Suitable for any application where fire and sound compartmentation are required. Suited to school kitchens in multi-function school halls where regulations dictate that fire resistance is necessary, but where a sound break is also essential to avoid disruption from the kitchen staff. 

Larger applications include exhibition halls where its incorporation allows sound and fire resistance at relatively lower cost than other door types, such as movable walls.

Suitable for any application where fire and sound compartmentation are required. Suited to school kitchens in multi-function school halls where regulations dictate that fire resistance is necessary, but where a sound break is also essential to avoid disruption from the kitchen staff. 

Larger applications include exhibition halls where its incorporation allows sound and fire resistance at relatively lower cost than other door types, such as movable walls.

Acoustic rated and fire resisting roller shutter tested to EN 1631-1 and classified E120 in accordance with EN 13501, EN 13241, EN 16034 and EN 15269. The product is also accredited to BS EN ISO 10140-2:2010.

Features and benefits:

• Electric operation is by a 230 V nominal, single phase or 400 V nominal, three phase Speedsafe motor. Standard controls are via low-level open/ close/ stop push button.
• A manual disconnect mechanism and haul chain is provided for use in the event of power failure and a safety brake is supplied in compliance with EN 12604.
• In fire condition, gravity failsafe closing is activated by a 24 V d.c. signal from the client's fire alarm panel which is backed up by a fusible link release.
• Shutter curtains are constructed from 100 mm high flat section continuously interlocked galvanised steel laths which are securely held in place by steel end locks. Each lath is infilled with fire resisting acoustic material. 
• The bottom rail comprises a standard lath fitted with a galvanised steel trim section.
• Vertical guides are formed from galvanised steel double rebate channels and are supplied with suitable profiles for fixing to the structure.
• The roller is constructed from seamless steel tube of adequate diameter to resist deflection and held in bearings or cups attached to the endplates.
• Endplates are zinc plated mild steel of appropriate thickness relative to door size and supplied with angles for fixing to the structure.
• A galvanised steel coil casing is supplied to maintain the fire seal at the head.
• Fireroll Acoustic E120 is supplied with most parts galvanised as standard. Where non-galvanised parts are utilised, these are finished with one coat of primer paint.
• Options include heat/ smoke detectors and audio visual warning.

Acoustic rated and fire resisting roller shutter tested to EN 1631-1 and classified E120 in accordance with EN 13501, EN 13241, EN 16034 and EN 15269. The product is also accredited to BS EN ISO 10140-2:2010.

Features and benefits:

• Electric operation is by a 230 V nominal, single phase or 400 V nominal, three phase Speedsafe motor. Standard controls are via low-level open/ close/ stop push button.
• A manual disconnect mechanism and haul chain is provided for use in the event of power failure and a safety brake is supplied in compliance with EN 12604.
• In fire condition, gravity failsafe closing is activated by a 24 V d.c. signal from the client's fire alarm panel which is backed up by a fusible link release.
• Shutter curtains are constructed from 100 mm high flat section continuously interlocked galvanised steel laths which are securely held in place by steel end locks. Each lath is infilled with fire resisting acoustic material. 
• The bottom rail comprises a standard lath fitted with a galvanised steel trim section.
• Vertical guides are formed from galvanised steel double rebate channels and are supplied with suitable profiles for fixing to the structure.
• The roller is constructed from seamless steel tube of adequate diameter to resist deflection and held in bearings or cups attached to the endplates.
• Endplates are zinc plated mild steel of appropriate thickness relative to door size and supplied with angles for fixing to the structure.
• A galvanised steel coil casing is supplied to maintain the fire seal at the head.
• Fireroll Acoustic E120 is supplied with most parts galvanised as standard. Where non-galvanised parts are utilised, these are finished with one coat of primer paint.
• Options include heat/ smoke detectors and audio visual warning.