For use in commercial buildings and automated interior doors.

For use in commercial buildings and automated interior doors.

For use in commercial buildings and automated interior doors.

Mortice lock, self-locking, motorised opening, panic. Operation from outside (knob/pull handle) via identification systems (e.g. badge) or via the cylinder. In daytime release mode (self-locking inactive), door can be opened very quickly (< 0.4 sec). This method of operation is particularly suitable for heavily used doors needing controlled access.

Note: The cylinder screw is not centred in the forend. To determine the cylinder lengths: centre of forend = centre of lock cylinder. Do not use asymmetric cylinders with "L-cam". Do not use a reduction sleeve for the Follower/square spindle. No external, mechanical bolt switch contact is recommended. ​Scope of supply: without connection cable or accessories.​

Features and benefits:

• ​​​Four-part clamp follower, square 9 mm, panic E.
• ​​Hardened main bolt; 20 mm throw.
• ​​​Dampened, reversible DIN L+R comfort latch with latch blocking.
• ​​Smooth-running latch withdrawal for retracting the latch.
• ​​​Self-locking with mechanical sequence control (electronically monitored to prevent unwanted throwing of the deadbolt) and tampering protection (Mode 2+4).
• ​​Four operating modes and acoustic signals can be set via the DIP switch (Mode 1 = factory setting).
• ​​​Recommended connection cable: 6-pin; 10/20 m; 0.5 mm2.
• ​​​Inputs: opening and/or daytime release function earthed (GND).
• ​​​Output: potential free; max. 125 V a.c./300 mA or 30 V d.c./1 A.
• ​​​Feedback contact: Mode 1 ‘locked’; Mode 2+3 ‘door closed + locked’; Mode 4 for door drive ‘open’ as long as latch + bolt are retracted by the motor.
• ​​Power: 24 V d.c./1.5 A (36 W); 12 V d.c./3.9 A (47 W) possible.
• Suitable for rotary knob cylinders​.
• Follower turning angle 35°.

Mortice lock, self-locking, motorised opening, panic. Operation from outside (knob/pull handle) via identification systems (e.g. badge) or via the cylinder. In daytime release mode (self-locking inactive), door can be opened very quickly (< 0.4 sec). This method of operation is particularly suitable for heavily used doors needing controlled access.

Note: The cylinder screw is not centred in the forend. To determine the cylinder lengths: centre of forend = centre of lock cylinder. Do not use asymmetric cylinders with "L-cam". Do not use a reduction sleeve for the Follower/square spindle. No external, mechanical bolt switch contact is recommended. ​Scope of supply: without connection cable or accessories.​

Features and benefits:

• ​​​Four-part clamp follower, square 9 mm, panic E.
• ​​Hardened main bolt; 20 mm throw.
• ​​​Dampened, reversible DIN L+R comfort latch with latch blocking.
• ​​Smooth-running latch withdrawal for retracting the latch.
• ​​​Self-locking with mechanical sequence control (electronically monitored to prevent unwanted throwing of the deadbolt) and tampering protection (Mode 2+4).
• ​​Four operating modes and acoustic signals can be set via the DIP switch (Mode 1 = factory setting).
• ​​​Recommended connection cable: 6-pin; 10/20 m; 0.5 mm2.
• ​​​Inputs: opening and/or daytime release function earthed (GND).
• ​​​Output: potential free; max. 125 V a.c./300 mA or 30 V d.c./1 A.
• ​​​Feedback contact: Mode 1 ‘locked’; Mode 2+3 ‘door closed + locked’; Mode 4 for door drive ‘open’ as long as latch + bolt are retracted by the motor.
• ​​Power: 24 V d.c./1.5 A (36 W); 12 V d.c./3.9 A (47 W) possible.
• Suitable for rotary knob cylinders​.
• Follower turning angle 35°.

Mortice lock, self-locking, motorised opening, panic. Operation from outside (knob/pull handle) via identification systems (e.g. badge) or via the cylinder. In daytime release mode (self-locking inactive), door can be opened very quickly (< 0.4 sec). This method of operation is particularly suitable for heavily used doors needing controlled access.

Note: The cylinder screw is not centred in the forend. To determine the cylinder lengths: centre of forend = centre of lock cylinder. Do not use asymmetric cylinders with "L-cam". Do not use a reduction sleeve for the Follower/square spindle. No external, mechanical bolt switch contact is recommended. ​Scope of supply: without connection cable or accessories.​

Features and benefits:

• ​​​Four-part clamp follower, square 9 mm, panic E.
• ​​Hardened main bolt; 20 mm throw.
• ​​​Dampened, reversible DIN L+R comfort latch with latch blocking.
• ​​Smooth-running latch withdrawal for retracting the latch.
• ​​​Self-locking with mechanical sequence control (electronically monitored to prevent unwanted throwing of the deadbolt) and tampering protection (Mode 2+4).
• ​​Four operating modes and acoustic signals can be set via the DIP switch (Mode 1 = factory setting).
• ​​​Recommended connection cable: 6-pin; 10/20 m; 0.5 mm2.
• ​​​Inputs: opening and/or daytime release function earthed (GND).
• ​​​Output: potential free; max. 125 V a.c./300 mA or 30 V d.c./1 A.
• ​​​Feedback contact: Mode 1 ‘locked’; Mode 2+3 ‘door closed + locked’; Mode 4 for door drive ‘open’ as long as latch + bolt are retracted by the motor.
• ​​Power: 24 V d.c./1.5 A (36 W); 12 V d.c./3.9 A (47 W) possible.
• Suitable for rotary knob cylinders​.
• Follower turning angle 35°.