Showing 1-36 of 36
Alcumus SafeContractor accreditation
Heras
Certificate of Accreditation for CRH Fencing and Security Group (UK) Ltd has acheived SafeContractor accreditation
Avetta SSIP certificate
Heras
Avetta certificate awarded to CRH Fencing and Security Group (UK) Ltd in accordance with Avetta assessed SSiP approval agreement
DHF membership
Heras
DHF certificate of accreditation for CRH Fencing and Security Group (UK) Ltd trading as Heras as member of DHF and meets the DHF automated gate safety assured standards
Achilles UVDB Audit Certificate
Heras
Certificate of Audit to certify that CRH Fencing & Security Group (UK) Ltd T/A Heras has achieved the following standards through assessment for Safety, Health, Environment & Quality practices and procedures as a registered supplier on Verify
Innovative Sliding Gate
Heras
The iGate sets new standards of design, functionality and safety in entrance control. The construction and use of high-quality aluminium guarantee reliability and durability. The iGate proves that beauty can also be functional.
The elegant round shapes of the gate and the column combine with the perforated panels of your design to make an unmistakable statement.
The cantilever construction offers a clear width of 3 to 9 metres and the height of the sliding gate can vary from 1.5 to 2.5 metres. The iGate is available with a gate leaf that slides to the left or to the right. Heras delivers your iGate fully preassembled.
Swing Gate
Heras
The B300 swing gate, available in single or double leaf, automated or manual, is a complete entrance control solution for perimeter protection ideal for office buildings, schools and commercial locations.
Avetta membership
Heras
CRH Fencing and Secutiy Group (UK) Ltd trading as Heras became a member of the Avetta Consortium on 31/07/2017
Bi-fold/Bi-folding Speed Gate (Trackless, Top and Bottom Guided)
Heras
The sGate was specifically developed by Heras as a functional solution to combine
the operating speed of a barrier with the security levels of a gate. It is ideal for
situations where the extra space required for conventional hinged or sliding gates
is not available. The sGate opens and closes in a matter of seconds, thus providing quick controlled entry to a location whilst also locking it securely to prevent unauthorized vehicle or pedestrian access.
Bi-folding Speed Gate (Trackless)
Heras
Trackless folding gate offering combination of access control, safety, speed and operational reliability.
Cyber Essentials Membership
Heras
This is to certify that CRH Fencing and Security (UK) Ltd trading as Heras has been assess by DigitalXRAID Ltd against the Cyber Essesntials Scheme Test Specification
Automated Cantilever Sliding Gate
Heras
The safe use of automated sliding gates is more vital than ever. Automated gates are classified as machinery under the EU Machinery Directive (more details on legislation issues are on the back page of this brochure). Safeglide 2 puts safety and compliance as its main priority, followed by reliability and security. It is the only gate on the UK market to be wind-class-3 certified meaning it will work reliably, even in the most demanding of weather conditions.
Bi-folding Speed Gate (Bottom-guided)
Heras
Bottom-guided folding gate offering combination of access control, safety, speed and operational reliability.
Full Height Turnstile
Heras
This full-height turnstile provides easy-to-use, rugged and reliable, high security pedestrian control. Available in a range of configurations, materials and finishes to match a wide variety of security levels, operational and aesthetic requirements. Finishes include high quality polyester powder coatings in a wide range of colours, and optional stainless steel rotors to withstand the harshest external environments.
The heavy duty mechanism with continuously rated solenoids is designed for intensive use. The rubber coupling between rotor and mechanism minimises vibration, noise, bounce-back, and wear on mechanism.
A solid state control unit interfaces to most available access control and membership systems.
Cantilever Sliding Gate
Heras
This single leaf sliding gate boasts the latest technology and has been successfully tested for all relevant safety norms (EN and BS). Furthermore, the complete gate construction is certified for up to Wind class 3 (according to EN12424), making it one of the most robust gates of its type.
The gate frame is square hollow section steel with a choice of infill options including welded-mesh, palisade and
vertical bars. Available in a wide range of widths and heights, the cantilever design has no exposed ground track or wheels to get blocked by dirt or snow. This guarantees trouble-free open/close movements and reduces maintenance.
The main gate beam is lightweight aluminium, and the complete construction is perfectly counterbalanced to allow easy motor-driven operation.
LPCB Product approval A
Heras
LPCB Certificate of Product Approval for CRH Fencing and Security Group (UK) Limited trading as Heras
Products:
Pallas Xtra
Zenith
TangoRail TR100
TangoRail TR200
TangoRail TR150
TangoRail TR250
TangoRail TR300F
TangoRail TR300P
TangoRail TR400
security fencing systems
Standards:
LPS 1175: Issue 6
BuildingConfidence by Achilles Certificate of Audit
Heras
Certificate of Audit from BuildingConfidence, Powered by by Achilles, to certify that CRH Fencing & Security Group (UK) Trading As Heras has successfully passed the Achilles BuildingConfidence audit against protocol
ISO 9001:2015
Heras
BSI Certificate of Registration for quality management system ISO 9001:2015 to certify that CRH Fencing and Security Group (UK) Ltd operates a quality management system which complies with the requirements ISO 9001:2015 for the following scope: design, manufacture, supply, management of installation and maintenance of perimeter demarcation, entrance control and electronic security detection systems.
Heavy Duty Barrier
Heras
The immense strength and electro-hydraulic operation featured in the design of the B411/412 heavy duty barriers make these products ideal for vandal prone, unsupervised applications. These barriers have the performance required for entrance control of the highest usage sites.
CHAS Safety Accreditation
Heras
CHAS certificate of accreditation to certify that CRH Fencing and Security Group (UK) Ltd trading as Heras is accredited within the Contractors Health and Safety Assessment Scheme (CHAS) having demonstrated compliance with and sound management of current health and safety legislation.
Welded Mesh SR3 Fence
Heras
The Zenith SR3 triple-skin mesh fence system is an extremely strong and effective anti-climb fence with a very high security rating (SR3) for crime and terrorist prevention.
The fence is made up of two mesh panels:
A single-skin panel attached to the outer side of the support posts
A double-skin panel attached to the inner side of the posts. The 2 panels forming the double skin are turned 90º to each other and welded together to form a rigid construction
The SR3 rating means the fence can resist prolonged and aggressive forced entry attacks with heavy-duty intrusion tools such as bolt cutters and gas torches for at least 5 minutes. The tightly configured mesh prevents toe or finger holds making it extremely difficult to climb.
ISO 14001:2015
Heras
BSI Certificate of registration environmental management system - ISO 14001:2015 to certify that CRH Fencing and Security Group (UK) Ltd operates an environmental management system which complies with requirements for ISO 14001:2015 for the following scope:
Design, manufacture, supply, installation and maintenance of perimeter demarcation, entrance control and electronic security detection systems.
Noise Barrier
Heras
The Noise reducer is an effective sound wall with high noise insulation and absorption properties. The cleverly designed sandwich construction contains:
- A layer of noise absorbent mineral wool
- A thin metal plate for extra noise insulation
- All encased in a steel U-profile frame with galvanised steel wire-netting surround and HDPE windshield
With their light weight, small footprint and easily installed pre-fabricated format, these barriers are ideal for residential properties, busy roads and school playgrounds. They are also effective for surrounding loud installations such as air conditioning units or transformers. The plant-friendly surfaces of the panels can easily be covered with climbing plants or other decorative vegetation.
Welded Mesh SR1 Fence
Heras
The Zenith SR1 mesh panel fence is a strong and flexible perimeter protection solution.
The fence provides effective anti-climb protection with tightly configured mesh (76.2 x 12.7 mm) preventing toe or finger holds. The strong steel mesh panel is SR1 rated to resist continuous forced entry attempts with a standard intruder toolset (knives, pliers and screwdrivers) for at least 1 minute.
The mesh panels are securely attached to the posts with a flat bar and M8 bolts (with form G washer and nut).
An extra option is to have the mesh buried 300 mm in the ground to prevent intruders tunnelling under the fence (this option is not available if fence posts are mounted on a base plate at ground level).
LPCB Product approval B
Heras
Certificate for Product Approval for CRH Fencing and Security Group (UK) Limited trading as Heras
Products:
Zenith SR2
Zenith SR3
security systems
Standards:
LPS 1175: Issue 7
ROSPA Membership
Heras
Membership Certificates of CRH Fenciong and Security Group (UK) Ltd
SMAS worksafe certificate
Heras
The health and safety management system of CRH Fencing and Security Group (UK) Ltd trading as Heras has been assessed against the SSiP Core Criteria by CHAS and through SSiP deem-to-satisfy the company has been awarded SMAS Worksafe accreditation as a contractor
British Safety Council Membership
Heras
This is to certify that CRH Fencing & Security Group (UK) Ltd as a member of the British Safety Council, is committed to keeping people safe and healthy at work.
Noise Barriers
Heras
The Noise Reducer is a product that confronts the issue of noise pollution. This can be caused by a number of things: children playing, industry, agriculture, heavy machinery, rail and road traffic. Noise is not only detrimental to residential and industrial environments, but in some cases even to personal health and welfare.
A revolutionary product and a potential solution for everyone who is concerned with future and current environmental developments the Noise reducer. The noise isolation and absorption values offer a robust noise barrier that caters for the most varied situations in our busy and crowded living space. The noise reduction wall also protects your privacy and safety by creating a site perimeter and a barrier against intruders.
Secured by design license
Heras
The is to certify that CRH Fencing & Security (UK) Ltd trading as Heras holds a secured by design licence, valid in conjuction with the current schedule.
Bi-folding Speed Gate (Top guided)
Heras
Top-guided folding gate offering combination of access control, safety, speed and operational reliability.
Large cantilever sliding gate
Heras
Strong, welded steel cantilever sliding gate for industrial use. Maximum 18-meter opening between posts give a 17.6-meter free opening. Available with a reliable electric motor drive.
The gate frame is constructed of square hollow section steel with various infill options including perforated sheets, welded-mesh and vertical bars.
Polyamide support/guide wheels and heavy-duty roller bearings ensure smooth and easy movement. All moving components are concealed within the bottom beam for safety and protection against the elements.
The gate is delivered as a pre-assembled module making it very quick and economical to install with no training needed. This means little or no disruption to your business through restricted access during installation and service.
Welded Mesh Fence Systems SR1, SR2, SR3
Heras
Perimeter protection is paramount for utility companies, nuclear power stations,
airports, military sites, and oil and gas terminals. The higher the safety risk
to people, premises and assets, the more important it is to ensure that robust
and effective security systems are in place. Heras Zenith high security mesh
fencing systems are the answer; theyre LPCB certified, extremely safe and
secure, easy to install and designed to last.
The range includes Zenith SR1, SR2 and SR3. They offer a high level of protection against vandalism, intrusion and terrorist
activity thanks to the combination of its
anti-climbing 358 mesh system, secure
foundations and security toppings. The systems has been tested by the Building Research Establishment to gain the necessary security ratings.
Hostile Vehicle Mitigation Barrier
Heras
The Heras 94x series is a range of heavy-duty, vandal resistant dual beam barriers which have been crash tested to PAS 68, achieving an outstanding rating for these stringent HVM crash certifications. The 94x series is scalable, offering the potential to upgrade protection levels if site security requirements are increased.
Incorporating a shallow foundation mounting system, the 94x series is suitable for simple and low-cost installation in a variety of indoor and outdoor environments. Capable of controlling high volumes of traffic, the 94x series is designed to protect high-risk sites where vehicle impact attack is a real threat.
Welded Mesh SR2 Fence
Heras
The Zenith SR2 double-skin mesh fencing system is a strong and effective anti-climb fence with a high SR2 security rating for crime prevention. The SR2 rating means the fence can resist prolonged and aggressive forced entry attacks with heavy-duty intrusion tools such as bolt cutters and drills for at least 3 minutes.
The front and rear skins are turned 90º to each other and welded together to form a rigid construction. The tightly configured mesh prevents toe or finger holds making it extremely difficult to climb.
Self-adjusting Bow Top Railing
Heras
Heras TangoRail Railings are a self-raking railing systems, the flexibility of the panels follow the ground contours providing optimum site safety and security.
The TR800 play is made from vertical tubular bars with horizontal rails, manufactured to RoSPA guidelines ideal when safe systems have to be considered as there are no head, neck or finger traps.
TangoRails exclusive non-welded modular design enables the panels to be assembled after coating; this means each component of the panel can be supplied in different colours. Various colour combinations are available to brighten and suit all perimeters.
Heavy Noise Barrier
Heras
The Noise reducer HA is an extremely effective sound wall with very high noise insulation and absorption properties. The cleverly designed sandwich construction contains:
A layer of noise absorbent mineral wool
A thin metal plate in the centre for extra noise insulation
a second layer of noise absorbent mineral wool
All encased in a steel U-profile frame with a galvanised steel wire-net (front and back) and HDPE windshield
Because of their extra sound protection, small footprint and easily installed pre-fabricated format, these barriers are ideal for protecting residential, municipal, and commercial areas from noisy roads and industries. The solid construction means the panels can be stacked on top of each other to a height of 6 metres.
Showing 1-36 of 36