An anti-climb steel grating for cladding, security or balustrades with a rectangular aperture 34 mm wide, available in panels up to 4 m high for covering large areas.
An anti-climb steel grating for cladding, security or balustrades with a rectangular aperture 34 mm wide, available in panels up to 4 m high for covering large areas.
An anti-climb steel grating for cladding, security or balustrades with a rectangular aperture 34 mm wide, available in panels up to 4 m high for covering large areas.
Hot-dip galvanized., Hot-dip galvanized and polyester powder coated, RAL.
Hot-dip galvanized., Hot-dip galvanized and polyester powder coated, RAL.
Hot-dip galvanized., Hot-dip galvanized and polyester powder coated, RAL.
Dimensions
As Vertical bars.
As Vertical bars.
As Vertical bars.
Side edges
-
-
-
Material
Carbon steel S235JR.
Carbon steel S235JR.
Carbon steel S235JR.
Shape
Rectangular.
Rectangular.
Rectangular.
Finish
As Top edge.
As Top edge.
As Top edge.
Dimensions
As Vertical bars.
As Vertical bars.
As Vertical bars.
Bottom edge
-
-
-
Material
Carbon steel S235JR.
Carbon steel S235JR.
Carbon steel S235JR.
Shape
Rectangular.
Rectangular.
Rectangular.
Finish
As Top edge.
As Top edge.
As Top edge.
Dimensions
As Vertical bars.
As Vertical bars.
As Vertical bars.
Horizontal rails
-
-
-
Material
Carbon steel S235JR.
Carbon steel S235JR.
Carbon steel S235JR.
Shape
Circular.
Circular.
Circular.
Finish
As Top edge.
As Top edge.
As Top edge.
Dimensions
Manufacturer's standard.
Manufacturer's standard.
Manufacturer's standard.
Vertical bars
-
-
-
Material
Carbon steel S235JR.
Carbon steel S235JR.
Carbon steel S235JR.
Shape
Rectangular.
Rectangular.
Rectangular.
Finish
As Top edge.
As Top edge.
As Top edge.
Dimensions
25 x 2 mm., 25 x 3 mm., 30 x 2 mm., 30 x 3 mm., 40 x 3 mm., 50 x 3 mm.
25 x 2 mm., 25 x 3 mm., 30 x 2 mm., 30 x 3 mm., 40 x 3 mm., 50 x 4 mm., 60 x 4 mm., 70 x 4 mm.
25 x 3 mm., 30 x 2 mm., 30 x 3 mm.
Fixings
Through holes in the framing bar., Through plates welded between the vertical flat bars., Through plates welded behind the vertical flat bars., With clamping brackets.
Through holes in the framing bar., Through plates welded between the vertical flat bars., Through plates welded behind the vertical flat bars., With clamping brackets.
Through holes in the framing bar., Through plates welded between the vertical flat bars., Through plates welded behind the vertical flat bars., With clamping brackets.
Additional properties
Panel size
-
-
-
Other requirements
Not required., Shaped to suit non-uniform openings., Rolled to a radius.
Not required., Shaped to suit non-uniform openings., Rolled to a radius.
Not required., Shaped to suit non-uniform openings., Rolled to a radius.
Orientation
Round bars set to inside of enclosed area., Round bars set to outside of enclosed area.
Round bars set to inside of enclosed area., Round bars set to outside of enclosed area.
Round bars set to inside of enclosed area., Round bars set to outside of enclosed area.