Paxton10 Door Controllers are the building blocks of the Paxton10 system. Each one provides control of a single door and a port to allow support up to three Paxton10 connectors for additional functionality. A single Paxton10 system can include up to 1000 door controllers.

The Paxton10 Door Controller is a network device that communicates over TCP/IP and can be integrated into an existing network infrastructure.

Features and benefits:

Paxton10 Door Controllers are the building blocks of the Paxton10 system.
Each one provides control of a single door and a port to allow support up to three Paxton10 connectors for additional functionality.
A single Paxton10 system can include up to 1000 door controllers.
This controller is equipped with 4 inputs, tamper, 230v fail, door contact and RTE.
An intruder alarm can be integrated using the Paxton10 alarm connector (010-203).
Power over Ethernet (PoE) and PCB only (with or without plastic enclosure) options also available.

Power consumption:

While battery charging - Idle - 97 mA/5.08 W.
While battery charging - Max - 108 mA/5.6 W.
While battery full - Idle - 48 mA/2.53 W.
While battery full - Max - 105 mA/5.5 W.
Backup battery - 12 V DC, 7 Ah (Optional).
Relay rating - 30 V DC/ 2A.
RS485 connector output - 24 V DC, 750 mA max (Paxton connectors only).
RS485 reader output - 12 V DC, 1 A max (Paxton readers only).
Controller input voltage - 12 - 24 V DC (suppression at 28 V).
PoE Power Supply - INPUT: 36-57 V DC, 25.5 W (IEEE 802.3at Type 2) OUTPUT: 12.8 V DC, 1.8 A.
4A Power Supply - INPUT: 100-240 V AC, 50/60 Hz, 1.2 A; OUTPUT: 13.8 V DC, 2 A.