - Foamglas Insulation with Fixing Positions for Timber Cladding
2.1.4 - Facade - Foamglas Insulation with Fixing Positions for Panels
2.1.5 - Facade - Foamglas Insulation with Fixing Positions for Large Format Stone Cladding
2.2.1 - Facade - Foamglas Insulation With Thick Coat Render
2.2.4 - Facade - FOAMGLAS Insulation With Plaster Finish