NBS Source
List your products
Description

175 x 125 mm extruded aluminium moulded ogee type 46 gutter.

Jointing:

Butyl mastic tape with low modulus silicone sealant at rivet fix through positions is recommended.

Fixing:

Stainless steel fasteners are recommended.

General information
Specification data
Product Reference

MOG4 175 x 125 mm moulded gutter

System colour/ finish

Mill finish

Powder coat, colour ___, texture ___

As drawing ___

Gutter

1500 mm, code MOG4/2

3000 mm, code MOG4/1

As drawing ___

Contractor's choice

Fittings -
Running outlets

None

MOG4/13 running outlet 63 mm round

Alternative sleeve outlet available as option.

MOG4/14 running outlet 75 mm round

Alternative sleeve outlet available as option.

MOG4/15 running outlet 100 mm round

Alternative sleeve outlet available as option.

MOG4/16 running outlet 125 mm round

MOG4/17 running outlet 150 mm round

MOG4/18 running outlet 75 x 50 mm rectangular

Alternative sleeve outlet available as option.

MOG4/19 running outlet 75 mm square

Alternative sleeve outlet available as option.

MOG4/20 running outlet 100 x 75 mm rectangular

Alternative sleeve outlet available as option.

MOG4/21 running outlet 100 mm square

Alternative sleeve outlet available as option.

MOG4/22 running outlet 150 x 100 mm rectangular

MOG4/23 running outlet 150 mm square

As drawing ___

Contractor's choice

Angles

None

MOG4/3 90° external angle

MOG4/4 90° internal angle

MOG4/5 135° external angle

MOG4/6 135° internal angle

MOG4/7 ___° irregular external angle

Bespoke angles available.

MOG4/8 ___° irregular internal angle

Bespoke angles available.

As drawing ___

Contractor's choice

Stop ends

MOG4/10 right hand stop end

MOG4/11 left hand stop end

As drawing ___

Contractor's choice

Brackets/ Rafter arms

None

Manufacturer recommends direct fixing of this gutter size.

MOG4/29 side rafter bracket

MOG4/30 top rafter bracket

Manufacturer advises against use of this bracket type.

MOG4/31 mortar bracket

As drawing ___

Contractor's choice

Standard product features

Dimensions:

  • Size (top x front elevation): 175 x 125 mm. Base 115 mm, back face 135 mm.
  • Thickness: 2 mm.

Product Options

Sleeve outlets:

Sleeve outlets are available as an alternative to running outlets. A sleeve outlet consists of a square plate with attached spigot that may be set into the gutter base at any point, giving increased flexibility and cost efficiency. Consult manufacturer for details.

Finish/ Colour:

Gutters can be provided in natural mill finish or factory applied polyester powder coatings to BS 6496 and BS 6497. An extensive range of standard colours is available to RAL or BS colours. Other colours may be at an additional cost.