NBS Source
List your products

ARDEX UK Ltd

High Performance Flooring and Tiling Products

+44 (0)1440 714939 ardex.co.uk

Sort by:

Showing 1-36 of 122

ARDEX 2365 Universal

ARDEX AF 2365 Universal is a water-based, low odour, solvent free, acrylic, emulsion-based floorcovering adhesive. ARDEX AF 2365 offers excellent application properties and is protected from biodegradation and has good resistance to plasticiser migration.

ARDEX AF 2365 meets the requirement guidelines for the EMICODE licence ‘EC1 PLUS’, achieving the lowest possible emission limits.

ARDEX AF 2365 is a true universal adhesive, ideal for installing all types of vinyl floorcoverings, textiles, linoleum and rubber up to 2.5 mm thick. ARDEX AF 2365 can be used with all ARDEX latex and water-based levelling and smoothing compounds in both commercial and domestic locations.

  • High temperature resistance, suitable for use over underfloor heating systems
  • Solvent free
  • Covers up to 67 m2

ARDEX A 125 Fine Finishing Render

ARDEX A125 is a grey, cement-based, fine coat finishing render for walls and ceilings. It is mixed with water to produce an easily worked, slump-free mortar which dries to a hard wearing, water and weather resistant finish, with a smooth, dense surface suitable for painting.

Features:

  • Ideal for skim coat wall and ceiling rendering - apply up to 5 mm.
  • Finishes to a smooth surface suitable for painting.
  • Fast track - ready to receive decorative finishes the next day.
  • Extended pot life of four hours.
  • Provides a hard wearing surface.
  • Water and weather resistant.
  • Suitable for internal and external locations.
  • Non-combustible – Class A1 in accordance with EN 13501-1.

Applications:

Used for levelling and smoothing over surface irregularities on wall and ceiling backgrounds such as concrete, brickwork, blockwork and previously applied cement/ sand renders prior to applying paints and other cement-resistant decorative coatings. It is suitable for internal and external use and is an ideal solution for areas subject to moisture such as swimming pool halls and underground tunnels. Low strength backgrounds such as lime/ sand renders are not suitable surfaces to apply ARDEX A125.

ARDEX A 18

Screed bonding cement with colour indicator.

ARDEX A 23

Rapid Drying Cement for Internal Screeds.

ARDEX A 29

ARDEX A 29 cement for screeds has been developed to perform in real site conditions. Offering application and performance benefits to professional screeding contractors; ARDEX A 29 combines excellent workability, speed and performance.

Features:

  • 90 minute working time (at 20°C).
  • Walkable after 8 hours (at 20°C).
  • Install ceramic tiles after 24 hours and natural stone after seven days.
  • Install resilient and wood floor finishes after seven days.
  • Apply as a bonded, unbonded or floating screed.
  • Can be pumped for fast application.
  • For internal and external use, including wet areas.
  • BRE Screed (ISCR) Test: Pass in 24 hours.

ARDEX A 35 MIX Pre-Blended Rapid Drying Screed

ARDEX A 35 MIX contains one part ARDEX A 35 quick drying cement and four parts, by weight, of screeding sand, requiring only the addition of water. Use for the installation of new screeds or for repairs to existing screeds where rapid setting and drying is required. Can be used to produce bonded, unbonded or floating screeds and will be dry after 24 hours at 20°C to receive floor finishes, regardless of thickness.

Thickness:

When used as a repair mortar ARDEX A 35 MIX can be applied to the full thickness of the existing screed. When applied as a new screed, application at the following thicknesses is recommended:

  • Bonded screeds: Minimum 15 mm, (design thickness up to 40 mm).
  • Unbonded screeds: Minimum 40 mm.
  • Floating screeds: Minimum 75 mm (Minimum 65 mm in lightly loaded (domestic) locations).

ARDEX A 35 Ultra Rapid Drying Screed Cement

ARDEX A 35 is a special cement used in place of Portland Cement in cement:sand screeds for producing a rapid setting and drying floor screed that can be used as a bonded screed, an unbonded floor screed laid onto a membrane, or a floating screed laid onto compressive quilt or insulation material. It will be dry after 24 hours at 20°C to receive floor finishes, regardless of thickness.

Screed thickness:

The following thicknesses are recommended for screeds using ARDEX A 35:

  • Bonded screeds: Minimum 15 mm (design thickness up to 40 mm).
  • Unbonded screeds: Minimum 50 mm.
  • Floating screeds: Minimum 75 mm (minimum 65 mm in lightly loaded (domestic) locations).

Mix proportions:

  • Heavy duty: A 1:4 mix is recommended where a very heavy duty floor is required.
  • Standard: A 1:5 mix is recommended for all normal screeding situations.

ARDEX A 38 MIX

Pre-blended ultra-rapid drying cement for internal and external screeds.

ARDEX A 38 MIX Pre-Blended Rapid Drying Screed

ARDEX A 38 is a special cement for producing a rapid setting, hardening and drying floor screed for internal or external use, including swimming pools, allowing ceramic tiles or stone to be fixed after only four hours, even on unbonded and floating screeds. ARDEX A 38 can be used to produce a bonded screed, an unbonded floor screed laid onto a membrane, or a floating floor screed laid onto a compressive quilt/ insulating material.

Features:

  • Rapid hardening – walkable in three hours.
  • Receives ceramic and natural stone tiles directly after only four hours for bonded, unbonded and floating screeds.
  • Install resilient, wood finishes and vinyl floor coverings after 48 hours.
  • After only one day the compressive and tensile bending strengths of ARDEX A 38 exceeds the acceptable minimum attained by an ordinary cement screed after 28 days.
  • Can be used with underfloor heating systems.
  • Can be pumped for fast application.

ARDEX A 38 Ultra Rapid Drying Screed Cement

ARDEX A 38 is a special cement for producing a rapid setting, hardening and drying floor screed for internal or external use, including swimming pools, allowing ceramic tiles or stone to be fixed after only four hours, even on unbonded and floating screeds. ARDEX A 38 can be used to produce a bonded screed, an unbonded floor screed laid onto a membrane, or a floating floor screed laid onto a compressive quilt/ insulating material.

Features:

  • Rapid hardening – walkable in three hours.
  • Receives ceramic and natural stone tiles directly after only four hours for bonded, unbonded and floating screeds.
  • Install resilient, wood finishes and vinyl floor coverings after 48 hours.
  • After only one day the compressive and tensile bending strengths of ARDEX A 38 exceeds the acceptable minimum attained by an ordinary cement screed after 28 days.
  • Can be used with underfloor heating systems.
  • Can be pumped for fast application.

ARDEX A 46 Multi-Purpose External Repair Mortar

A 46 is a rapid setting and hardening, slump free mortar which is ideal for external or internal repairs. The mortar sets and hardens rapidly to give a repair of exceptional strength and hardness. The mixed mortar sets after 20 minutes and can be trafficked after only two–three hours at 20°C. A 46 is ready to receive floor coverings that are not sensitive to moisture, such as ceramic tiles, after 24 hours at 20°C.

Features:

  • For infilling holes around fittings and for patch work on wall and floor areas.
  • Internal and external use.
  • Rapid hardening – walkable in two–three hours.
  • For repairing stair treads and risers.
  • To produce gradients for ramps.
  • To smooth wall and floor areas from 2–30 mm thick.
  • Easy to smooth and float.
  • Stress and crack free.
  • Wearing surface in lightly trafficked areas.
  • Ideal for patch repairs prior to the application of suitable damp proof membranes.
  • Freeze, thaw and salt resistant.
  • Suitable for underfloor heating.

Technical properties:

  • Compressive strength (after 1 day/ 7 days/ 28 days): 10.0/ 15.0/ 20.0 N/mm².
  • Tensile bending strength (after 1 day/ 7 days/ 28 days): 2.0/ 4.0/ 6.0 N/mm².

ARDEX A 55

Ultra Rapid Drying Levelling and Smoothing Compound.

ARDEX A826

Ultra-fine finishing plaster.

ARDEX A828

Filling compound and smoothing plaster.

ARDEX A950

Multi-purpose renovation compound.

ARDEX AF 145

Pressure sensitive vinyl adhesive.

ARDEX AF 145 Pressure Sensitive Vinyl Adhesive

ARDEX AF 145 is a water-based, solvent free, low odour, pressure sensitive and wet bond acrylic emulsion-based floorcovering adhesive. With a reduced airing, and long open time, ARDEX AF 145 offers excellent application properties and produces a high bond strength with permanent high tack.

Features and benefits:

  • Ready to receive floorcoverings in as little as 20 minutes.
  • Can receive vinyl sheet up to 80 minutes after airing.
  • Excellent early and long term adhesive strength.
  • Can also be used as a wet bond adhesive.
  • High temperature resistance, suitable for use over underfloor heating systems.
  • Solvent free.

ARDEX AF 165

ARDEX AF 165 Vinyl Adhesive is designed to offer excellent early and long term adhesive bond strength, ideal for installing all types of vinyl sheet floorcoverings.

Features:

  • High initial tack.
  • Can receive floorcoverings up to 30 minutes after airing.
  • High temperature resistance, suitable for use over underfloor heating systems.
  • Solvent free.

ARDEX AF 175 Luxury Vinyl Tile Adhesive

 

Fibre-reinforced to offer the following benefits:

  • Minimises lateral movement during installation.
  • Eliminates adhesive squeeze between tiles and planks.
  • Improved indentation resistance.
  • Install tiles and planks after just 5 minutes.
  • Walk on after 2 hours.
  • High temperature resistance, suitable for use over underfloor heating systems.
  • Solvent Free.
  • Covers up to 56 m².

 

ARDEX AF 200 Plus Uncoupling Matting Adhesive

AF 200 is a water-based, low odour, solvent free, high quality dispersion adhesive based on synthetic resin/ rubber emulsion with mineral fillers.

Features:

  • Suitable for adhering Schlüter®-DITRA matting to timber floors.
  • High initial tack.
  • Extended tack time.
  • Economical.
  • Water-based, solvent free formulation.
  • Very low odour.
  • Easy to apply.
  • Suitable for underfloor heating.

ARDEX AF 2525 Two Part Heavy Duty Adhesive

Two component heavy duty adhesive.

Features:

  • Moisture, weather and water resistant.
  • Suitable for internal and external use.
  • High temperature resistance, for use in areas of direct sunlight e.g. conservatories.
  • Very high bond strength, for use in high load areas.
  • Easy to mix and apply.
  • Very low emissions.
  • Solvent free.
  • Covers up to 20 m².

 

ARDEX AF 2575 Heavy Duty Flooring Adhesive

ARDEX AF 2575 is ideal for installing all types of luxury vinyl tiles, sheet floorcoverings, artificial grass in exterior locations, and can be used with all ARDEX Latex and Water-Based Levelling and Smoothing Compounds in both commercial and domestic locations.

Features and benefits:

  • Moisture, weather and water resistant.
  • Suitable for internal and external use.
  • High temperature resistance, for use in areas of direct sunlight e.g. conservatories.
  • Very high bond strength, for use in high load areas.
  • Very low emissions.
  • Solvent free.

ARDEX AF 325 Carpet Flooring Adhesive

Carpet adhesive.

Features:

  • Excellent early grab means that carpet can be installed immediately.
  • 20 minute extended working time.
  • Rapid strength development.
  • High temperature resistance, suitable for use over underfloor heating systems.
  • Solvent free.
  • Low odour.

ARDEX AF 625 Contact Adhesive

Heavy duty contact adhesive.

Features:

  • Fast drying, creating an instant bond ideal for vertical applications.
  • Floors can be trafficked immediately after installation.
  • Easy to apply with a brush or fine serrated trowel.
  • Apply floor coverings etc. into dry adhesive.
  • Resealable container reduces waste.
  • Covers up to 40 m².

 

ARDEX AF 785 Linoleum Adhesive

ARDEX AF 785 is ideal for adhering all types of linoleum sheet and tiles, and can be used with all ARDEX Latex or Water-based Levelling and Smoothing Compounds in both commercial and domestic locations.

Features and benefits:

  • High initial grab.
  • Install linoleum immediately after application.
  • Excellent adhesive transfer to the floorcovering backing.
  • Excellent early and long term adhesive strength.
  • High temperature resistance, suitable for use over underfloor heating systems.
  • Solvent free.

ARDEX AF 825 Carpet Tackifier

Surface tackifier.

Features:

  • Install floor coverings in as little as 10 minutes, or up to 24 hours after application.
  • Instant release allows worn or damaged tiles to be removed easily.
  • Suitable for raised access flooring.
  • High temperature resistance, suitable for use over underfloor heating systems.
  • Extremely low odour.
  • Solvent free.
  • Covers up to 125 m².

 

Showing 1-36 of 122