NBS Source
I'm a manufacturer

Compare variants

Quadrant Trim
Quadrant Trim
Quadrant Trim

Verified 2 months ago

Genesis Global Systems Limited

Verified 2 months ago

Genesis Global Systems Limited

Verified 2 months ago

Genesis Global Systems Limited
Summary
Extruded aluminium quadrant trim.
-
-
Application

Designed to protect the edges of ceramic tiles or similar hard finishes fitted in wall or floor installations.


  1. Select EAQ according to tile thickness 
  2. Trowel tile adhesive over the area that forms the perimeter of the tiled covering. 
  3. Press the perimeter of the tiled covering. 
  4. Trowel additional adhesive over the perforated anchoring leg to ensure full coverage. 
  5. Solidly embed the tiles so that the tiled surface is flush with the top of the profile, the profile should not be higher than the tiled surface, but rather up to approx. 1mm lower. 
  6. Fill the joint completely with grout. 


-
-
Description

An extruded aluminium profile with a fully rounded quadrant face designed to protect the edges of ceramic tiles or similar hard finishes fitted in wall or floor installations.


In choosing aluminium as a finishing profile the suitability of its installation must be determined if chemical or mechanical stresses are anticipated. Three-way corner pieces are also available to solve the problem of mitres which are often sharp or unsightly.


-
-
Color
White, Black, Beige, Grey, Silver, Yellow
-
-
Finish
Brass, Matt, Bright, Brushed
-
-
Material
Aluminium
-
-
Length
2500 mm
-
-
Height
6 mm, 8 mm, 10 mm, 12 mm
-
-
SKU Code
EAQ060, EAQ080, EAQ100, EAQ120, EAQ150
-
-

Specification

Classification data
Material
Aluminium.
-
-
Finish
White 01., Black 16., Beige 25., Soft grey 34., Mill aluminium 80., Matt silver 81., Matt brass 83., Pewter 85., Bright brass 86., Bright silver 91., Brushed effect 94.
-
-
Cross section size
2500 x 7 x 6 mm.
-
-

Additional properties

Corners
EAC062., EAC082., EAC102., EAC122., EAC152., EIQ082., EIQ102., EIQ122.
-
-

Sustainability data

Contains Red List materials
No
-
-
Country of material origin
United Kingdom
-
-