PermaTEC LI Inverted Roof System

Guidance for specification option:

IKO Permatec Polymer Primer is synthetic rubber based primer for use on concrete and other similar substrates prior to the installation of IKO Permatec Hot Melt Waterproofing System.

• Code: 246025000.
• Appearance: Liquid.
• Colour: Red.
• Size: 25 Litres.
• Weight: 25 kg.
• Use: Primer.
• Application Rates: Up to 4 m²/Litre.
• Drying Time: Typically 1 Hour.

Guidance for specification option:

IKO Permatec High Penetration Primer is bituminous primer for use on concrete and other similar substrates prior to the installation of IKO Permatec Hot Melt Waterproofing System.

• Code: 24600025.
• Appearance: Liquid.
• Colour: Black.
• Size: 25 Litres.
• Weight: 25 kg.
• Use: Primer.
• Application Rates: Up to 6—8 m²/Litre.
• Drying Time: Typically 4 Hours.

Guidance for specification option:

IKO Permatec Polymer Primer is synthetic rubber based primer for use on concrete and other similar substrates prior to the installation of IKO Permatec Hot Melt Waterproofing System.

• Code: 246025000.
• Appearance: Liquid.
• Colour: Red.
• Size: 25 Litres.
• Weight: 25 kg.
• Use: Primer.
• Application Rates: Up to 4 m²/Litre.
• Drying Time: Typically 1 Hour.

Guidance for specification option:

IKO Permatec High Penetration Primer is bituminous primer for use on concrete and other similar substrates prior to the installation of IKO Permatec Hot Melt Waterproofing System.

• Code: 24600025.
• Appearance: Liquid.
• Colour: Black.
• Size: 25 Litres.
• Weight: 25 kg.
• Use: Primer.
• Application Rates: Up to 6—8 m²/Litre.
• Drying Time: Typically 4 Hours.

Guidance for specification option:

A hot-applied, specially formulated combination of refined bitumen, synthetic rubbers, fillers and other additives.

• Product Colour: Black.
• Product Type: Hot Melt.
• Applied on a primed deck with Flash R reinforcement.

Guidance for specification option:

IKO Permaguard-F is a sand surfaced 180 g/m² polyester based bitumen membrane. It is installed as a protection layer into the final coat of the IKO Permatec whilst it is still hot.

• Product Colour: Black.
• Product Finish: Sand.
• Product Type: Hot Melt.
• Length: 20000 mm.
• Weight: 39 kg.
• Width: 1000 mm.
• Laid on hot Permatec.

Guidance for specification option:

IKO enertherm WCL is used as a Water Flow reducing Layer between enertherm XPS insulation and the roof ballast layer in inverted roofs, including green and blue roof applications.

• Code: 30400001.
• Length: 100 m.
• Width: 1.5 m.
• Area per roll: 120 m².
• Loose laid.

Guidance for specification option:

A nominal 1.25 mm thick flexible bitumen EPDM polymer detailing sheet which is installed as a reinforcement layer over cracks, construction joints, changes in materials and where minor movement may occur.

• Code: 24150000.
• Roll weight: 4.8 kg.
• Roll width: 150 mm.
• Roll length: 20 m.

Guidance for specification option:

A flexible bitumen EPDM polymer detailing sheet, which is installed as a reinforcement layer around rainwater outlets.

• Code: 24500000.
• Roll weight: 16 kg.
• Roll width: 500 mm.
• Roll length: 20 m.

Guidance for specification option:

A very flexible un-cured neoprene rubber reinforcement sheet for use as part of the IKO Permatec hot melt waterproofing system over construction joints and structural movement joints with a maximum width of 25 mm and maximum 50% total movement.

• Code: 24600000.
• Roll weight: 21 kg.
• Roll width: 300 mm.
• Roll length: 30 m.

Guidance for specification option:

A 55 g/m² polyester reinforcement layer, installed between the two applications of PermaTEC EcoWrap or PermaTEC Anti- Root.

• Code: 24991000.
• Roll weight: 11 kg.
• Roll width: 1 m.
• Roll length: 20 m.

Guidance for specification option:

A sand surfaced 180 g/m² polyester based bitumen membrane, installed as a protection layer in standard PermaTEC and PermaTEC Anti Root systems.

• Code: 24010000.
• Roll weight: 42 kg.
• Roll width: 1 m.
• Roll length: 20 m.

Guidance for specification option:

A high performance torch applied SBS modified bitumen membrane with a 270 g/m² polyester fibre carrier. It has a black mineral finish on the upper surface and thermos-fusible film on the underside. It is installed as a protection layer to PermaTEC on exposed upstand details.

• Code: 24030008.
• Roll weight: 36 kg.
• Roll width: 1 m.
• Roll length: 8 m.

Guidance for specification option:

IKO enertherm XPS is a lightweight, lap joined board with high compressive strength and performance.

• Available in thickness 50—245 mm.
• Durability: Continuous service temperature limit is up to +70º C.
• Water Vapour Resistance: 625 MNs/g.m when tested in accordance with BS EN 12086.
• Moisture Absorption: 0.6% by volume when tested in accordance with EN 12087.
• Nominal Density: 32 kg/m³.
• Loose laid.

Guidance for specification option:

Consult manufacturer and insert requirements.

Guidance for specification option:

Supplied by others.