Rockcote Quick Render High Strength
Verified by manufacturer over a year ago
Rockcote Quick Render High Strength has been optimised for high early strength at lower coating thicknesses.
Application
- Quick Render High Strength is suitable for application over suitable, dimensionally stable, properly prepared substrates including brick, block, concrete, EPS (Expanded Polystyrene), AAC blocks and panels, off-form concrete, tilt-up panels and most previously painted surfaces.
- Suitable for interior and exterior use.
- Quick Render High Strength is ideal to use as a base coat for Rockcote acrylic Coloured Renders and roll on textures.
- Quick Render High Strength must be overcoated within 28 days of application.
Rockcote Quick Render High Strength is designed for a smooth render finish. Suitable for builds of 2-10 mm are required in a single application. Rockcote Quick Render products should always be used as part of a full Rockcote system specification.
Brick & Block (Painted Render System)
Step 1. Rockcote Quick Render High Strength
Step 2. Rockcote Masonry Primer Hi Op
Step 3. Rockcote Armour
Step 4. Rockcote Armour
Off Form Concrete & Masonry (Painted Render System)
Step 1. Rockcote High Adhesion Primer
Step 2. Rockcote Quick Render High Strength
Step 3. Rockcote Masonry Primer Hi Op
Step 4. Rockcote Armour
Step 5. Rockcote Armour
Brick & Block (Painted Texture System)
Step 1. Rockcote Quick Render High Strength
Step 2. Rockcote Sandcote
Step 3. Rockcote Masonry Primer Hi Op
Step 4. Rockcote Armour
Step 5. Rockcote Armour
Description
Quick Render High Strength is a pre-blended high polymer cement render. Properly cured, Quick Render High Strength exhibits minimal drying shrinkage and is a reliable surface for over-coating with acrylic textures and paints. This product has been optimised for high early strength, at lower coating thicknesses. Some of its significant features include:
- Easy to use and tough.
- Long term exterior protection.
- Excellent adhesion to properly prepared substrates.
- Rockcote Acrybond not required, just add water.
- Ideal base coat for coloured textures.
- Excellent abrasion resistance.
General information
Size | Manufacturer guidance20 kgs pack. |
Warranty description | Manufacturer guidanceUp to 15 year* warranty when applied as part of a full Rockcote coating system. * Depending on substrate and finish. |
Uniclass | |
NATSPEC National Classification System | 0611a Rendering and Plastering – Cement Render 0611 Rendering and Plastering |
SpeedSpec | 09210 Cement Render |
SpecPack | 09210 Cement Render |
Specification data - Polymer-modified renders
Cement | General purpose (GP) cement. |
Sand | Medium fine. |
Additives | Mineral.Organic. |
Colour | Off white. |
Execution | Trowel.Spray. |
Dry film thickness | 2-10 mm. |
Number of coats | 1-2 coat. Guidance for specification option: Depending on substrate and method of application. |
Drying time | 48-72 hours (full curing). Manufacturer guidanceDries in approximately 8 hours under normal drying conditions. (Dry times vary with changes in temperature and humidity and residual moisture in the substrate). |
Substrates | AAC blocks and panels. Block. Brick. Concrete. EPS (Expanded Polystyrene). |
Sustainability data
Contains Red List materials | No |
Country of material origin | Australia |
Country of product manufacture | Australia |
Literature
QuickRender_HighStrength_TDS_February2021
QuickRender_HighStrength_SDS_June2020
Rockcote Quick Render Range
Similar products from Rockcote
Concrete Finish
Rockcote Quick Render Coarse
Rockcote Quick Render Fibre Reinforced
Rockcote Quick Render Fine
Rockcote Quick Render Grey
Rockcote Quick Render Non-Combustible
Rockcote Quick Render Off White
Rockcote Quick Render PM100
Rockcote Quick Render PM100 High Build
Rockcote Quick Render Premium Sponge