Multifunction pump control and monitoring panel.
The Newton Control Panel-Pro will operate a maximum of two 750W/230V AC pumps.
The panel is designed to be used with an optional Newton Victron Battery Backup System, sized to suit the pumps and installed with sufficient battery power to ensure continued pumping during power outages.
A pump control panel which has been designed to provide pump operation and diagnostics. The panel features interfaces for use with Newton battery backup and telemetry systems as well as connections to whole house alarm and monitoring systems.
The Control Panel PCB is split with two separate circuits, ensuring that pumping will continue even if one of the control circuits should fail. This effectively means that the Newton Control Panel-Pro is two control panels within one case, offering unrivalled redundancy.
Self-diagnostic programs test the pumps on a weekly basis to ensure correct pump performance, with the appointed service engineer automatically informed of any detected problem with either of the pumps if the Newton Dialer telemetry system is installed.
Features and benefits:
For further information, please consult manufacturer.
290 x 240 x 94 mm
290 x 240 x 94 mm (or 17 mm if recessed into wall) (w x h x depth)
The panel is supplied with a one-year back to base warranty which is dated from either the date of purchase or a proven date of installation. If the unit develops a fault during the warranty period, Newton Waterproofing Systems Ltd will repair or replace the unit under warranty. Contact the Newton sales office for a returns form which explains the returns procedure. The warranty will be invalidated if the unit is damaged because of improper handling, storage or installation, and in such cases a repair charge may be applicable
R12/135 Private packaged pumping stations and pressure pipeline system
R18/310 Private packaged pumping stations
Pump control panel split with two separate circuits, ensuring that pumping will continue even if one of the control circuits should fail.
Pump control panel - Newton Control Panel-Pro is two control panels within one case.
The panel is supplied with a vertical water level float switch and high water alarm float switch.
Newton Control Panel Pro (CP2)
Newton Control Panel Pro and pre-fitted Newton Dialer (CP7)
(+ Battery Backup Option).
Sounder volume (dB)
Vertical (Pumps) and Reed (Alarm).
MultiPlus 12/800/35 (BB1).
Battery backup facility for pumps of 150 W and 250 W.
MultiPlus 12/1200/50 (BB2).
Battery backup facility for pumps of 400 W.
MultiPlus 12/3000.120 (BB3).
Battery back-p facility for pumps of 750 W.
Quattro 12/3000/120 (BB4).
Battery backup facility for all pumps up to 750 W.
60 Ah High Efficiency battery (BB20).
101 Ah High Efficiency battery (BB21).
201 Ah High Efficiency battery (BB22).