NBS Source
I'm a manufacturer
Compare variants

TL-5™ Non-Cyclonic

Verified by manufacturer over a year ago

NSW, VIC and WA Only

Fielders Variant:

Walling and short span roofing profile. Available in NSW, SA, NT, VIC and WA.

Jump to:
+61 8 8292 3611 Website

Application

Suitable for both commercial or domestic use. Available in New South Wales, South Australia, Northern Territory, Victoria and Western Australia.


AUSTRALIAN STANDARDS

 

Published load capacity data is derived from testing in accordance with:

  •       AS 4040.0:1992.
  •       AS 4040.1:1992.
  •       AS 4040.2:1992.
  •       AS 4040.3:2018.

 

Published Limit state capacities are suitable to determine structural adequacy and serviceability in accordance with:

  •       AS/NZS 1170.0:2002 Structural design actions, Part 0: General principles.
  •       AS/NZS 1170.1:2002 (Reconfirmed 2016) Structural design actions, Part 1: Permanent, imposed and other actions.
  •       AS/NZS 1170.2:2011 (Reconfirmed 2016) Structural design actions, Part 2: Wind actions.
  •       AS/NZS 1170.3:2011 (Reconfirmed 2016) Structural design actions, Part 3: Snow and ice actions.

 

Published installation guidelines align with AS 1562.1:2018 Design and Installation of sheet and wall cladding.

 

Fielders steel products comply with:

  •       AS 1397:2011 Continuous hot-dip metallic coated steel sheet and strip - Coatings of zinc and zinc alloyed with aluminium and magnesium.
  •       AS/NZS 2728:2013 Prefinished/prepainted sheet metal products for interior/exterior building applications - Performance requirements.
  •       AS 1397:2011 which defines the coating types and classes and steel grades for hot dip metallic coated steel.

Description

TL-5™ Non-Cyclonic is a walling and short span roofing profile with specially designed capillary grooves. Some of its features include:

  • Quick and easy to install.
  • Long lasting and durable with complete watertightness.
  • Available in a range of colours and finishes.

General information

Material

Steel.

Shape

Trapezoid.

Warranty description

-

Manufacturer guidance

Covered by BlueScope material warranties, subject to project assessment and terms and conditions.

Uniclass

Pr_25_71_51_89 Steel profiled sheetPrimary

SpeedSpec

07610 Roofing and Roof Plumbing

07462 Cladding External Walls

NATSPEC National Classification System

0436 Cladding – Profiled and Seamed Sheet Metal

0423 Roofing – Profiled Sheet Metal

SpecPack

07600 Metal Roofing, Siding and Roof Plumbing

Specification data - Steel profiled sheet

Standards

To AS 1397 and AS/NZS 2728.

Guidance for specification option:

Installation of the cladding should be in accordance with AS 1562.1 and HB 39.

Grade

G550.

Coating class

AM100 (COLORBOND® steel).

AM125 (ZINCALUME® steel).

AM150 (COLORBOND® Ultra steel).

Z450 (Galvanised steel).

Z600 (Heritage Galvanised steel).

Base Metal thickness (BMT)

0.35 mm.

0.42 mm.

0.48 mm.

Profile

-

Form

Trapezoidal.

Height

29 mm.

Manufacturer guidance

Refers to rib height.

Cover width

762 mm.

Manufacturer guidance

Provide manufacturing tolerance of ±4 mm.

Colour

Basalt.

Guidance for specification option:

Available in COLORBOND® steel coating only.

Classic Cream.

Guidance for specification option:

Available in COLORBOND® steel coating only.

Cottage Green.

Guidance for specification option:

Available in COLORBOND® steel coating only.

Cove.

Guidance for specification option:

Available in COLORBOND® steel coating only.

Deep Ocean.

Guidance for specification option:

Available in COLORBOND® steel coating only.

Dune.

Guidance for specification option:

Available in COLORBOND® steel and COLORBOND® Ultra steel coating.

Haze.

Guidance for specification option:

Available in COLORBOND® steel coating only.

Gully.

Guidance for specification option:

Available in COLORBOND® steel coating only.

Ironstone.

Guidance for specification option:

Available in COLORBOND® steel coating only.

Jasper.

Guidance for specification option:

Available in COLORBOND® steel coating only.

Mangrove.

Guidance for specification option:

Available in COLORBOND® steel coating only.

Manor Red.

Guidance for specification option:

Available in COLORBOND® steel coating only.

Monument.

Guidance for specification option:

Available in COLORBOND® steel and COLORBOND® Ultra steel coating.

Night Sky.

Guidance for specification option:

Available in COLORBOND® steel coating only.

Pale Eucalypt.

Guidance for specification option:

Available in COLORBOND® steel coating only.

Paperbark.

Guidance for specification option:

Available in COLORBOND® steel coating only.

Shale Grey.

Guidance for specification option:

Available in COLORBOND® steel coating only.

Standard steel (for ZINCALUME® steel and galvanised steel variation only).

Guidance for specification option:

Available in silver matt finish only.

Surfmist.

Guidance for specification option:

Available in COLORBOND® steel and COLORBOND® Ultra steel coating.

Terrain.

Guidance for specification option:

Available in COLORBOND® steel coating only.

Wallaby.

Guidance for specification option:

Available in COLORBOND® steel and COLORBOND® Ultra steel coating.

Windspray.

Guidance for specification option:

Available in COLORBOND® steel and COLORBOND® Ultra steel coating.

Woodland Grey.

Guidance for specification option:

Available in COLORBOND® steel and COLORBOND® Ultra steel coating.

Manufacturer guidance

Colours are limited to certain finishes.

Finish

Painted (COLORBOND® steel).

Zinc-coated (ZINCALUME® steel and galvanised steel.)

Solar absorptance value (maximum)

-

Manufacturer guidance

Solar Absorptance values for COLORBOND® steel colours are available at http://steel.com.au/products/coated-steel/colorbond-steel/basix-and-bca-classification

Material

COLORBOND® steel.

ZINCALUME® steel.

Galvanised steel.

Length

-

Manufacturer guidance

Sheets are supplied custom cut to length to suit project requirements. Transportation limits apply.


To address thermal expansion and contraction, the recommended maximum sheet length is 24 m. Where lengths exceed 24 m, step joints or concealed decks are recommended.


Provide manufacturing tolerance of ±7 to 15 mm in length.

Span

900 mm.

1200 mm.

1500 mm.

1800 mm.

2100 mm.

Show more

Manufacturer guidance

Refers to maximum allowable spans. These vary depending on profile thickness and span type. Maximum spans are as follows:


  • 0.35 mm BMT walling: 1500 – 2500 mm.
  • 0.42 mm BMT roofing: 1100 – 1900 mm.
  • 0.42 mm BMT walling: 1600 – 2500 mm.
  • 0.48 mm BMT roofing: 1600 – 2600 mm.
  • 0.48 mm BMT walling: 1750 – 2500 mm.

Thermal expansion

-

Manufacturer guidance

To address thermal expansion and contraction, the recommended maximum sheet length is 24 m. Where lengths exceed 24 m, step joints or concealed decks are recommended.

Frame or support

Steel (1.0 to 3.5 mm BMT).

Guidance for specification option:

  • For crest fixing, use 12-14 x 25 mm Metal Teks HiGrip Hex Head or AutoTeks 12-14 x 50 mm screws.
  • For valley fixing, use 10-16 x 16 mm Metal Teks Hex Head screws.
  • If side lap fixing is necessary, use 10g-16 x 16 mm Hex Head Tek screws with seal.

Timber Hardwood.

Guidance for specification option:

  • For crest fixing, use 12-11 x 65 mm Type 17 HiGrip Hex Head screws.
  • For valley fixing, use 10-12 x 25 mm Type 17 Hex Head or 10-16 x 25 mm Designer Head or 12-11 x 25 mm Type 17 Hex Head screws.
  • If side lap fixing is necessary, use 10g-16 x 16 mm Hex Head Tek screws with seal.

Timber Softwood.

Guidance for specification option:

  • For crest fixing, use 12-11 x 65 mm Type 17 HiGrip Hex Head screws or RoofZips M6-11 x 65 mm.
  • For valley fixing, use 10-12 x 25 mm Type 17 Hex Head or 10-16 x 25 mm Designer Head or 12-11 x 25 mm Type 17 Hex Head or RoofZips M6-11 x 25 mm.
  • If side lap fixing is necessary, use 10g-16 x 16 mm Hex Head Tek screws with seal.

Metal Battens (0.55 to 1.0 mm BMT).

Guidance for specification option:

  • For crest fixing, use RoofZips M6-11 x 50 mm.
  • For valley fixing, use 10-16 x 16 mm Metal Teks Hex Head or 10-16 x 25 mm Designer Head or RoofZips M6-11 x 25 mm.
  • If side lap fixing is necessary, use 10g-16 x 16 mm Hex Head Tek screws with seal.

Manufacturer guidance

Refers to recommended fixing supports and fasteners. Use four fasteners per sheet.

Mass

3.60 – 3.68 kg/m² (0.35 mm BMT).

4.28 – 4.35 kg/m² (0.42 mm BMT).

4.86 – 4.93 kg/m² (0.48 mm BMT).

Insulation

-

Manufacturer guidance

When insulation thickness up to 50 mm are installed, screws may need to be increased in number depending on insulation thickness and density.


For insulation thicknesses greater than 50 mm, Fielders® recommends the use of a thermal spacer.

Installation

Pierced-fixed.

Manufacturer guidance

Use crest fixing for roofing and valley fixing for walling.

Ancillary components

T-Lap™ system.

Manufacturer guidance

Optionally available as end joint or expansion joint solution. Contact manufacturer for further details.

Sustainability data

Country of material origin

Australia

Country of product manufacture

Australia

Recyclability

100% Recyclable.

© 2024 NBS Enterprises Ltd. All rights reserved.