NBS Source
I'm a manufacturer

Compare variants

Protec Warm Roof Systems - Cold-applied liquid membrane
Protec Warm Roof Systems - Cold-applied liquid membrane
Protec Warm Roof Systems - Cold-applied liquid membrane

Last verified by manufacturer over a year ago

Polyroof Products Ltd

Last verified by manufacturer over a year ago

Polyroof Products Ltd

Last verified by manufacturer over a year ago

Polyroof Products Ltd
Summary
A range of warm roof systems with a cold-applied liquid membrane finish.
-
-
Application

Suitable for flat and pitched roofs, balconies, terraces and walkway applications.

-
-
Description

Protec is a highly versatile, fast curing, fully reinforced cold liquid applied membrane system, suitable for a wide range of roofing and waterproofing applications.


The Protec RapidCure technology utilises catalyst, accelerators and inhibitors allowing full control over cure times across a wide range of temperatures all year round. The seamless Protec membrane features the optimum combination of flexibility and toughness, making it suitable for roofs, terraces and walkways of all sizes including situations requiring regular foot traffic. Where new insulation is required, the Protec Warm Roof System can be specified as a flat or tapered scheme to provide a highly efficient solution and meet the very highest thermal performance requirements. Protec offers lasting weatherproof protection for at least 25 years (BBA Cert. No. 09/4676) and is supported by Polyroof’s Approved System Guarantees for up to 25 years.


Features and benefits:

  • Flexible and tough membrane - A flexible hybrid polymer waterproofing system with flexibility and robustness. 
  • RapidCure Technology - Fast application with cure times as low as 30 minutes. Cured state is tough, seamless and impermeable.
  • Seamless waterproof membrane - Applied as a liquid, Protec forms a seamless waterproof membrane with no joints, no welds and no weak points. 
  • Cold applied installation with zero risks from hot works - Unlike many traditional roofing materials that require open flame hot works to install, Protec is fully cold applied meaning there are no risks of accidental fire during installation. 
  • Fire performance - Classified as BROOF(t4), the top rating achievable for a flat roof system and designating Protec as unrestricted under the national requirements. 
  • Protec is BBA approved (Cert No. 09/4676) with a certified lifespan of at least 25 years. Protec is also FM Approved and ETA Certified (ETA-20/0914) with CE marking. 
  • Suitable for use with zero falls in accordance with BBA certificate BBA (09/4676).
  • Manufactured in accordance with BS EN ISO 9001:2015 and BS EN 14001:2015.


Please consult Polyroof Products Ltd for further specification advice.

-
-
Product certifications
-
-
Color
Grey, Other
-
-
Finish
Smooth
-
-
Material
Polymer, Polyisocyanurate (PIR), Expanded polystyrene (EPS), Stonewool
-
-
Shape
Other
-
-
Length
Bespoke
-
-
Width
Bespoke
-
-
Height
Bespoke
-
-
WarrantyDescription
20 year
-
-

Specification

Air and vapour control layer
Polyroof SA Vapour Control Layer.
-
-
Insulation
-
-
-
Type
Polyroof Tissue Therm Insulation.
-
-
Fixing
Adhesively Bonded / Mechanically Fixed. Dependant upon Wind Loading Calculation Data (BS EN 1991 – 1-4:2005 (Eurocode 1)).
-
-
Overlay
-
-
-
Type
Not required for this system.
-
-
Carrier membrane
-
-
-
Type
Polyroof SA Carrier Layer.
-
-
Liquid-applied waterproofing
-
-
-
Type
Cold Liquid Applied Protec Resin with catalyst (two coats).
-
-
Reinforcement
Polymat 450 (first coat).
-
-
Surface treatment
None., Paving (with pedestals)., Decking (with pedestals)., Polyroof Anti-slip.
-
-
System accessories
Polyroof pre-formed GRP Trims - drip/ upstand., Polyroof pre-formed GRP Trims - fillet., Polyroof pre-formed GRP Trims - termination bar, Polyroof pre-formed GRP Trims - simulated metal finish - standing seam., Polyroof pre-formed GRP Trims - simulated metal finish - lead roll., Polyroof pre-formed Internal Outlets., Polyroof pre-formed Through Wall Outlets., Polyroof Insulation Adhesive., Polyroof Fall Arrest Systems., Polyroof SA Lightning Conductor Clips., Polyroof Fixing Plates (for PV cells / Balustrade systems)., Polyroof PR Rooflights., Fixings - EJOT TKR, associated stress plates and plastic tube washers., Fixings - EJOT TKE, associated stress plates and plastic tube washers., Fixings - EJOT FBS, associated stress plates and plastic tube washers., Fixings - EJOT FPS, associated stress plates and plastic tube washers.
-
-
Execution
Installation by Polyroof approved contractors.
-
-

Additional properties

Colour
Light Grey.
, Chromite Grey., Quartz Grey., RAL specials., BS specials.
-
-
Fire performance
Achieves Broof T4 classification in accordance with BBA certificate (09/4676).
-
-
Cure time
30–60 minutes.
-
-
Application temperature
1–30°C.
-
-
Substrate
Concrete., Structural Metal Roof Deck., Timber.
-
-
Fall
Flat., Pitched., Flat and pitched.
-
-
Certification
BBA Certificate Number 09/4676.
-
-
Slip resistance
Tested to BS 7976-2: 2002.
-
-
Resistance to water penetration
Suitable for use with zero falls in accordance with BBA certificate (09/4676).
-
-

Sustainability data

Country of material origin
United Kingdom
-
-
Country of product manufacture
United Kingdom
-
-