by IPP Ltd
The MIB MetSIP is robustly engineered, with 75 mm deep cold-formed steel Sigma studs – plus a 45mm treated timber packer – at 600mm centres. 9mm thick Magply modified MgO boards form the inner and outer skins to the 136mm thick panels. Magply is largely unaffected by prolonged exposure to rain, while under independent testing, the material was shown to achieve 90 minutes fire resistance with minimal smoke generation. This means during the critical erection phase, before fire-stopping breaks and …
Show moreContact IPP Ltd by clicking the button below to find out which products were used in this case study.
Bath Rugby Club use Magply on Light Gauge Steel Frame
Oakworth Homes Timber Frame use 9mm Magply in Timber Frame Construction.
6mm Magply used as part of Langley Roofing Overlay at Essex High School
Ballymena Church Roof use Magply in Roof Build-up.
© 2020 NBS Enterprises Ltd. All rights reserved.
1 / 1