An aesthetically-pleasing and effective daylighting solution. Fixed or opening flat glass rooflight with secondary blinds below the glass.

Features and benefits:

Fully thermally broken aluminium frame prevents cold bridging and reduces condensation.
Excellent thermal performance, with total system U-values as low as 0.6 W/m²K achievable.
Quick and easy to install on-site.
Compatible with both flat and pitched roofs.
White blind fabric with a white frame as standard.
Various colour blind fabrics available in white frame.
Blind frame can be ordered already connected to the rooflight or loose for install below the rooflight in the lightwell.
Blinds are classed as black out.
Building Regulations (E&W) Approved Document L compliant design to achieve low U-value targets.
Marine grade powder coat as standard
Silicone jointed glazing for a flush outer surface.
Ventilation option for natural ventilation in accordance with Building Regulation (E&W) Approved Document F, available with a glazed in vent.
Designed to be installed to a weathered builders kerb, minimum 5° pitch.
Non-Fragile to Centre for Window and Cladding Technology (CWCT) Class 1 and 2 to TN66/67 and TN92.
Double or triple glazed integrated glazing units (IGUs) can be contained within a single frame to cater for a wide range of sizes.
Heat soak testing (HST) of all toughened glass to help reduce defect failures.
All laminated glass with polished edges to help negate defect failures.
All glass features Low Emissivity (low e) coating for enhanced thermal performance.
More daylight leads to enhanced well-being.
15-year warranty (blind unit covered by three-year warranty).
Fully bespoke sizes to suit any application.
Sleek, 24 V Wi-Fi transformer wall switch.

Designed to standard loadings of 640 N/m² (snow) and 750 N/m² (wind) and in accordance with the following Standards:

BS 6375-1 2015+A1 2016: Weather tightness.
BS EN 1026: Air permeability.
BS EN 1027: Water tightness test.
BS EN 12211: Wind resistance test.
BS 1474: Aluminium Extrusions.
EN 12020-1:2001: Aluminium Extrusions.
BS EN ISO 16396-2:2017: Polyamide Thermal Break.
BS EN 12206-1:2004: Powder Coating.
EN ISO 10456: 2008 and EN 12664: 2001: Building materials and products. Hygrothermal properties.
BS EN 1279: Insulated Glass Units (IGU).
EN 14179: Heat Soak Testing Toughened Glass.
ISO 11600-FandG-25LM: Silicone Sealants.