NBS Source
I'm a manufacturer

Compare variants

Beplas Elite FRP Hygienic Fibreglass Wall Cladding
Beplas Elite FRP Hygienic Fibreglass Wall Cladding

Last verified by manufacturer over a year ago

Be-Plas Hygienic Walls & Ceilings Ltd

Beplas Elite FRP - Fire Rated

Last verified by manufacturer over a year ago

Be-Plas Hygienic Walls & Ceilings Ltd

Beplas Elite FRP - Standard

Summary
Hygienic fibreglass reinforced wall cladding.
Hygienic fibreglass reinforced wall cladding.
Application

Panels are designed for interior wall finishes where a high impact, hygienic, easy to clean surface is required. Such as:


  • Prisons
  • Hospitals
  • Schools and universities
  • Coldrooms
  • Modular builds
  • Food and beverage production
  • Laboratories

Panels are designed for interior wall finishes where a high impact, hygienic, easy to clean surface is required. Such as:


  • Prisons
  • Hospitals
  • Schools and universities
  • Coldrooms
  • Modular builds
  • Food and beverage production
  • Laboratories
Description

Fibreglass with polyester resin gives distinctive properties when it comes to strength to weight ratio, it will not shatter and provides high chemical resistance. Offers an alternative to traditional wall protection products with added benefits.


The sheets can be installed using traditional PVC extrusions or Beplas’ distinctive cold weld. They can be laminated to a variety of substrates for modular installation or cut into ceiling tiles. Elite FRP meets or exceeds UK, EU and Global hygiene, fire and building regulations.


Features and benefits:

  • Strong, hygienic and easy to clean.
  • Embossed and smooth surface finishes are available.
  • Provides an economical installation for walls and ceilings.
  • Does not support mould, mildew or bacterial growth.
  • Will not rust or corrode.
  • Cleans with regular detergents and water.
  • High strength to weight ratio.
  • Tough surface that resists shattering, scratches and abrasion.


Fibreglass with polyester resin gives distinctive properties when it comes to strength to weight ratio, it will not shatter and provides high chemical resistance. Offers an alternative to traditional wall protection products with added benefits.


The sheets can be installed using traditional PVC extrusions or Beplas’ distinctive cold weld. They can be laminated to a variety of substrates for modular installation or cut into ceiling tiles. Elite FRP meets or exceeds UK, EU and Global hygiene, fire and building regulations.


Features and benefits:

  • Strong, hygienic and easy to clean.
  • Embossed and smooth surface finishes are available.
  • Provides an economical installation for walls and ceilings.
  • Does not support mould, mildew or bacterial growth.
  • Will not rust or corrode.
  • Cleans with regular detergents and water.
  • High strength to weight ratio.
  • Tough surface that resists shattering, scratches and abrasion.


Digital objects
Color
White
White
Finish
Embossed, Smooth
Embossed, Smooth
Material
Fiber-glass, Polyester, Plastic
Fiber-glass, Polyester, Plastic
Shape
Square, Rectangle
Square, Rectangle
Length
595 mm, 1195 mm, 2400 mm, 3000 mm, Bespoke
595 mm, 1195 mm, 2400 mm, 3000 mm, Bespoke
Width
595 mm, 1200 mm, Bespoke
595 mm, 1200 mm, Bespoke
Height
Bespoke
Bespoke

Specification

Material
Fibreglass reinforced plastic.
Fibreglass reinforced plastic.
Fire performance
To BS 476-7, class 1 and BS 476-6, class 0.
To BS 476-7, class 3.
Thickness
2.3 mm.
2.3 mm.
Sheet size
595 x 595 mm., 1195 x 595 mm., 1200 x 2400 mm., 1200 x 3000 mm.
595 x 595 mm., 1195 x 595 mm., 1200 x 2400 mm., 1200 x 3000 mm.
Finish
Embossed., Smooth.
Embossed., Smooth.
Colour
White.
White.

Additional properties

OperationalTemperatureRange
-40°C to +65°C.
-40°C to +65°C.
Flexural strength
10 000 PSI.
17 000 PSI.
Tensile strength (minimum)
7000 PSI.
8000 PSI.
Barcol hardness
35.
30.
Coefficient of linear expansion (to ASTM D-696)
2.22 x 10^-5 in/inï°F.
2.22 x 10^-5 in/inï°F.
Water absorption
0.72%/72 hrs at 25°C.
0.17%/72 hrs at 21°C.
Abrasion resistance
0.391% maximum weight loss.
1.6138% maximum weight loss.
Specific gravity
1.5743.
-
Fixing
Be-plas adhesive., Be-plas high impact thermoplastic drive rivets., GPPA600., Multibead.
Be-plas adhesive., Be-plas high impact thermoplastic drive rivets., GPPA600., Multibead.
Accessories
None., Abutments., Be-plas FDA approved silicone sealant (Ref. PSNW600).
None., Abutments., Be-plas FDA approved silicone sealant (Ref. PSNW600).
Corner detail
Internal IA252.4 - High impact PVC angles, 2440 x 25 x 25 mm., Internal IA253.0 - High impact PVC angles, 3050 x 25 x 25 mm., Internal IA382.4 - High impact PVC angles, 2440 x 38 x 38 mm., Internal IA383.0 - High impact PVC angles, 3050 x 38 x 38 mm., Internal IAL502.4 - High impact PVC angles, 2440 x 50 x 50 mm., Internal IAL503.0 - High impact PVC angles, 3050 x 50 x 50 mm., Internal IC242.4 - High impact PVC inside corners, 2440 mm., Internal IC243.0 - High impact PVC inside corners, 3050 mm., External OA242.4 - High impact PVC angles, 2440 x 25 x 25 mm., External OA243.0 - High impact PVC angles, 3050 x 25 x 25 mm., External OA382.4 - High impact PVC angles, 2440 x 38 x 38 mm., External OA383.0 - High impact PVC angles, 3050 x 38 x 38 mm., External OAL502.4 - High impact PVC angles, 2440 x 50 x 50 mm., External OAL503.0 - High impact PVC angles, 3050 x 50 x 50 mm., Not required.
Internal IA252.4 - High impact PVC angles, 2440 x 25 x 25 mm., Internal IA253.0 - High impact PVC angles, 3050 x 25 x 25 mm., Internal IA382.4 - High impact PVC angles, 2440 x 38 x 38 mm., Internal IA383.0 - High impact PVC angles, 3050 x 38 x 38 mm., Internal IAL502.4 - High impact PVC angles, 2440 x 50 x 50 mm., Internal IAL503.0 - High impact PVC angles, 3050 x 50 x 50 mm., Internal IC242.4 - High impact PVC inside corners, 2440 mm., Internal IC243.0 - High impact PVC inside corners, 3050 mm., External OA242.4 - High impact PVC angles, 2440 x 25 x 25 mm., External OA243.0 - High impact PVC angles, 3050 x 25 x 25 mm., External OA382.4 - High impact PVC angles, 2440 x 38 x 38 mm., External OA383.0 - High impact PVC angles, 3050 x 38 x 38 mm., External OAL502.4 - High impact PVC angles, 2440 x 50 x 50 mm., External OAL503.0 - High impact PVC angles, 3050 x 50 x 50 mm., Not required.
Joint
DB242.4 - High impact PVC division bars, 2440 mm., DB243.0 - High impact PVC division bars, 3050 mm., TDB2.4 (two-part flex edge) - High impact PVC division bars, 2440 x 2.5 mm., TDB3.0 (two-part flex edge) - High impact PVC division bars, 3050 x 2.5 mm., Not required.
DB242.4 - High impact PVC division bars, 2440 mm., DB243.0 - High impact PVC division bars, 3050 mm., TDB2.4 (two-part flex edge) - High impact PVC division bars, 2440 x 2.5 mm., TDB3.0 (two-part flex edge) - High impact PVC division bars, 3050 x 2.5 mm., Not required.
Edge detail
CS242.4 - High impact PVC capping sections, 2440 mm., CS243.0 - High impact PVC capping sections, 3050 mm., TCS32.4 (rigid edge) - High impact PVC capping sections, 2440 x 3.0 mm., TCS33.0 (rigid edge) - High impact PVC capping sections, 3050 x 3.0 mm., Not required.
CS242.4 - High impact PVC capping sections, 2440 mm., CS243.0 - High impact PVC capping sections, 3050 mm., TCS32.4 (rigid edge) - High impact PVC capping sections, 2440 x 3.0 mm., TCS33.0 (rigid edge) - High impact PVC capping sections, 3050 x 3.0 mm., Not required.

Sustainability data

Contains Red List materials
No
No
Country of material origin
United Kingdom
United Kingdom