Rockcote Quick Render PM100 High Build
Verified by manufacturer over a year ago
A pre-blended polymer-modified cement render.
Application
- Quick Render PM100 High Build adheres well to standard and difficult masonry substrates such as bricks, concrete blocks, AAC panel, off-form concrete and specified lightweight building substrates, such as core filled fibre cement sheet when properly prepared.
- Suitable for interior and exterior use.
Rockcote Quick Render PM100 High Build is designed for a medium grade, rendered finish. Rockcote Quick Render products should always be used as part of a full Rockcote system specification.
Description
Quick Render PM100 High Build is a pre-blended polymer-modified cement render. Quick Render PM100 High Build is simple to mix and easy to apply and finish. PM100 High Build has been formulated to build up and level undulating clay and cement block masonry. Can be built out to 30mm. Some of its significant features include:
- Easy to use.
- Water repellent.
- Excellent adhesion to properly prepared substrates.
- Acrybond not required, just add water.
- Manufactured with low density materials.
- Insulative properties.
- Fibre reinforced.
- Lighter in weight than standard renders.
- Ideal levelling base coat before the application of Rockcote Coloured Renders and textures.
General information
Size | Manufacturer guidance12 kgs pack. |
Warranty description | Manufacturer guidanceUp to 15 year* warranty when applied as part of a full Rockcote coating system. * Depending on substrate and finish. |
Uniclass | |
NATSPEC National Classification System | 0611a Rendering and Plastering – Cement Render 0611 Rendering and Plastering |
SpeedSpec | 09210 Cement Render |
SpecPack | 09210 Cement Render |
Specification data - Polymer-modified renders
Cement | Off White Cement. |
Sand | Medium. |
Additives | Mineral.Organic.Polystyrene. |
Colour | Grey. |
Execution | Trowel.Spray. |
Dry film thickness | 5-30 mm. |
Number of coats | 1 coat. Guidance for specification option: Depending on substrate and method of application. Manufacturer guidanceApplication not to exceed 30 mm per single coat. If the total thickness of the material is to exceed 30 mm, please contact the ROCKCOTE Technical Department. |
Drying time | 48-72 hours (full curing). Manufacturer guidanceDries in approximately 48 hours under normal drying conditions. (Dry times may vary with changes in temperature, humidity and residual moisture in the substrate. PLEASE NOTE THAT A 20 to 30 mm THICK COAT NEEDS EXTRA TIME TO CURE AND DRY OUT BEFORE TEXTURING CAN COMMENCE). |
Substrates | AAC panels. Brick. Concrete block. Off-form concrete. Block. Manufacturer guidancePlease refer to the ROCKCOTE Systems Guide for all suitable substrates. |
Sustainability data
Contains Red List materials | No |
Country of material origin | Australia |
Country of product manufacture | Australia |
Literature
QuickRender_PM100HighBuild_TDS_September2020
Rockcote Quick Render Range
QuickRender_PM100HighBuild_SDS_April2021