Rockcote Quick Render Grey
Verified by manufacturer over a year ago
Rockcote Quick Render Grey is a pre-blended cement render. It exhibits minimal drying shrinkage and creates a reliable surface for over-coating with Rockcote acrylic textures and paints.
Application
- Rockcote Quick Render Grey is suitable for application over properly prepared substrates such as brick, block, concrete, AAC blocks & panels, tilt up.
- Suitable for interior and exterior use.
- Rockcote Quick Render Grey is ideal to use as a base coat for Rockcote acrylic Coloured Renders, roll on textures and membrane paints and coatings.
- Rockcote Quick Render Grey should be overcoated within 28 days of application.
Rockcote Quick Render Grey is designed for a medium grade, rendered finish. Rockcote Quick Render Grey is ideal for use in harsher drying conditions where a slower drying rate is required. Rockcote Quick Render products should always be used as part of a full Rockcote system specification.
Brick & Block (Painted Render System)
Step 1. Rockcote Quick Render Grey
Step 2. Rockcote Masonry Primer Hi Op
Step 3. Rockcote Armour
Step 4. Rockcote Armour
Off Form Concrete & Masonry (Painted Texture System)
Step 1. Rockcote High Adhesion Primer
Step 2. Rockcote Quick Render Grey
Step 3. Rockcote Tuscany Trowel On
Step 4. Rockcote Masonry Primer Hi Op
Step 5. Rockcote Armour
Step 6. Rockcote Armour
Brick & Block (Concrete Look System)
Step 1. Rockcote Quick Render Grey
Step 2. Rockcote Texprime
Step 3. Rockcote Concrete Finish
Step 4. Rockcote Concrete Finish
Step 5. Rockcote Clearcote/Repel
Description
Quick Render Grey is a pre-blended cement render. Properly cured, Quick Render Grey exhibits minimal drying shrinkage and is a reliable surface for over-coating with acrylic textures and paints. Quick Render Grey has a longer pot life, and an increased working and finishing time during application. Quick Render Grey can also be "brought back" or reactivated during drying by lightly spraying with water. Quick Render Grey is ideal for use in harsher drying conditions where a slower drying rate is required. Some of its significant features include:
- Easy to use and tough.
- Excellent adhesion to properly prepared substrates.
- Long term exterior protection.
- Water repellent.
- Ideal base coat for coloured textures.
- Excellent abrasion resistance.
General information
Size | Manufacturer guidance20 kgs pack. |
Warranty description | Manufacturer guidanceUp to 15 year* warranty when applied as part of a full Rockcote coating system. * Depending on substrate and finish. |
Uniclass | |
NATSPEC National Classification System | 0611a Rendering and Plastering – Cement Render 0611 Rendering and Plastering |
SpeedSpec | 09210 Cement Render |
SpecPack | 09210 Cement Render |
Specification data - Cementitious renders
Cement | General purpose (GP) cement. |
Sand | Medium. |
Additives | Mineral.Organic. |
Colour | Grey. |
Execution | Trowel.Spray. |
Dry film thickness | 4-10 mm. |
Number of coats | 1 coat. Guidance for specification option: Depending on substrate and method of application. |
Drying time | 48-72 hours (full curing). Manufacturer guidanceDries in approximately 8 hours under normal drying conditions. (Dry times vary with changes in temperature and humidity and residual moisture in the substrate). |
Substrates | Brick. Block. Concrete. AAC blocks. Tilt up Panels. |
Sustainability data
Contains Red List materials | No |
Country of material origin | Australia |
Country of product manufacture | Australia |
Literature
QuickRender_Grey_TDS_September2021
QuickRender_Grey_SDS_February2020
Rockcote Quick Render Range