Suitable for securing two bicycles.

Suitable for securing two bicycles.

The AUTOPA Kirby Cycle Stand is based on the popular Sheffield Cycle Stand. A familiar sight throughout the UK, the design allows the frame and wheel of the bicycle to be secured by the cyclists own lock. Each stand is suitable for securing two bicycles at once.

Features and benefits:

• The Kirby is a rolled variant of the ever popular Sheffield cycle stand.
• The practical and durable nature of the AUTOPA Kirby cycle stand ensures it has been consistently recommended by cycling groups since it’s introduction in the 2000’s.
• Supplied in Grade 304 Stainless Steel
• Reflective tape can be added to maximise visibility.
• 770 x 750 mm (height x length).
• 48 mm diameter tube.
• 2 mm wall thickness (stainless).
• 300 mm below ground (ragged only).

Installation:

• Flanged versions require bolting onto established concrete of at least 300 mm³ per leg, by means of 6x M12 bolts.
• Ragged versions require setting with concrete into a hole of at least 300 x 300 x 350 mm (length x width x depth).
• Allow at least 800 mm between stands and a minimum of 450 mm from any obstruction.

The AUTOPA Kirby Cycle Stand is based on the popular Sheffield Cycle Stand. A familiar sight throughout the UK, the design allows the frame and wheel of the bicycle to be secured by the cyclists own lock. Each stand is suitable for securing two bicycles at once.

Features and benefits:

• The Kirby is a rolled variant of the ever popular Sheffield cycle stand.
• The practical and durable nature of the AUTOPA Kirby cycle stand ensures it has been consistently recommended by cycling groups since it’s introduction in the 2000’s.
• Supplied in Grade 304 Stainless Steel
• Reflective tape can be added to maximise visibility.
• 770 x 750 mm (height x length).
• 48 mm diameter tube.
• 2 mm wall thickness (stainless).
• 300 mm below ground (ragged only).

Installation:

• Flanged versions require bolting onto established concrete of at least 300 mm³ per leg, by means of 6x M12 bolts.
• Ragged versions require setting with concrete into a hole of at least 300 x 300 x 350 mm (length x width x depth).
• Allow at least 800 mm between stands and a minimum of 450 mm from any obstruction.