Anderson, GEC Ltd

A highly sustainable Education & Visitor Centre is nearing completion alongside a historic landmark in a south London park, with the fit out including the installation of stainless steel sinks, work-surfaces and shelving units, supplied and installed by sector specialist, GEC Anderson. 

A GEC Anderson stainless steel counter and splashbacks were recently deployed in the new meeting room and ancillary facilities at St Mary’s Church, Wivenhoe. The historic Parish Church of Wivenhoe is thought to be built on Roman foundations and is the oldest remaining building in this small riverside town in Essex. Against this historic background, the new space, designed by Inkpen Downie Architecture, provides a light and airy addition that includes a small kitchen and servery. Stainless steel was specified for the curved counter and for the splashbacks within the kitchen itself. The specified units were supplied and installed by GEC Anderson, under the supervision of local contractor, Bakers of Danbury.“This was a nice project to have been fortunate enough to be involved with and, in my opinion, is a great example of how well new can sit with old. Functionality goes hand in hand with the high quality, smart but informal appearance. The sense of space created by the extension to the main building is impressive and surely a great asset to the Church and its community.” Martin Tye, Managing Director of GEC Anderson.GEC Anderson specialise in made to measure stainless steel worktops, sinks, cabinets and shelving that have been successfully specified in a wide variety of projects and locations. A full measuring and installation service is also provided.

The Old Saltings has been created on the middle floor of a nineteenth century saltings, situated right on the beach at Porthmeor in St Ives, Cornwall. What was once a place where pilchards would have been packed and salted, has now been dramatically transformed into a stunning contemporary apartment sleeping up to 8 guests.The spacious kitchen has been designed to make the most of the sea views as well as top of the range appliances and fittings. The brushed-satin stainless steel sinktop from GEC Anderson further enhances the light and contemporary living space. Practical, twin sink bowls are seamlessly integrated within the continuous stainless steel worktop-run that also includes an integrated hob. The back upstand provides water safe and hygienic detailing that is typically demanded by discerning and knowledgeable specifiers.Architect Cany Ash of Ash Sakula said, “The GEC Anderson stainless steel worktop provided edge detailing and a finish which was better than the usual alternatives normally associated with catering applications. We especially like the jointless, continuous nature of the surface area. The other benefit of stainless steel is that it is hard wearing, which is very important in a holiday apartment where it will get significant use.

Deny’s Holland House, located in London’s Camden Road was the subject of a recent and total refurbishment by specialist contractor, ITC Concepts.Within the specification were stainless steel worktops to a total of 13 kitchens. Each kitchen is designated for shared use by student occupants of the various apartments. As such, the need for a durable, safe and hygienic facilities lead to the specification of seamless worktops with integrated sinks and anti-drip edge profiles. GEC Anderson were able to produce the prescribed configurations and detailing that were called for. In this instance, installation was handled by the contractor but, when called upon to do so, GEC Anderson offer a full measuring and installation service for their range of stainless steel sinks, worktops, cabinets, shelving and splashbacks.GEC Anderson offer a wide range of options and details such as sink sizes, edge profiles and upstands. Full details can be found at: www.gecanderson.co.uk

A recent upgrade to the prestigious Empress State Building for the Metropolitan Police was conducted by main contractor, Overbury.As part of the works, stainless steel shelving by GEC Anderson was specified to the vistor’s property store room. The room was very irregularly shaped and so the shelving (5 tiers of 500mm wide shelves) was specially made to suit. A total of 75 metres of shelving was supplied and installed by GEC Anderson for specialist sub contractor, BA Joinery.

The General Medical Council protects patients and improves medical eduction and practice in the UK by setting and upholding standards for students and doctors.GEC Anderson were employed to supply and install new worktops within its HQ building, located on London’s Euston Road. The project was undertaken by Carmelcrest who asked GEC Anderson to provide the new 5m worktop within the Pantry Kitchen. Access to the room was fairly restricted and, as it was on one of the upper floors of the tower, it was necessary to supply it in two sections. A clamp-joint was used to provide the near seamless and hygienic join. Two sinks were included at one end of the worktop whilst the other end provides the clear, plain, work surface required within the busy kitchen space.

Stainless steel ward kitchens by GEC Anderson Limited were specified within new ward facilities at Southend Hospital. The units were chosen and specified by Architects, The Livemore Partnership.Stainless steel worktops with integrated sink bowls and mounted on stainless steel base cabinets were included alongside stainless steel wall cabinets and shelving. 

Description: Multi-station basin tops for staff wash rooms supplied in single piece straight runs or L-shapes (some exceeding 5 metres in length). All units supplied with integrated bowls and deep front shroud.

The Haggerston West & Kingsland development is a residential housing scheme undertaken and operated by the renowned L&Q group. Several blocks of buildings were featured within the project. A community kitchen was included within Block B. Project architects, PRP specified the kitchen to be in stainless steel and GEC Anderson were awarded the task of supplying and installing the required units as well as the various electrical and gas appliances. The fully stainless steel kitchen was laid out in a symmetrical configuration and includes two sink areas, base cabinets, wall cabinets and drawer units. All units were lockable.Other areas of the project were also supplied by GEC Anderson, including the nursery and baby change facilities. 

A & E department toilet facilities are in constant use, around the clock. It is therefore of paramount importance that they remain in good working order and with minimal maintenance. Clean, smart, professional and safe sanitary appliances are really what is expected in this environment.When it came to upgrading the facilities at Birmingham’s Heartlands Hospital, the decision was taken by the Estates Department to use WCs and urinals from stainless steel specialists, GEC Anderson Limited. Even though the cost of stainless steel sanitaryware can be significantly higher than alternatives, initially. However, when service life, maintenance issues and facilities out of service are taken into account, this cost can very soon be outweighed.

Multiple, shrouded, wash troughs for 'airside' staff washrooms were provided as well as [DDA compliant] V216 HCP wash hand basins located in all accessible washroom cubicles.Following a very specific design brief, the purpose made wash troughs were produced in order to meet the dual needs of a specific aesthetic appearance but also high durability. The heavily used airside washroom facilities are required to remain in full working order on a continuous 24 hour basis and so any possible cause of wear or tear must be minimised. By choosing the durable medium of stainless steel and also then fully enclosing pipework and services, a highly durable professional and hygienic environment is created for its users.The V216 HCP has an ultra low profile to facilitate wheelchair access. Pipework is also fully concealed.All units were produced in EN 1.4301 grade brushed satin stainless steel.

Made-to-measure stainless steel worktops, by GEC Anderson, were recently specified by Munkenbeck and Partners at the highly desirable city space known as 55 Gee Street, Clerkenwell.The funky, new build, mixed-use development comprises offices, shops and six, high-end apartments. Four flats have two bedrooms, a two bedroom duplex occupies ground and basement levels whilst the 150 m penthouse has three bedrooms. Previously the site was occupied by a building belonging to Her Majesty’s Stationery Office.Outside, the distinctive street facade resembles a Jenga block game, made up of extruded airbricks, randomly assembled. The bricks allow natural cross ventilation through the wall without having to make the glass panels move.Inside, the contemporary living spaces are high tech and high quality. Concrete, wood, stainless steel and glass dominate the open, elegant and functional spaces. The continuous and expansive stainless steel worksurfaces blend-in perfectly within their neutral and effortless surroundings. Formed in one piece, the GEC Anderson custom stainless steel worktops include integral sink bowls and edge detailing. Full height splashbacks are included to alcove worktops whilst the striking penthouse kitchen includes a stainless steel island element.Stainless steel worktops and splashbacks still are often associated with only commercial kitchens. However, discerning specifiers have always recognised stainless steel as an interesting, practical and versatile worktop material for residential kitchens. GEC Anderson, with its high quality, brushed satin, stainless steel worktops has helped to promote the popularity of stainless steel within this environment, since the early Sixties.Alfred Munkenbeck, Munkenbeck and Partners, chose GEC Anderson worktops because they could be made in one piece, to the exact size and shape required and with the desired edge profiles, sink bowls and details. The highly specific requirements and details are matched by the quality, appearance, design honesty, integrity and practicality demanded by the apartment settings.GEC Anderson stainless steel worktops and splashbacks are made to order in any shape or size, with seamless finish and no visible joins or junctions. The Touch kitchen units, from OIKOS, were supplied by Eurobath Trading UK. A full measuring and installation service was provided by GEC Anderson for main contractor, Morgan Sindall.

GEC Anderson stainless steel worktops were recently specified by Architects, Dannatt Johnson within the new Learning Spaces and Tea Points within the historic and acclaimed museum. Working for kitchen and bathroom specialists, Brandt Kitchens, GEC Anderson supplied and installed a total of four areas, all within the remit of main contractor, Buxton Building.  Bespoke stainless steel worktops were deployed in two Tea Point and two Learning Spaces. GEC Anderson were able to meet the special detailing requirements prescribed for the various units. 5.0mm SolidTop worktops were specified for the Tea Points that included double sinks and provision for Zip hot water taps and drip trays. In the Learning Spaces, made to measure sink tops with lipped edges and integral back upstands were located in ‘hide away’ areas, behind sliding door sections of the rooms. Managing Director of GEC Anderson comments “This was a really nice project to have been involved with and, actually, is a great showcase of some of the many options that we are able to offer. For instance, in the Learning Space on Level 2, special sized sink bowls were required to fit within the bespoke [narrow] space available, whilst at the same time having space for our lipped edge detail (3) at the front and sides of the worktop perimeter, as well as our upstand edge (10) at the back.  Meanwhile, in the Tea Points, we had the exiting new 5.0mm SolidTops (solid stainless steel, as opposed to the normal, folded, edges). The result of using this detail is always striking with its slim simplicity of form.”

Made-to-measure brushed satin stainless steel sinks and worktops, from GEC Anderson, have been installed in the breathing apparatus rooms, kit cleaning rooms and kitchens of the new Winchester Fire Station.The station relocated from its home of 74 years at North Walls to its new state-of-art facility inEaston Lane, Winnall,Winchester. The new five-bay fire station is operationally and strategically located on the outskirts of the city on a major access route, close to the M3. The new facility can accommodate 70-plus personnel and provides a continuously crewed facility as opposed to the previous just day-crewed arrangement, thus providing faster emergency cover over a greater area.Freestanding worktops, totalling more than 10 metres, were installed in the breathing apparatus (BA) room and kit cleaning area of the fire station. Industrial sized sinks were included to provide an effective washing facility for the fire crews specialist equipment. Sarah Collins, architect for Hampshire County Councils Property Services Department said, The specialised sinks were chosen for their ability to cope with an environment of high usage. We wanted a material that was robust enough to take the everyday knocks and last for the lifetime of the building. GEC Anderson sinks certainly met this requirement and are performing extremely well.

A Somerset based kitchen designer and supplier of bespoke appliances, as well as units and islands, has called on the services of GEC Anderson for the fit-out of her own home.

GEC Anderson stainless steel worktops and units were recently specified within the heart of historic Lancaster Castle.Until 2011, the castle was used as a working prison and courtroom but an ongoing modernisation program is now underway. Educational and visitor facilities to this important legacy make the historical facts available to everyone. Building Design Partnership were employed to deal with this work and GEC Anderson worked with main contractor, Manchester and Cheshire Construction. A continuous stainless steel worktop with integral sinks and stainless steel supports was supplied and installed by GEC Anderson. The unit was tailored to fit within the original, angled, stone wall.

Stainless steel island top with cut-out for hob and deep edge profile (GEC Anderson edge 7). Various worktops, shelves and panels.All in EN 1.4301 grade brushed satin stainless steel.

A series of stainless steel worktops were specified within classrooms of this Mid-Glamorgan Primary School.A clean, neat and highly resilient result was achieved through the use of continuous worktops, with integrated sinks. Lipped edges (edge 3) were included to prevent spillage and to prevent items rolling-off the worktop onto the floor. Integral upstands were specified to the junctions between the worktop and walls, providing a highly practical and lasting result. 

Staff and student beverage point with integrated bowl and up stand. Supplied in two pieces with clamp joint to facilitate access to this award winning building.

GEC Anderson stainless steel worktops with ultra-thin edge profile and integrated sink were included in this recent residential project in London.The sinktop is 4.8m long and was produced in one, continuous piece and includes sink A50. The opposing island also has the ultra-thin (15mm) edge but incorporates a breakfast bar.Worktops are in EN 1.4301 grade brushed satin stainless steel.

Bespoke kitchen designer, Connaught Kitchens has chosen a GEC Anderson made to measure stainless steel worktop for display in its newly renovated showroom in London.Connaught Kitchens, situated in Porchester Place near Hyde Park has 22 years experience in designing bespoke kitchens for end users as well as designers, architects and developers. Driven by an acute attention to detail and an emphasis on providing a quality service from conception to completion, this privately owned company produces beautiful, yet practical kitchens. Design Director and Founder of Connaught Kitchens, Phillip Ozorio said, the installation of the stainless steel worktop formed part of our recent showroom makeover. We wanted to showcase an eclectic mix of kitchen finishes and stainless steel was a material we felt important to feature.

A recent upgrade to ward kitchens included the provision of stainless steel worktops, basins and base cabinets, by stainless steel specialist, GEC Anderson Limited.In a phased upgrade program, the Foundation Trust approached GEC Anderson directly to agree detailing, specifications and costings for the various ward kitchens. The scope of work included bespoke worktops, sinktops, base cabinets and wall-hung wash basins.The results are professional, hygienic and durable kitchens that will stand the test of time for the Trust.

Four metres of stainless steel provides a ‘model’ worktop solution for one of the UK’s top fashion and photographic model agencies. Take 2 Model Management had the worktop installed in its new London offices, where it plays a key role in boardroom catering. The worktop was supplied by GEC Anderson, specialist in made-to-measure stainless steel products.Take 2 has on its books many top international and local models who feature on fashion catwalks and in campaigns for leading brands. Founded 25 years ago by Melissa Richardson and Gabriella Palmano, the agency was based in Covent Garden until its recent relocation to a converted 19th century warehouse at Willow Street, Shoreditch, the heart of London’s fashion district. The new premises includes a modern fourth storey boardroom, which is also used for general meetings and corporate events, necessitating a stylish and well-appointed kitchen-bar.  Bespoke manufacturer Woodbury Furniture Company was commissioned to build the kitchen-bar, with a stainless steel worktop specified by the architect. Woodbury designer Matthew King says: “We approached GEC Anderson for the worktop as we had worked with them on several previous commissions. They offer a wide choice of edge details and upstands, and can be relied on for seamless joins and a perfect fit.” The worktop was supplied in two sections to facilitate handling into the boardroom – via a spiral staircase. The sections were mounted on top of storage units and appliances and were clamp-jointed on site to provide a virtually seamless finish. A cut-out to accommodate a glass-top hob was provided, along with an integral 500mm x 400mm sink from GEC Anderson’s standard range. Melissa Richardson says: “It’s great – it looks lovely and it’s working well for us.” Woodbury and GEC Anderson also provided a 700mm stainless steel-topped teapoint with a 300mm diameter sink to serve staff and visitors on the lower floors.   Based near Exeter, Woodbury Furniture Company has a small team of craftsmen who produce custom furniture and kitchens in a variety of styles from traditional to contemporary. Matthew King says: “Stainless steel is an excellent choice for worktops because its seamless finish virtually eliminates the risk of leaks affecting storage or appliances.”  The GEC Anderson worktop and teapoint at Take 2 are made from satin finish stainless steel, which provides a hard-wearing surface that is easy to maintain to high standards of hygiene and retains an attractive appearance for many years. Founded in England in 1962, GEC Anderson has pioneered the development of made-to-measure stainless steel products. Today, the company’s range includes bowls, worktops, cabinets, shelving and sanitaryware for use in domestic, commercial and specialist environments. All products are manufactured to ISO 9001 and backed by a comprehensive support service from planning and product specification to installation and maintenance.

Split-level stainless steel sinktops and splashbacks were specified in the educational visitor area as well as to the baby-change units and washrooms.20mm edge (7) provide a clean and simple aesthetic and the the worktops include integrated sink bowls Le50. Splashbacks were added for additional durability and functionality. All in EN 1.4301 grade brushed satin stainless steel.

Web developers, Mission Communications, were looking to make a positive impact on visitors to their West End offices. Stainless steel specialists, GEC Anderson ,were asked to provide the stainless steel elements, comprising surface, side-panels and shelf components that formed part of the main reception counter. With some imaginative use of lighting as well as glass panes, the result was very creative but also highly professional looking. Behind the main counter were some other stainless steel worktops as well as sinks that formed part of the office tea point and catering facilities.GEC Anderson’s usual EN 1.4301 grade brushed satin stainless steel was used throughout.

A large number of Decimetric modular stainless steel sinks, from GEC Anderson, were specified for the Environmental Science Laboratory at The University of Liverpools new Central Teaching Laboratories (CTL) for the Faculty of Science and Engineering. The specification called for a high performance and durable solution that was easy to maintain.Decimetric sinks provide a flexible and versatile framework of sizes in 100mm x 100mm increments so as to enable versatility and easy specification. This particular project required large double sink bowls (400 x 400 x 250m deep) set in 1400 x 600mm tops. Each sink was fitted with GEC Anderson V220 Sand Traps to collect solids and to prevent blockages.The bulk of the sinktops were installed on the first floor Environmental Science Laboratory situated in the East Wing. They run the full length of the windowed wall and provide washing facilities for 170 individual work stations.The client demanded high specification of internal fittings and a high concentration of laboratory fittings which would endure heavy usage during their life time. Hard wearing and highly functional, the professional grade brushed satin stainless steel tops provide a long life with very low maintenance. Torsten Bauszus from ADP LLP Architects said, GECA were chosen for their ability to provide modular, professional grade stainless steel tops with no joints at the sink which will make them very easy to clean and maintain.

Leading stainless steel specialist, GEC Anderson limited, have released details of an exciting new ‘wet zone’ concept. Available now, the new wet zone option enables specifiers to include a pressed recess anywhere within the stainless steel worktop area. Typically, the recess would be formed around sink bowl(s) but it can also be used to create lowered areas for other applications. For example, to locate chopping boards or to act as a general catchment area. The pressed recess detail is 3mm deep and can be formed in any size and position. It has a minimum radius of 10mm.

New GEC Anderson stainless steel worktops lift the shared kitchen environment within the college accommodation. The practical, durable yet aesthetically pleasing worktops feature integral upstands and wet zones around sinks for ultimate functionality combined with an uncluttered appearance.

The fully shrouded stainless steel wash basin V216 not only is very secure against tampering and vandalism. It has a distinctive and clean appearance with totally concealed pipework. Produced in brushed satin stainless steel to EN 1.4301, the highly functional basin is suited for use in any environment, from highly secure premises to general washrooms and workshops.

Domestic kitchen in Gloucestershire with cabinets, worktops, sinks and panelling in stainless steel. Cabinets have plain doors with 'D' handles and 300mm plinth detail.Continuous stainless steel sinktop with integrated double bowls of generous proportions and stainless steel base and drawer units below.

Angel Gardens is one of Manchester’s newest, purpose built, residential developments and is located in the fashionable Northern Quarter of the city.Residents of the development enjoy a ‘clubby’ feel to their living environment with a number of exclusive facilities included within the high-rise building. As well as cinema and gym areas, the roof terrace on the 9th floor boasts not only a barbegue / bar / entertaining / dining area but also a football pitch. Included in the roof-top oasis is an outdoor kitchen, supplied and installed by GEC Anderson. Comprising of stainless steel base cabinets, a continuous stainless steel worktop with integral sink and back upstand, the kitchen is used for functions and generally to cater for requirements of visitors to this level of the building.

Stainless steel worktops with integrated back and side upstands (edge 10) were specified in this smart residential apartment in the City of London.The hob run and sink run oppose one another in a galley arrangement. The front edges are plain (edge 7) and the sinks include a ‘wet zone’ provided by the fully integrated sink and a half with drainer.

Specialist lighting design company PSL, were looking for something a little different for their trendy new Bermondsey showroom. Designers, James Plumb obliged with a beautifully crafted and truly unique design that involved much concrete and some special stainless steel kitchen units from GEC Anderson.Drawer cabinets, base cabinets and appliance doors were supplied and installed by GEC Anderson, following the development of the detailed designs.

GEC Anderson stainless steel worktops were included in the revamped Café area within the prestigious RIBA Building on Portland Place, in London. The refurbishment works were carried out by Beck Interiors.The small café space is adjacent to the main member’s restaurant and provides small snacks and pastries as well as drinks and refreshments. The L-shaped stainless steel counter / sinktop was produced in one piece, providing not only an aesthetic advantage but also practicality, durability and hygiene.

Stainless steel worktops, by GEC Anderson, were deployed in the refurbishment of the mess room at Roath Fire Station in Cardiff. The kitchen units were supplied by Steelplan Kitchens.The continuous, high quality, stainless steel worktops provide a highly professional look and feel to the busy area within this important emergency facility. The requirements of hygiene, durability and safety are met by the worksuraces that feature integrated sink bowls as well as upstands to walls.

Multiple teapoint sinktops and cafe servery counters as well as cabinets and panelling were supplied to the UK Headquarters of Sony Computer Entertainment.Integral upstands were specified to all wall junctions for easy of cleaning and to ensure good levels of hygiene and durability. All sink bowls are seamlessly integrated.