NBS Source
List your products

Delta Membrane Systems Ltd

Delta Membranes

+44 (0)1992 523523 www.deltamembranes.com

Sort by:

Showing 73-89 of 89

DELTA-TERRAXX Protection and Drainage System for Cellars

Capable of keeping cellars permanently warm and dry, Delta-TERRAXX is an all-round protection and high performance drainage system from Delta Membrane Systems. This product guarantees universal protection from hydrostatic water pressure, seepage, and artesian water as per DIN 18195 when applied as a second waterproof layer on top of existing cellar waterproof sealing. It protects perimeter insulation boards from moisture, safeguards insulation performance, and effectively separates the perimeter insulation from the soil. Delta-TERRAXX has less emissivity and, consequently, enhanced heat transmission resistance due to its silver surface. It can be installed swiftly straight from the roll without additional excavation work thanks to its two-ply structure.

DELTA-TERRAXX Technical Guide - Protection and Drainage System for Horizontal Application

Giving an all-round solution for outstanding protection and drainage in horizontal applications, Delta-TERRAXX features in a 16 page technical guide from Delta Membrane Systems. This guide gives information on the stringent requirements in horizontal applications, along with an overview of technical detail solutions, details on the fast and easy installation, technical data and tender specifications. Delta-TERRAXX helps utilise large flat roofs and ceilings covering underground parking lots and buildings that might otherwise remain unused. This extremely robust protection and drainage system has been optimised for different applications in horizontal drainage. Consisting of a dimpled sheet with a fused-on geotextile, the composite material forms a highly effective drainage layer.

DELTA-TERRAXX The Problem-Solver

Various applications from sites around Europe feature in ‘Delta-TERRAXX – The Problem Solver’, a 16 page brochure from Delta Membrane Systems. Most of the projects featured are in Germany, but there is also a look at the refurbishment of an underground car park in Switzerland, and the construction of a housing estate and underground car park in Italy. Featuring a dimpled sheet with a fused-on geotextile to form a highly effective drainage layer, Delta-TERRAXX is capable of withstanding extreme compression loads – up to 400kN/m2 – and can be installed at depths of up to 10m. Facing up, the geotextile acts as a filter protecting the air gap created by the dimpled sheet underneath.

Delta-Trela Installation Information

Giving protection against corrosion and moisture, Delta-TRELA is an underlay for metal-clad roofs from Delta Membrane Systems. To ensure correct and effective installation, the company offers a two-page installation guide. It shows how this product is installed in horizontal runs, parallel to the eaves, with the dimple texturing facing upwards. This allows the Delta-TRELA to prevent moisture accumulation under metal roofs, and eliminate the risk of corrosion.

Flat Green Roof Systems for Gardens, Terraces, Walkways & Parking

Developed from innovative ideas and manufactured in leading-edge production facilities, the top-quality products made by Dörken GmbH & Co. KG for foundation protection, waterproofing, and drainage set standards for reliability, durability, and energy conservation. Located in the Westphalian town of Herdecke, the company traditionally offers its clients top-quality products and customised solutions. Having lived up to this standard for more than 100 years, Dörken is and will always be a powerful partner for planners, dealers, and craftsmen.

KB Flex Test Report hydrostatic-head

Koster KB-Flex 200 is a permanently plastic, damp and waterproof sealing compound for waterproofing against pressurized water. Koster KB-Flex 200 is a permanent plastic sealing compound ideal for sealing pipe and cable penetrations, cavities and for custom detail waterproofing solutions against moisture and pressurized water.

Koster Deuxan 2C Declaration of Performance

Koster Deuxan 2C Declaration of Performance. Every Declaration of Performance can be identified by a unique identification code for the product type (= DoP-code). The document applies when a construction product is covered by a harmonised standard or conforms to a European Technical Assessment. The DoP details the product and the standard and contains information about its performance in relation to the essential characteristics defined within the applicable harmonised technical specification. As from 1July 2013 CE marking must be applied to a product which has either a current DoP or apreviously issued Declaration of Conformity (DoC) under the Construction Products Directive (CPD). The manufacturer through provision of a DoP assumes legal responsibility for the conformity of the product.

Koster NB 1 Grey Declaration of Performance

The document applies when a construction product is covered by a harmonised standard or conforms to a European Technical Assessment. The DoP details the product and the standard and contains information about its performance in relation to the essential characteristics defined within the applicable harmonised technical specification. As from 1July 2013 CE marking must be applied to a product which has either a current DoP or apreviously issued Declaration of Conformity (DoC) under the Construction Products Directive (CPD). The manufacturer through provision of a DoP assumes legal responsibility for the conformity of the product.

MemTech Ground Gas Protection

Gas protection is a technical solution to prevent or to control gas penetration into properties and structures. Gas protection systems are critical in projects constructed on land affected by permanent ground gas and/or volatile organic compound (VOC) contamination. Greater emphasis on appropriate gas protection measures have been brought about by the issue of BS 8485: 2015+A1:2019 Code of Practice for the Design of Protective Measures for Methane and Carbon Dioxide Gases for New Buildings. All ground gas (Methane, Carbon Dioxide, Radon, VOCs, along with others) protection systems should be designed in accordance with the most up to date Guidance and Regulations.

MemTech Pro Void Vent 25 Ancillary Brochure

The MemTech gas protection range provides a comprehensive spectrum of gas protection products and ancillaries to protect buildings and structures from ground gases such as Radon, Methane Carbon Dioxide and VOCs conforming to the requirements of BS 8485:2015+A1:20019, for both above and below ground applications. MemTech Membranes offer solutions to properties, construction sites and land which is affected by contamination. Our ground gas protection ventilation products are suitable for a variety of construction methods. Gas venting systems such as the Pro Void Vent 25 range will safely release harmful ground gases from beneath structures into the atmosphere.

Puddle Flange Product Data Sheet

A Puddle Flange is a waterproof seal for when a pipe passes through a slab to prevent water ingress. A puddle flange is recommended to prevent ground water percolating through the slab between the 110mm pipe work and RC slab and reduces charge on the Delta floor membrane. Delta can provide this in various sizes from 32mm up to 160mm.

Technical Guide - Protection of Drainage Systems for Horizontal Application

Three products from the Delta Membrane Systems portfolio are featured in a 12 page technical guide for protection and drainage systems for horizontal applications from the company. The three products highlighted are Delta-TERRAXX, Delta-GEO-DRAIN and Delta-DRAIN. Included in the brochure is information on the stringent requirements in horizontal applications, a look at horizontal drainage layers, and details of certified safety under permanent loading. Protection of compression-sensitive waterproofing and insulation boards in inverted roofs is also explained. All products offer fast and easy installation. A technical data overview on each of the products gives the reader details on information such as contact area, compressive strength (transient loading and permanent load).

Technical Planning - For Foundation-wall Protection, Drainage and Waterproofing

Comprehensive technical planning information using products from Delta Membrane Systems for foundation wall protection, drainage and waterproofing, is given in this brochure. Included in the brochure are details on the efficient protection from damp and water for buildings, cellars, underground parking lots and tunnels. Also given are the important codes regulation waterproofing and drainage. Many Delta products are highlighted bringing protection and drainage solutions for compression-resistant and compression-sensitive vertical and horizontal waterproofing applications. Alternative sub-base course for floor slabs free from static loading, surface gas drainage systems, DPCs at the building’s basement, and a system for rehabilitating damp walls from the inside are detailed.

Water Based Epoxy

Suitable for all applications where concrete or masonry require protection or waterproofing, Water Based Epoxy is a twin-pack coating available from Delta Membrane Systems. It can be used as a membrane to prevent rising damp in floors and walls, and can be used on concrete and block surfaces. It can also be used as a sealing coat for materials containing asbestos. Other potential applications include as a wall coating in areas of food manufacture and storage, as a tank lining for protection against mild chemicals, and as an anti-lime pre-treatment on new concrete. Preparation and application are particularly easy, with a tough cure being achieved in 4hr., hard dry in 12hr., and maximum cure in eight days.

Wetroom System (Aquaproof)

The Aquaproof System has been developed specifically to prevent water leakage from tiled areas, including wetrooms, shower areas, bathrooms and kitchens.

Showing 73-89 of 89