A-Z
Showing 37-50 of 50
Reinforcing Large Format Stack-Bonded Masonry - Ancon AMR Masonry Reinforcement
Leviat
Where large format masonry units are stacked one above the other, the lack of bonding between them will greatly reduce the overall flexural strength of the panel and the ability of the wall to spread vertical loads.
Ancon AMR Masonry Reinforcement, located in the bed joints, will increase the panel’s flexural strength and improve the capacity to resist lateral loads and spread vertical loads.
Shear Load Connectors
Leviat
Ancon connectors can be used for movement joints in floor slabs, suspended slabs, and for replacing double columns and beams at structural movement joints. Applications in civil engineering include joints in bridge parapets, bridge abutments and diaphragm wall construction.
Shearfix Punching Shear Reinforcement
Leviat
Used within a slab to provide additional reinforcement around columns, Ancon Shearfix is the ideal solution to the design and construction problems associated with punching shear. The system consists of double-headed studs welded to flat rails, positioned around the column head or base.
Special Fabrications in Stainless Steel
Leviat
Ancon designs and manufactures high integrity steel components for a wide range of industries including Civil Engineering, Building, Infrastructure, Water Treatment, Nuclear and Mining.
Ancon has a wealth of experience of working with a variety of material grades and boasts an impressive project portfolio. The company has the capability to fabricate all Austenitic, Duplex and Super Duplex stainless steels in a plate thickness of up to 30mm.
All fabrication work is designed and manufactured to suit individual customer requirements and large stocks of stainless steel are maintained in order to meet urgent deliveries.
SSTC/STC Thermally Insulated Balcony Connectors
Leviat
Ancon STC and SSTC steel-to-concrete balcony connectors are used to anchor steel balconies to concrete floor slabs and have been proven through thermal modelling to reduce heat loss when compared to direct connections.
The two-part assembly, comprising a cast-in anchorage and a post-fixed bracket with thermal pad located at the interface, allows for phased construction. Unlike one-piece systems which must be left exposed on-site for some time, the Ancon bracket component is not fixed until required, reducing the risk of damage.
SSTS/STS Thermally Insulated Balcony Connectors
Leviat
Ancon STS (galvanised steel) and SSTS (stainless steel) are compact thermal breaks, typically used for connecting steel balconies to structural steel frames. They are also equally suitable for other steel-to-steel applications.
Staifix Cavity Wall Ties
Leviat
Wall ties for use in external cavity walls should be selected by the 'Types' in PD6697. This document classifies wall ties by strength and use. Wall ties for use in internal separating walls should comply with Approved Document E: Resistance to the passage of sound.
Staifix-Thor Helical Crack Stitching Kit
Leviat
This kit contains all the necessary components to permanently repair vertical or stepped cracks in masonry. Experts in the remedial market have designed the kit’s contents, guaranteeing the correct specification of reinforcing bar, grout and installation tools required for this application and the compatibility of all components.
Stainless Steel Sections & Flooring
Leviat
Ancon designs and manufactures high integrity steel components for a wide range of industries. Primarily, products are manufactured from stainless steel and Ancon is a member of the British Stainless Steel Association.
Starter Bar Systems
Leviat
The Ancon Starter Bar system is designed to increase the speed of construction at joints where continuity of reinforcement is required, or for fixing applications using standard metric bolts or studding. Use of this Ancon system can simplify concrete design and eliminate the need to drill formwork or concrete.
Suspended Brickwork Solutions
Leviat
Deep reveals and soffits are an increasingly popular design feature that add an extra depth and dimension to masonry façades.
Creating these effects can be key but can pose engineering problems as the main building façade must opening, while seeming to be unsupported by structural steelwork.
Tension and Compression Systems
Leviat
Tie bars are increasingly being used in structures and buildings as an architectural as well as a structural element.
In addition to providing a high load capacity, the Halfen Detan range of Tension System meets the demanding aesthetic requirements of today’s applications.
The Use of Stainless Steel in Construction
Leviat
The majority of Ancon products are manufactured from stainless steel. This material offers many advantages to the specifier and its use in the Construction Industry continues to increase. Stainless steel building products ensure a high degree of corrosion resistance without requiring additional protection and are 100% recyclable at the end of their long service life.
Wall Ties and Restraint Fixings
Leviat
Wall ties and restraint fixings are an essential element in the stability of masonry panels.
Leviat manufactures fixings in a variety of lengths and types for restraining brickwork, blockwork and stonework.
Restraints can be fixed to concrete and structural steelwork as well as any type of masonry.
Showing 37-50 of 50