For use as cladding support for:

• Rainscreen cladding bracket with enhanced thermal performance when compared to aluminium brackets. Used to reduce the insulation thickness and meet lower U-values.
• Resistance to localised corrosion due to nature of building and/ or local environment.

Compatible with a wide range of façade types such as:

HPL

Fibre cement

Rockpanel

Timber

Zinc

Aluminium cassette

Brick slip systems

Terracotta

Stone

Can be fixed back to various substrates including:

SFS.

Concrete frame.

Brickwork.

blockwork

Timber frame.

Insulated carrier panels.

Existing buildings.

The system can incorporate insulation to upgrade the thermal performance of existing building and meet U-value targets for new build designs

High Rise applications.

Low rise applications.

Mixed use developments.

Data Centres.

Warehousing.

Industrial.

Commercial.

Designed using stainless steel for use where specification requires resistance to localised corrosion due to nature of building and/or local environment. Available in both Stainless steel 304 (A2) and 316 (A4) subject to specification requirements.

UL (Winmark, UKAS accreditation) approved facade systems, approval recognised by the NHBC.

The EVT stainless steel brackets have a superior thermal performance due to the low thermal conductivity of stainless steel. Often used to improve the overall U-value of a façade build up, which in some instances can lead to a reduction in the thickness of insulation.

EVT Stainless L-brackets have a better design resistance than the standard EVT L-brackets and can be used where projects require higher loads acting on the substructure. 

Stainless steel subframe bracket systems for rainscreen are designed in accordance with BS EN 1090-3:2008 and / or Euro code 3 – Part 1.

Typical bracket configuration uses the Fixed Point bracket at the highest position on the vertical rail to support the façade vertical dead loads. The Sliding Point bracket is typically used on all other positions of the vertical rail to absorb the project wind loading.

The brackets base has fixing slots suitable for concrete, steel and timber, it also includes slots and holes for Fixed and Sliding Point brackets.

Brackets are available with various thermal pad options to improve overall thermal performance.

The system comprises of:

• EVT II L Bracket A2.
• EVT II Thermal pads.
• EVT II L Soffit Bracket Thermal AL - 80 x 60 x 3/4mm.
• L-Profiles (3.0 m length).
• T-profiles ( 3.0 m length
• C-Profiles (3.0 m length).
• Hat Profile (3.0 m length).
• Cladding (supplied by others).