To Specify a full Intumescent Fire Protection Coating System C1-C4 (Primer + Intumescent + Topcoat) click on the link below and add to your Chorus Specification:

Intumescent Fire Protection Coating Systems (C1–C4) - C1–C4 Corrosivity & Fire Protection | Hempel A/S | NBS Source (thenbs.com)

To Specify a full Anti-Corrosion System C1-C5 (No Intumescent Fire Protection) (Primer + Topcoat) click on the link below and add to your Chorus Specification :

Anti-Corrosion Protective Coating System (C1–C5) - For Corrosive Environments | Hempel A/S | NBS Source (thenbs.com)

For further advice on Specifications please contact Ian Morton at iam@hempel.com

Hempadur 15553

A two-component epoxy paint. It cures to a flexible, well adhering coating with good abrasion and impact resistance.

Features and benefits:

Cures to a strong and highly corrosion-resistant coating.
Well suited as a (blast) primer in epoxy systems.
Approved as a low flame spread material when used as part of a predefined paint system.
Maximum, dry exposure only: 140°C/284°F
The greyish yellow 21780 and the grey 11320 shades contains zinc phosphate.
Hempadur 15553 is recommended as a primer for systems on hot dipped galvanized steel, aluminium, mild steel and stainless steel surfaces in moderately to severely corrosive environments.

Certificates/Approvals:

EC-type examined as a low flame spread material when used as part of a predefined paint system. Please refer to “Declaration of Conformity” on hempel.com for further details. Complies with the European Fire Standard EN 13501-1, fire reaction class: B-s1, d0.

Product compatibility:

Previous coat: None.
Subsequent coat: According to Hempel’s Specification. Recommended products are Hempadur, Hempathane, Hempatex.

Application method:

Airless spray.
Brush.

Drying time:

Determined for dry film thickness 50 µm (2.0 mils) at standard conditions. Indicative values at 20ºC; Touch dry: 18 minutes, Hard dry: 90 minutes.