Rockcote Quick Render Premium Sponge
Verified by manufacturer over a year ago
Rockcote Quick Render Premium Sponge is a pre-blended cement render. It exhibits minimal drying shrinkage and creates a reliable surface for over-coating with Rockcote acrylic textures and paints.
Application
- Rockcote Quick Render Premium Sponge is suitable for application over properly prepared substrates such as brick, block, concrete, AAC blocks, panels, tilt up.
- Suitable for interior and exterior use.
- Rockcote Quick Render Premium Sponge is ideal to use as a base coat for Rockcote acrylic Coloured Renders, roll on textures and membrane paints and coatings.
- Rockcote Quick Render Premium Sponge should be overcoated within 28 days of application.
Rockcote Quick Render Premium Sponge is simple to mix and easy to apply and finish and can be used in skim coat applications. Can be applied as thin as 2 mm, without the need for adding bond to the mixture. Rockcote Quick Render products should always be used as part of a full Rockcote system specification.
Brick & Blockwork (Painted Render System)
Step 1. Rockcote Quick Render Premium Sponge
Step 2. Rockcote Masonry Primer Hi Op
Step 3. Rockcote Armour
Step 4. Rockcote Armour
Off Form Concrete & Masonry (Premium Texture System)
Step 1. Rockcote High Adhesion Primer
Step 2. Rockcote Quick Render Premium Sponge
Step 3. Rockcote Texprime
Step 4. Rockcote Sandcote Hydratech
Brick & Blockwork (Painted Texture System)
Step 1. Rockcote Quick Render Premium Sponge
Step 2. Rockcote Tuscany Trowel On
Step 3. Rockcote Masonry Primer
Step 4. Rockcote Armour Flex
Step 5. Rockcote Armour Flex
Description
Quick Render Premium Sponge is a pre-blended cement render. Properly cured, Quick Render Premium Sponge exhibits minimal drying shrinkage and is a reliable surface for over-coating with acrylic textures and paints. Quick Render Premium Sponge is simple to mix and easy to apply and finish and can be used in skim coat applications. Premium Sponge can be applied as thin as 2 mm, without the need to add extra bond to the mix. Some of its significant features include:
- Easy to use and tough.
- Excellent adhesion to properly prepared substrates.
- Long term exterior protection.
- Water repellent.
- Ideal base coat for coloured textures.
- Excellent abrasion resistance.
General information
Size | Manufacturer guidance20 kgs pack. |
Warranty description | Manufacturer guidanceUp to 15 year* warranty when applied as part of a full Rockcote coating system. * Depending on substrate and finish. |
Uniclass | |
NATSPEC National Classification System | 0611a Rendering and Plastering – Cement Render 0611 Rendering and Plastering |
SpeedSpec | 09210 Cement Render |
SpecPack | 09210 Cement Render |
Specification data - Cementitious renders
Cement | Off White Cement. |
Sand | Medium - Fine. |
Additives | Mineral.Organic. |
Colour | Off white. |
Execution | Trowel.Spray. |
Dry film thickness | 2 - 10 mm. |
Number of coats | 1 coat. |
Drying time | 48-72 hours Manufacturer guidanceDries in approximately 8 hours under normal drying conditions. (Dry times vary with changes in temperature and humidity and residual moisture in the substrate). |
Substrates | Brick. Block. Concrete. AAC blocks. Tilt up Panels. |
Sustainability data
Contains Red List materials | No |
Country of material origin | Australia |
Country of product manufacture | Australia |
Literature
QuickRender_PremiumSponge_TDS_September2020
QuickRender_PremiumSponge_SDS_February2020
Rockcote Quick Render Range