HiKlip® 630 Cyclonic
Verified by manufacturer over a year ago
COLORBOND® Ultra Steel
COLORBOND® Ultra Steel
High rainwater-carrying roofing with concealed-fixed installation.
Application
Suitable for major commercial, industrial and domestic projects. Can also be installed as walling.
AUSTRALIAN STANDARDS
Published load capacity data is derived from testing in accordance with:
- AS 4040.0:1992.
- AS 4040.1:1992.
- AS 4040.2:1992.
- AS 4040.3:2018.
Published Limit state capacities are suitable to determine structural adequacy and serviceability in accordance with:
- AS/NZS 1170.0:2002 Structural design actions, Part 0: General principles.
- AS/NZS 1170.1:2002 (Reconfirmed 2016) Structural design actions, Part 1: Permanent, imposed and other actions.
- AS/NZS 1170.2:2011 (Reconfirmed 2016) Structural design actions, Part 2: Wind actions.
- AS/NZS 1170.3:2011 (Reconfirmed 2016) Structural design actions, Part 3: Snow and ice actions.
Published installation guidelines align with AS 1562.1:2018 Design and Installation of sheet and wall cladding.
Fielders steel products comply with:
- AS 1397:2011 Continuous hot-dip metallic coated steel sheet and strip - Coatings of zinc and zinc alloyed with aluminium and magnesium.
- AS/NZS 2728:2013 Prefinished/prepainted sheet metal products for interior/exterior building applications - Performance requirements.
- AS 1397:2011 which defines the coating types and classes and steel grades for hot dip metallic coated steel.
Description
HiKlip® 630 Cyclonic is a high rainwater-carrying roofing with concealed-fixed installation. It is the largest of such profile in Australia and is purposely built for stormy weathers. Some of its features include:
- Combination of durability and aesthetics.
- Large spanning capabilities for lower costs.
- Ability to rollform on-site.
- Available in a range of colours and finishes.
General information
Material | Steel. |
Shape | Rectangle |
Warranty description | 20 years. Manufacturer guidanceCovered by BlueScope material warranties. Warranty of up to 20 years, subject to project assessment and terms and conditions. |
Uniclass | |
SpeedSpec | 07610 Roofing and Roof Plumbing 07462 Cladding External Walls |
NATSPEC National Classification System | 0436 Cladding – Profiled and Seamed Sheet Metal 0423 Roofing – Profiled Sheet Metal |
SpecPack | 07600 Metal Roofing, Siding and Roof Plumbing |
Specification data - Steel profiled sheet
Standards | To AS 1397 and AS/NZS 2728.Guidance for specification option: Installation of the cladding should be in accordance with AS 1562.1 and HB 39. |
Grade | G550. |
Coating class | AM150. |
Base Metal thickness (BMT) | 0.42 mm.Guidance for specification option: Total Coated Thickness of 0.47 mm. 0.48 mm.Guidance for specification option: Total Coated Thickness of 0.53 mm. Manufacturer guidanceIndicated Total Coated Thickness (TCT) is based on standard COLORBOND®, single-sided material. |
Profile | |
Form | Trapezoidal. |
Height | 66 mm.Manufacturer guidanceRefers to rib height. |
Cover width | 630 mm.Manufacturer guidanceProvide manufacturing tolerance of ±4 mm. |
Colour | Dune.Monument.Surfmist.Wallaby.Windspray.Woodland Grey. |
Finish | Painted. |
Solar absorptance value (maximum) | 0.32–0.73.Manufacturer guidanceValue is dependant on colour. Contact manufacturer for further assistance. |
Material | COLORBOND® steel. |
Length | Manufacturer guidanceSheets are supplied custom cut to length to suit project requirements. Transportation limits apply. To address thermal expansion and contraction, the recommended maximum sheet length is 24 m. Where lengths exceed 24 m, step joints or concealed decks are recommended. Provide manufacturing tolerance of ±7 mm in length. |
Span | 450 mm. 600 mm. 900 mm. 1200 mm. 1500 mm. Manufacturer guidanceRefers to maximum allowable spans per wind region. These vary depending on building height, profile thickness and span type. Maximum recommended spans for buildings less than 5 m high are:
Maximum recommended spans for buildings 5 to 10 m high are:
|
Cyclonic performance | To AS 1170.2-2011 and AS 4040.0-1992. |
Thermal expansion | 2.9 mm average per 5.0 m. Manufacturer guidanceComputed at 50° C change. |
Frame or support | Steel (1.5 mm). Guidance for specification option: Affix clips to the steel support with 12g-14 x 20 mm Hex Head Tek screws for clip-fixing and 14g-10 x 95 mm Head Head Tek screws for edge restraint. Manufacturer guidanceRefers to recommended fixing supports and fasteners. Use four fasteners per clip. |
Mass | 5.17 – 5.49 kg/m² (0.42 mm BMT). 5.87 – 6.23 kg/m² (0.48 mm BMT). |
Insulation | Manufacturer guidanceWhen insulation thickness up to 50 mm are installed, screws may need to be increased in number depending on insulation thickness and density. For insulation thicknesses greater than 50 mm, Fielders® recommends the use of a thermal spacer. |
Installation | Concealed clip fixed. Manufacturer guidanceTo be installed with HiKlip® 630 Concealed Fix Clipping System. |
Manufacturing location | Manufactured on-site with Fielders Mobile Mill. Manufactured at a Fielders facility and transported to project site. |
Ancillary components | Masonry Parapet Side Wall (Low or High). Apron Flashings. Overflashing. Headwall Apron Flashing. Soaker Gutter. Manufacturer guidanceOptionally available. Contact manufacturer for further details. |
Sustainability data
Country of material origin | Australia |
Country of product manufacture | Australia |
Recyclability | 100% Recyclable. |
Similar products from Fielders
ARAMAX® (COLORBOND® Steel)
CorroMax 21® Non-Cyclonic
CorroMax 35® Non-Cyclonic
FreeForm® (COLORBOND® Steel)
HiKlip® 630 Non-Cyclonic
HiRib™ 680 Cyclonic
HiRib™ 680 Non-Cyclonic
KingKlip® 700 Cyclonic
KingKlip® 700 Non-Cyclonic
Lo-Rib™ Non-Cyclonic