Visually enhances a space:

Can be easily incorporated into design schemes to provide illumination.
Provides the ability to change or affect the mood within a space.
Aids navigation routes and walkways.
Highlights focal points.
Creates a subtle glow.

Profiles that create practical solutions:

Provides a more secure solution to adhering LED tapes directly onto surfaces.
Helps dissipate heat, extending the Gradus Impression LED tape's life, ensuring optimum performance.
Protects the LED tape against dirt and damage.
Easier to clean & maintain.

Offers increased functionality:

Gradus LED Impression tapes are available single colours, dual-white colours, RGB or RGBW colour changing.
Control equipment also available for managing multiple areas/zones, colour changing, or dimming.

Profile Options:

ALS/TS Thin Surface - Aluminium base with Polycarbonate cover (semi-diffused) and Gradus Impression LED Lighting. For surface mounting to walls, ceilings, units, cabinets etc.
ALS/DS Deep Surface - Aluminium base with Polycarbonate cover (semi-diffused) and Gradus Impression LED Lighting. For surface mounting to walls and ceilings in highly visible locations.
ALS/OL Optic Lens - Aluminium base with Polycarbonate cover (clear) and Gradus Impression LED Lighting. For surface mounting to create a wall washing lighting effect.
ALS/B Bendable - Aluminium base with Polycarbonate cover (semi-diffused) and Gradus Impression LED Lighting. For surface mounting to walls, ceilings, or within coves. Bendable (300mm minimum bend radius).
ALS/FC Corner - Aluminium base with Polycarbonate cover (semi-diffused) and Gradus Impression LED Lighting. For surface mounting to 90° angle corners on walls and ceilings.
ALS/FB Flat Base - Aluminium base with Polycarbonate cover (semi-diffused) and Gradus Impression LED Lighting. For surface mounting to locations that are not visible.
ALS/SR Shallow Recessed - Aluminium base with Polycarbonate cover (semi-diffused) and Gradus Impression LED Lighting. For shallow recesses within walls, ceilings, units, furniture etc.
ALS/DR Deep Recessed - Aluminium base with Polycarbonate cover (semi-diffused) and Gradus Impression LED Lighting. For deeper recesses within walls, ceilings, units, furniture etc.
ALS/WO Walk Over - Aluminium base with Polycarbonate cover (semi-diffused) and Gradus Impression LED Lighting. For use in floor recesses.
ALS/FR Flush Recessed - Aluminium base with Polycarbonate cover (semi-diffused) and Gradus Impression LED Lighting. For projects where the profile is to be plastered into a wall or other surface.
DLA45 U-Section - Aluminium base with Polycarbonate cover (semi-diffused) and Gradus Impression LED Lighting. For surface mounting to locations that are not visible.

Sorry, no results were found