Sensors and detectors - BIM objects
Find and specify sensors and detectors from top manufacturers with NBS Source. Browse BIM objects and Revit families for Sensors and detectors below. Classification Pr_75_50_76.
Can't find what you're looking for?
Recently verified
Showing 1-12 of 12
Ei3018 Carbon Monoxide (CO) Alarm - Carbon Monoxide (CO) Alarm
Verified 3 months ago
Aico Ltd
Carbon monoxide (CO) alarm. 230 V with ten year rechargeable lithium back-up. AudioLINK+. SmartLINK upgradeable.
Ei208WRF RadioLINK Carbon Monoxide (CO) Alarm - Carbon Monoxide (CO) Alarm
Verified 3 months ago
Aico Ltd
RadioLINK+ carbon monoxide (CO) alarm. Lithium battery powered. AudioLINK+.
Ei208 Carbon Monoxide (CO) Alarm - Carbon Monoxide (CO) Alarm
Verified 3 months ago
Aico Ltd
Carbon monoxide (CO) alarm. Lithium battery powered. AudioLINK+.
Infrared Thermostat Control [CE-STAT] - Remote Temperature Thermostat Controller
Verified 3 months ago
Cürv360
Wall mounted temperature controller up to eight panels.
Ei1025 Temperature, Humidity and CO2 Environmental Sensor - Environmental Sensor
Verified 4 months ago
Aico Ltd
Temperature, humidity and CO2 environmental sensor.
Ei1020 Temperature and Humidity Environmental Sensor - Environmental Sensor
Verified 4 months ago
Aico Ltd
Temperature and humidity environmental sensor.
SBS Sprinkler Control Panel
Verified over a year ago
nVent Thermal Management
Multi-circuit, panel mounted, single application controller compliant to EN60204-1/ EN61439-1 and compliant to BS EN 12845.
Discovery Carbon Monoxide Detector - Smoke detector
Verified over a year ago
Apollo Fire Detectors Ltd
Intelligent analogue addressable Carbon Monoxide Detector with five sensitivity mode settings and suitable as a secondary detector which responds well to deep seated fires.
Discovery Ionisation Detector - Smoke detectors
Verified over a year ago
Apollo Fire Detectors Ltd
Intelligent analogue addressable Ionisation Detector with five sensitivity mode settings and responds well to fast burning flaming fires.
Wall Mounted Programmable Sensor
Verified over a year ago
KWC DVS Limited
The Wall Mounted Programmable Sensor will allow quick and easy adjustment of settings including; run-on time, range, purge and more.
Tactile Switch with 38 mm Bezel for use with Control Plates
Verified over a year ago
KWC DVS Limited
Stainless steel bezel with a 38 mm outside diameter for us with DVS Bath Control Plate SH07-053/054/055.
Wave-On Sensor/ Tactile Switch with 50 mm Bezel
Verified over a year ago
KWC DVS Limited
Full Range of DVS Wave-On Sensors and Tactile Switches for use with DVS control systems.
Showing 1-12 of 12