NBS Source
List your products

Ronacrete Ltd

Specialist construction products

+44 (0)1279 638700 www.ronacrete.co.uk

Sort by:

Showing 37-44 of 44

Ronafix Pre-packed Wearing Screed 15mm+

Screed 15mm+ is supplied as a pre-packed, two component, ready to use mortar for laying floor screeds. Ronafix Pre-packed Wearing Screed 15mm+ is supplied complete with all the correct dry components in a bag and a bottle of polymer gauging liquid. Ronacrete Standard Primer two part polymer cement bonding agent is required for bonded screed applications. Ronafix Pre-packed Wearing Screed 15mm+ is used to lay new granolithic screeds as thin as 25mm for heavy duty bonded application. Excellent adhesion can be achieved to suitably prepared surfaces and the screed is resistant to water, frost, and to heavy wear. The use of granolithic floating and unbonded screeds is uncommon and advice should be sought from Ronacrete Technical Department.

Ronafix Underfloor Heating Screed Admixture

Ronafix Underfloor Heating Screed Admixture is a liquid polymer admixture which provides a high strength screed. The increased strength of the screed allows it to be laid in thin section, from 40mm, which in turn ensures improved thermal output from the underfloor heating system saving money on energy consumption. Screeds containing Ronafix Underfloor Heating Screed Admixture also dry faster than conventional sand : cement screeds meaning the commissioning process can begin earlier (after only 7 days) and can also be opened to foot traffic after 24 hours. Advantages Thin sectionfrom 40mm Faster commissioning of heating Improved thermal outputheats up much quicker than traditional screeds Can be walked on after only 24 hours

RonaFloor Epoxy DPM

RonaFloor Epoxy DPM is a two pack solvent free, liquid applied surface damp proof membrane designed to reduce the passage of water vapour. It allows epoxy resins to be placed onto concrete even when the Relative Humidity (RH) of the concrete is highup to 97%.

RonaScreed 1 Day Overlay Rapid Drying Screed

RonaScreed 1 Day Overlay Rapid Dry Screed is a cement replacement for rapid drying screeds used when laying bonded, unbonded or floating screeds prior to covering with vinyl sheet or other coverings. The fast drying properties allow screeds to be covered with moisture sensitive finishes as early as one day after application.   Drying times are determined by many factors including humidity, temperature and mixing. An effective damp proof membrane must be in place.

RonaScreed 4 Day Overlay Quick Drying Screed

RonaScreed 4 Day Overlay Quick Drying Screed is used to allow floor coverings to be laid over the screed much sooner than with conventional screeds. Rapid strength gain permits early access by following trades. RonaScreed 4 Day Overlay Quick Drying Screed is supplied as an additive. It allows early laying of floor coverings such as sheet vinyl, tiles and other materials including the range of RonaFloor Epoxy and Polyurethane coatings. RonaScreed 4 Day Overlay Quick Drying Screed is typically incorporated within 35mm to 75mm thick floor screeds and should be laid by competent screeding and floor laying contractors. RonaScreed 4 Day Overlay Quick Drying Screed can be purchased and laid by non-licensed screeding contractors.

RonaScreed 8 Day Overlay Fast Drying Screed

RonaScreed 8 Day Overlay screeding additive is used to quickly reduce the level of retained moisture within the screed allowing floor coverings to be laid over the screed much sooner than with conventional screeds. RonaScreed 8 Day Overlay gains strength quickly, permitting early access by following trades. RonaScreed 8 Day Overlay is supplied in concentrated form and used in low dilution. It promotes rapid drying and early laying of floor coverings such as sheet vinyl, tiles and other materials. RonaScreed 8 Day Overlay is typically incorporated within 35mm to 75mm thick floor screeds and applied by competent screeding contractors. RonaScreed 8 Day Overlay is simple and straightforward to use and can be purchased and laid by non-licensed screeding contractors.

RonaScreed Fast Drying Underfloor Heating Screed Additive

RonaScreed Fast Drying Underfloor Heating Screed Additive is an additive for site batched screeds is used to quickly reduce the level of retained moisture within the screed allowing floor coverings to be laid over the screed much sooner than with conventional screeds. It also promotes high early strength, permitting early access by following trades. RonaScreed Fast Drying Underfloor Heating Screed Additive is supplied in concentrated form and used in low dilution. It provides rapid drying and early laying of floor coverings such as sheet vinyl, tiles, carpet etc. When laying onto insulation the minimum screed thickness is 65mm. Heating pipes require a minimum cover of only 30mm of screed. Time to reach 75% RH 15 days

RonaScreed Self Smoothing Exterior Screed

RonaScreed Self Smoothing Exterior Screed is a flow applied industrial flooring system. It provides a hard, durable floor surface for new floors or for renovating existing surfaces. The material gains strength quickly and can be accessed by foot traffic in 45 hours and by light to medium traffic after 24 hours @ 20ºC. When applied correctly, RonaScreed Self Smoothing Exterior Screed produces a smooth, durable wearing surface. The application thickness can vary, ranging from 5mm to 40mm. For optimum performance and appearance RonaScreed Self Smoothing Exterior Screed should be applied by specialist industrial floor layers with expert knowledge of preparation, mixing and application.

Showing 37-44 of 44