Suitable for high traffic areas in the education, healthcare, retail, commercial and residential sectors

The SPD150 system is designed as a high usage, non-rebated door and framing solution capable of being manufactured as single and double doors, including emergency door types and utilising low thresholds and a variety of options such as radius anti-finger trap stiles. It is a thermally broken polyamide system, capable of accepting glazing up to 48 mm thickness.

Materials:

• Extruded aluminium is generally Aluminium Alloy 6060.T6/ T66, 6063.T6/T66, 6082.T6 to BS EN 755-9 and EN 12020-2.
• Polyamide thermal barriers PA66 GF.25 and Senior Architectural Systems Polyurethane.
• The Gasketry is generally manufactured in accordance with BS ISO 3302-1.
• The fixings are generally A2 stainless steel screws.

Finishes:

SPD150 framing sections are available typically in three finishes:

• Polyester powder coating to BS EN 12206-1 part 1 painted in house. Surface finished to a minimum of 40 microns standard, or enhanced to suit project requirements, in accordance with ISO 9001, ISO 14001 and ISO 45001.
• Anodized finishes are to BS 3897 to a minimum of 25 microns (AA25), supplied in either satin or polished finish in a limited range of colours.
• Mill finish.

Construction:

SPD150 is constructed with square cut components, mechanically jointed using self tapping screws into special sheerblocks. A proprietary sealant is used on all metal joints in line with good practice