Rockcote Quick Render PM100
Verified by manufacturer over a year ago
A pre-blended polymer-modified cement render.
Application
- Quick Render PM100 is suitable for application over properly prepared substrates such as polystyrene, brick, block, concrete, AAC blocks and panels, tilt up.
- Suitable for interior and exterior use.
- Quick Render PM100 must be overcoated within 28 days of application.
Rockcote Quick Render PM100 is designed for a medium grade, rendered finish. Rockcote Quick Render products should always be used as part of a full Rockcote system specification.
EPS Polystyrene (Premium Texture System)
Step 1. Rockcote Quick Render PM 100
Step 2. Rockcote Texprime
Step 3. Rockcote Sandcote Hydratech
AAC 75 mm Panel (Painted Texture System)
Step 1. Rockcote Quick Render PM 100
Step 2. Rockcote Tuscany Trowel On
Step 3. Rockcote Masonry Primer Hi Op
Step 4. Rockcote Armour Flex
Step 5. Rockcote Armour Flex
Core Filled FC Sheet (Painted Texture System)
Step 1. Rockcote Quick Render PM 100
Step 2. Rockcote Sandcote
Step 3. Rockcote Masonry Primer Hi Op
Step 4. Rockcote Armour Flex
Step 5. Rockcote Armour Flex
Description
Quick Render PM100 is a pre-blended polymer-modified cement render. Properly cured Quick Render PM100 exhibits minimal drying shrinkage and is a reliable surface for over-coating with acrylic textures and paints.
Quick Render PM100 is simple to mix and easy to apply and
finish. It has been formulated for use over expanded and extruded polystyrene walling systems. Some of its significant features include:
- Easy to use and tough.
- Water repellent.
- Excellent adhesion to properly prepared substrates.
- Acrybond not required, just add water.
- Forms part of a warranted system for expanded and extruded polystyrene walling systems.
- Excellent abrasion resistance.
General information
Size | Manufacturer guidance20 kgs pack. |
Warranty description | Manufacturer guidanceUp to 15 year* warranty when applied as part of a full Rockcote coating system. * Depending on substrate and finish. |
Uniclass | |
NATSPEC National Classification System | 0611a Rendering and Plastering – Cement Render 0611 Rendering and Plastering |
SpeedSpec | 09210 Cement Render |
SpecPack | 09210 Cement Render |
Specification data - Polymer-modified renders
Cement | General purpose (GP) cement. |
Sand | Medium. |
Additives | Mineral.Organic. |
Colour | Grey. |
Execution | Trowel.Spray. |
Dry film thickness | 4-10 mm. |
Number of coats | 1 coat. Guidance for specification option: Depending on substrate and method of application. Manufacturer guidanceApplication not to exceed 30 mm per single coat. If the total thickness of the material is to exceed 30 mm, please contact the ROCKCOTE Technical Department. |
Drying time | 48-72 hours (full curing). Manufacturer guidanceDries in approximately 8 hours under normal drying conditions. (Dry times vary with changes in temperature and humidity and residual moisture in the substrate). |
Substrates | AAC blocks and panels. Block. Brick. Concrete. Off-form concrete. |
Sustainability data
Contains Red List materials | No |
Country of material origin | Australia |
Country of product manufacture | Australia |
Literature
QuickRender_PM100_TDS_September2020
QuickRender_PM100_SDS_February2020
Rockcote Quick Render Range