OVERVIEW
Low environmental impact...
CHALLENGE
All over the world architects and building owners are trying to create buildings with a low environmental impact. For this private house, the architect wanted to combine an aesthetical finish of a metal roof in combination with PV and hot water panels. The biggest issue for the architect was the fixing of these panels without having leak problems in the future.
SOLUTION
The roof was waterproofed using a RENOLIT ALKORPLAN roofing membrane that is mechanically fastened onto the supporting roof structure. Two kinds of PVC profiles were heat welded onto the waterproofing membrane: on the one hand RENOLIT ALKORDESIGN profiles (for aesthetical value only), on the other hand there are RENOLIT ALKORSOLAR profiles, which function as the base to attach the hot water and the PV panels. The gable was also finished with the RENOLIT ALKORDESIGN system.
Mechanically Fixed System With PIR Insulation Board - RENOLIT ALKORPLAN F
Design Profile System - RENOLIT ALKORPLAN Design
Mechanically Fixed System With Mineral Wool Insulation - RENOLIT ALKORPLAN F
When aesthetics and environmental consideration go hand-in-hand
Unique, aesthetic and ecological
Architectural freedom of design
Green facade covers like an envelope
Flat roof overlay at historic lighthouse. Koster TPO Membrane.
Single Ply Warm Roof Waterproofing on Residential block of flats.
Koster Green Roof Waterproofing - Koster TPO Membrane
Museum of the Home, London. Koster TPO Single Ply Membrane.
Flat roof overlay at historic lighthouse. Koster TPO Membrane.
Single Ply Warm Roof Waterproofing on Residential block of flats.
Koster Green Roof Waterproofing - Koster TPO Membrane
Museum of the Home, London. Koster TPO Single Ply Membrane.