Summary
SR1, SR2 and SR3 LPCB Approved Security Rated Roller Shutters.
SR1, SR2 and SR3 LPCB Approved Security Rated Roller Shutters.
SR1, SR2 and SR3 LPCB Approved Security Rated Roller Shutters.
Application
The SecRoll is used in many varied applications where authentic security rated products are an important design consideration such as retail outlets, art galleries, studios, infrastructure and utility sites alongside government defence projects.
Performance Characteristics:
LPS1175 Issue 7 security standards—SR1, SR2 & SR3 options.
Resistance to Wind—Class 5
Options for:
Thermal Resistance – 1.1W /(m²K) at centre / 3.2W/(m²K) at quirks
Sound Reduction – 18dB Rw (BS EN ISO 10140-2:2010 – Measurements of Airborne Sound Insulation)
Key Attributes:
LPS 1175 Approved Security Rating.
High wind load capability.
Can provide both thermal and acoustic properties.
Bespoke manufacture to suit individual opening sizes
The SecRoll is used in many varied applications where authentic security rated products are an important design consideration such as retail outlets, art galleries, studios, infrastructure and utility sites alongside government defence projects.
Performance Characteristics:
LPS1175 Issue 7 security standards—SR1, SR2 & SR3 options.
Resistance to Wind—Class 5
Options for:
Thermal Resistance – 1.1W /(m²K) at centre / 3.2W/(m²K) at quirks
Sound Reduction – 18dB Rw (BS EN ISO 10140-2:2010 – Measurements of Airborne Sound Insulation)
Key Attributes:
LPS 1175 Approved Security Rating.
High wind load capability.
Can provide both thermal and acoustic properties.
Bespoke manufacture to suit individual opening sizes
The SecRoll is used in many varied applications where authentic security rated products are an important design consideration such as retail outlets, art galleries, studios, infrastructure and utility sites alongside government defence projects.
Performance Characteristics:
LPS1175 Issue 7 security standards—SR1, SR2 & SR3 options.
Resistance to Wind—Class 5
Options for:
Thermal Resistance – 1.1W /(m²K) at centre / 3.2W/(m²K) at quirks
Sound Reduction – 18dB Rw (BS EN ISO 10140-2:2010 – Measurements of Airborne Sound Insulation)
Key Attributes:
LPS 1175 Approved Security Rating.
High wind load capability.
Can provide both thermal and acoustic properties.
Bespoke manufacture to suit individual opening sizes
Description
Summary
Bolton Gate offer a complete range of Security Rated options from SR1 through to SR5 rating.
The latest addition to our portfolio, are the SecRoll Security Roller Shutters offering A1, B3 & C5 security classifications equivalent to SR1, SR2 & SR3 respectively.
Providing a choice of ratings, these bespoke high security rolling shutters manufactured here in the UK are designed to provide flexibility for our Clients with a wide range of opening sizes and specification options including thermal and acoustic capabilities.
We are proud to confirm that our security shutters are registered in the BRE Global ‘Red Book Live’ confirming our products have been rigorously tested, assessed and approved by LPCB (Loss Prevention Certification Board) and that also the same high standard and quality production is maintained through the process of regular audits.
C5 Rated SecRoll SR3
Operation
Tubular Motor
· To suit 230-volt nominal, 1 phase supply.
· External safety brake.
· Low level keyswitch
Direct Drive Motor
· To suit 400-volt nominal, 3 phase supply
· Integrated safety brake.
· Open, close, stop push buttons within low level control panel.
Arrangement
Internally face fixed to brick, block, concrete or steel (i.e. rigid structures).
Locking
A pair of side guide mounted pin locks are provided.
Over 3500mm clear width, a centrally mounted ground lock (complete with padlock) is also provided (2no if >7000mm).
Size Parameters
Minimum 1m wide x 1m high
Maximum 10m wide x 10m high (Direct drive motor)
7m wide x 4m high (Tube motor)
Weight
Varies with opening size dependent on lath/barrel/casing requirements but approximately 45kgs/m².
B3 Rated SecRoll SR2
Operation
Tubular Motor
· To suit 230-volt nominal, 1 phase supply.
· External safety brake.
· Low level keyswitch
Direct Drive Motor
· To suit 400-volt nominal, 3 phase supply
· Integrated safety brake.
· Open, close, stop push buttons within low level control panel
Arrangement
Internally face fixed to timber, brick, block, concrete or steel (i.e. flexible and rigid structures).
Locking
A pair of side guide mounted pin locks are provided.
Over 5000mm clear width, a centrally mounted ground lock (complete with padlock) is also provided.
Size Parameters
Minimum 1m wide x 1m high
Maximum 7m wide x 7m high (Direct drive motor)
7m wide x 4m high (Tube motor)
Weight
Varies with opening size dependent on lath/barrel/casing requirements but approximately 45kgs/m².
C1 Rated SecRoll SR1
Operation
Tubular Motor
· To suit 230-volt nominal, 1 phase supply.
· External safety brake.
· Low level keyswitch
Direct Drive Motor
· To suit 400-volt nominal, 3 phase supply
· Integrated safety brake.
· Open, close, stop push buttons within low level control panel.
Arrangement
Internally face fixed to timber, brick, block, concrete or steel (i.e. flexible and rigid structures).
Locking
A pair of side guide mounted pin locks are provided.
Size Parameters
Minimum 1m wide x 1m high
Maximum 7m wide x 7m high (Direct drive motor)
7m wide x 4m high (Tube motor)
Weight
Varies with opening size dependent on lath/barrel/casing requirements but approximately 45kgs/m².
Summary
Bolton Gate offer a complete range of Security Rated options from SR1 through to SR5 rating.
The latest addition to our portfolio, are the SecRoll Security Roller Shutters offering A1, B3 & C5 security classifications equivalent to SR1, SR2 & SR3 respectively.
Providing a choice of ratings, these bespoke high security rolling shutters manufactured here in the UK are designed to provide flexibility for our Clients with a wide range of opening sizes and specification options including thermal and acoustic capabilities.
We are proud to confirm that our security shutters are registered in the BRE Global ‘Red Book Live’ confirming our products have been rigorously tested, assessed and approved by LPCB (Loss Prevention Certification Board) and that also the same high standard and quality production is maintained through the process of regular audits.
C5 Rated SecRoll SR3
Operation
Tubular Motor
· To suit 230-volt nominal, 1 phase supply.
· External safety brake.
· Low level keyswitch
Direct Drive Motor
· To suit 400-volt nominal, 3 phase supply
· Integrated safety brake.
· Open, close, stop push buttons within low level control panel.
Arrangement
Internally face fixed to brick, block, concrete or steel (i.e. rigid structures).
Locking
A pair of side guide mounted pin locks are provided.
Over 3500mm clear width, a centrally mounted ground lock (complete with padlock) is also provided (2no if >7000mm).
Size Parameters
Minimum 1m wide x 1m high
Maximum 10m wide x 10m high (Direct drive motor)
7m wide x 4m high (Tube motor)
Weight
Varies with opening size dependent on lath/barrel/casing requirements but approximately 45kgs/m².
B3 Rated SecRoll SR2
Operation
Tubular Motor
· To suit 230-volt nominal, 1 phase supply.
· External safety brake.
· Low level keyswitch
Direct Drive Motor
· To suit 400-volt nominal, 3 phase supply
· Integrated safety brake.
· Open, close, stop push buttons within low level control panel
Arrangement
Internally face fixed to timber, brick, block, concrete or steel (i.e. flexible and rigid structures).
Locking
A pair of side guide mounted pin locks are provided.
Over 5000mm clear width, a centrally mounted ground lock (complete with padlock) is also provided.
Size Parameters
Minimum 1m wide x 1m high
Maximum 7m wide x 7m high (Direct drive motor)
7m wide x 4m high (Tube motor)
Weight
Varies with opening size dependent on lath/barrel/casing requirements but approximately 45kgs/m².
C1 Rated SecRoll SR1
Operation
Tubular Motor
· To suit 230-volt nominal, 1 phase supply.
· External safety brake.
· Low level keyswitch
Direct Drive Motor
· To suit 400-volt nominal, 3 phase supply
· Integrated safety brake.
· Open, close, stop push buttons within low level control panel.
Arrangement
Internally face fixed to timber, brick, block, concrete or steel (i.e. flexible and rigid structures).
Locking
A pair of side guide mounted pin locks are provided.
Size Parameters
Minimum 1m wide x 1m high
Maximum 7m wide x 7m high (Direct drive motor)
7m wide x 4m high (Tube motor)
Weight
Varies with opening size dependent on lath/barrel/casing requirements but approximately 45kgs/m².
Summary
Bolton Gate offer a complete range of Security Rated options from SR1 through to SR5 rating.
The latest addition to our portfolio, are the SecRoll Security Roller Shutters offering A1, B3 & C5 security classifications equivalent to SR1, SR2 & SR3 respectively.
Providing a choice of ratings, these bespoke high security rolling shutters manufactured here in the UK are designed to provide flexibility for our Clients with a wide range of opening sizes and specification options including thermal and acoustic capabilities.
We are proud to confirm that our security shutters are registered in the BRE Global ‘Red Book Live’ confirming our products have been rigorously tested, assessed and approved by LPCB (Loss Prevention Certification Board) and that also the same high standard and quality production is maintained through the process of regular audits.
C5 Rated SecRoll SR3
Operation
Tubular Motor
· To suit 230-volt nominal, 1 phase supply.
· External safety brake.
· Low level keyswitch
Direct Drive Motor
· To suit 400-volt nominal, 3 phase supply
· Integrated safety brake.
· Open, close, stop push buttons within low level control panel.
Arrangement
Internally face fixed to brick, block, concrete or steel (i.e. rigid structures).
Locking
A pair of side guide mounted pin locks are provided.
Over 3500mm clear width, a centrally mounted ground lock (complete with padlock) is also provided (2no if >7000mm).
Size Parameters
Minimum 1m wide x 1m high
Maximum 10m wide x 10m high (Direct drive motor)
7m wide x 4m high (Tube motor)
Weight
Varies with opening size dependent on lath/barrel/casing requirements but approximately 45kgs/m².
B3 Rated SecRoll SR2
Operation
Tubular Motor
· To suit 230-volt nominal, 1 phase supply.
· External safety brake.
· Low level keyswitch
Direct Drive Motor
· To suit 400-volt nominal, 3 phase supply
· Integrated safety brake.
· Open, close, stop push buttons within low level control panel
Arrangement
Internally face fixed to timber, brick, block, concrete or steel (i.e. flexible and rigid structures).
Locking
A pair of side guide mounted pin locks are provided.
Over 5000mm clear width, a centrally mounted ground lock (complete with padlock) is also provided.
Size Parameters
Minimum 1m wide x 1m high
Maximum 7m wide x 7m high (Direct drive motor)
7m wide x 4m high (Tube motor)
Weight
Varies with opening size dependent on lath/barrel/casing requirements but approximately 45kgs/m².
C1 Rated SecRoll SR1
Operation
Tubular Motor
· To suit 230-volt nominal, 1 phase supply.
· External safety brake.
· Low level keyswitch
Direct Drive Motor
· To suit 400-volt nominal, 3 phase supply
· Integrated safety brake.
· Open, close, stop push buttons within low level control panel.
Arrangement
Internally face fixed to timber, brick, block, concrete or steel (i.e. flexible and rigid structures).
Locking
A pair of side guide mounted pin locks are provided.
Size Parameters
Minimum 1m wide x 1m high
Maximum 7m wide x 7m high (Direct drive motor)
7m wide x 4m high (Tube motor)
Weight
Varies with opening size dependent on lath/barrel/casing requirements but approximately 45kgs/m².
Product certifications
Color
Grey, Beige, Black, Blue, Brown, Cream, Green, Ivory, Orange, Pink, Purple, Red, Silver, White, Yellow, Other
Grey, Beige, Black, Blue, Brown, Cream, Green, Ivory, Orange, Pink, Purple, Red, Silver, White, Yellow, Other
Grey, Beige, Black, Blue, Brown, Cream, Green, Ivory, Orange, Pink, Purple, Red, Silver, White, Yellow, Other
Finish
Galvanized, Powder-coated, Plastisol
Galvanized, Powder-coated, Plastisol
Galvanized, Powder-coated, Plastisol
Material
Steel
Steel
Steel
Shape
Rectangle, Square
Rectangle, Square
Rectangle, Square
Length
Bespoke
Bespoke
Bespoke
Width
1000 mm, 7000 mm, 10000 mm, Bespoke
1000 mm, 7000 mm, 10000 mm, Bespoke
1000 mm, 7000 mm, 10000 mm, Bespoke
Height
1000 mm, 7000 mm, 10000 mm, Bespoke
1000 mm, 7000 mm, 10000 mm, Bespoke
1000 mm, 7000 mm, 10000 mm, Bespoke
Warranty description
One year
One year
One year
Specification
Format
External.
External.
External.
Arrangement
Internally face fixed.
Internally face fixed.
Internally face fixed.
Performance
-
-
-
Resistance to wind load
Class 5.
Class 5.
Class 5.
Acoustic performance
To BS EN ISO 10140-2, 18 dB Rw.
To BS EN ISO 10140-2, 18 dB Rw.
To BS EN ISO 10140-2, 18 dB Rw.
Thermal resistance
1.1 W/(m²K) at centre.
3.2 W/(m²K) at quirks.
1.1 W/(m²K) at centre.
3.2 W/(m²K) at quirks.
1.1 W/(m²K) at centre.
3.2 W/(m²K) at quirks.
Shutter curtain
-
-
-
Lath material
Galvanized steel.
Galvanized steel.
Galvanized steel.
Profile
Flat.
Flat.
Flat.
Finish and colour
Galvanized., Polyester powder-coated., Plastisol.
Galvanized., Polyester powder-coated., Plastisol.
Galvanized., Polyester powder-coated., Plastisol.
Frame and guides
-
-
-
Material
Steel.
Steel.
Steel.
Finish
Galvanized., Polyester powder-coated., Plastisol.
Galvanized., Polyester powder-coated., Plastisol.
Galvanized., Polyester powder-coated., Plastisol.
Colour
-
-
-
Film thickness (minimum)
Manufacturer's standard.
Manufacturer's standard.
Manufacturer's standard.
Operation
-
-
-
Mode
Automatic.
Automatic.
Automatic.
Control
Tubular motor., Direct drive motor.
Tubular motor., Direct drive motor.
Tubular motor., Direct drive motor.
Hardware
Locks.
Locks.
Locks.
Additional properties
Security
LPS 1175 issue 7, SR3.
LPS 1175 issue 7, SR2.
LPS 1175 issue 7, SR1.
Sustainability data
Contains Red List materials
No
No
No
Country of material origin
United Kingdom
United Kingdom
United Kingdom
Country of product manufacture
United Kingdom
United Kingdom
United Kingdom
Material
Steel
Steel
Steel
Manufacturing plant location
Bolton BL1 2SP, UK
Bolton BL1 2SP, UK
Bolton BL1 2SP, UK
Recyclability
95%
95%
95%
Recycled content
0 %
0 %
0 %
Expected Life
25 year
25 year
25 year