Junior 80 B Pocket (Sliding Door Hardware) - Sliding Door

Sliding hardware for wall pocket solutions, for use with single wooden doors with a weight up to 80 kg, an opening width between 70–1500 mm, and a thickness between 40–50 mm.

Features and benefits:

• Suitable for use in low headroom applications.
• Helps to optimize room space.
• Fitting and removing the running track is possible due to the provision of a retainer profile with a bayonet lock.
• All components can be replaced or extended, dependent on project requirements.
• Easy insertion of the door into the pocket: The pivot point of the suspension unit is at the end of the door on the pocket side. The suspension unit on the pocket side can be pushed towards the middle of the door during installation.
• Easy and efficient height adjustment when the door is installed.
• The suspension unit has been designed specifically for pocket installation, and the clip-on cover is suitable for concealed mounting.
• The separating layer between the running track and retainer profile reduces vibration transmission (structure-borne noise).
• The end position can be adjusted via the suspension trolley in the pocket when the door is open.
• Includes a laterally adjustable rattle-proof floor-mounted guide and a rattle-proof, removable top track assembly.
• Door push-out can be integrated in the running track.
• Vertically adjustable (±3 mm), with integrated anti-twist protection. Horizontally adjustable (± 8 mm) in the bayonet.
• Assembly set offers a high level of protection from running track contamination during the construction phase.
• The rattle-proof bayonet lock with entry ramp makes it easier to install the running track in the retainer profile.

Components:

Quantities of each component will vary dependent on variant specified (consult manufacturer for details).

• Two-wheeled trolley M10, with plastic wheels.
• Top fixed suspension with plate and hanger bolt M10 (25074, two supplied) and 20 mm longer than standard bolt for 26014 only (two supplied) – allows the running track to be covered from below with removable ceiling elements.
• Track stop with adjustable retaining force.
• Screw-on rubber door stop.
• Rattle proof guide for screw mounting to floor with groove width 10 mm, black plastic 35 mm long, laterally adjustable).
• Suspension assembly locking wrench.