• In publicly accessible buildings in accordance with DIN 18040–1 and DIN EN 1253.
• In accessible dwellings complying with DIN 18040–2 (consult technical literature for details).
• As structural sealing in combination with tile or slab coverings for load classes A0 and A.

Flush to the floor shower element for direct tiling with integrated, horizontal, standard-compliant drain. The floor element is supplied sealed ready for installation.

The shower element fulfils all relevant standards and offers an overall installation height of 90 mm.

Features and benefits:

• The drain has been tested by TÜV Rheinland and fulfils all of the requirements of DIN EN 1253.
• Drain capacity of 0.8 L per second.
• 50 mm water trap height.
• At least 1.5% even preformed gradient.
• 100% waterproof material.
• Suitable for all tile sizes.
• Alongside the stainless steel cover included, wedi Fundo Fino designer grates can also be used.
• Assured reliability due to the drain technology integrated into the waterproof blue extruded polystyrene (XPS) core.
• Complies with all common standards and guidelines (DIN EN 1253 and EN 12056).
• A+ rating in relation to Emissions Dans L'air Interieur.
• Fundo Integro (can be shortened on-site, but the geometry of the elements must be maintained).
• Wheelchair load-bearing from minimum tile size: 50 x 50 mm.
• Glass mosaic (thickness: 3 mm) from minimum size: 20 x 20 mm.

The product can be installed on almost any surface as an individual tileable floor-level shower system. The system includes:

• A waterproof rigid foam core with a special, resistant and glass fibre reinforced cement coating.
• A defined and absolutely even surface slope.
• A flat, fully integrated, standard-compliant, horizontal drain.

The product is also compatible with wedi Fundo Fino drain covers. In this case, the polyvinyl chloride (PVC) frame has to be used.