Flowcoat Terrosso
Verified by manufacturer over a year ago
Flowcoat Terrosso (Light Non-slip Satin)
Flowcoat Terrosso (Light Non-slip Satin)
AWTA Test results
Certificate type
Epoxy resin-based flooring sytem featuring decorative acrylic flake blends.
Application
- Ideal for dry process areas, public areas, shops, showrooms, department stores, designer outlets, restaurants, garden centres, airports, schools and hospitals.
- Well suited for commercial applications.
Description
An epoxy resin-based floor system with decorative coloured acrylic flake blends scattered over a pigmented epoxy base coat and finished with a tough resistant clear sealer.
- Slip-resistant.
- Hard-wearing and durable.
- Abrasion and chemical resistant protective coating.
- Easy to apply and low maintenance.
- Low VOC at 28 g/L.
- Non-hazardous to health and the environment.
- Seamless, hygienic finish.
- Available in bespoke colours.
General information
Color | Manufacturer guidanceFor a full colours chart and samples, Contact manufacturer. |
Finish | Epoxy Gloss Satin Anti-slip |
Material | Resin |
Warranty description | Manufacturer guidanceGuaranteed against defective materials and manufacture. Subject to Flowcrete standard ‘Warranty, Terms and Conditions of Sale. Check with manufacturer for details. |
Uniclass | |
NATSPEC National Classification System | 0657 Resin Based Seamless Flooring |
SpecPack | 09400 Terrazzo |
SpeedSpec | 03365 Concrete Finishes |
Product range |
Specification data - Resin flooring systems
Substrate preparation | Manufacturer guidanceConcrete should be finished by steel trowel. Surface preparation is to be completed by totally enclosed light shot blasting (please note this may leave track and blast lines which will not be covered) or diamond grinding to a minimum CSP2 prior to any coating application. For proper methods, refer to ICRI’s Technical Guideline No.03732. |
Standard | To AS/ISO 9239.1 and AS 4586. |
Primer | Flowcoat OP. |
Resin coating | Flowcoat OP. |
Aggregate | 60 Mesh White Aluminium Oxide. |
Sealer | Satin Seal WB. Flowseal UV Satin. |
Colour | Asteroid Galaxy. Milky Way. Moon. Nebula. |
Finish: | Light Non-slip Satin. |
NominalThickness | 1.5 mm. |
Slip resistance | P4 (Based on 60 mesh white aluminium oxide). Manufacturer guidanceSlip resistance method describedin AS 4586. |
Coving | Manufacturer guidanceCoving can form an integral part of the flooring system. It creates a sealed finish between the floor and wall joint. Please refer to Flowtex F1 Coving Mortar for further information. |
Curing | Foot traffic curing between 18 to 48 hours. Manufacturer guidanceCure time depends on the ambient temperature. Check and verify with the manufacturer. |
Fire performance | Tested to AS/ISO 9239.1 |
Fire resistance | Critical Heat Flux value and Heat Flux - 30 minutes value @ -kW/m². Smokevalue @ 19% (Mean). |
VOC content | Less than 140 g/L. |
Sustainability data
Country of product manufacture | Malaysia |
Third party certifications
AWTA Test results
Flowcoat Terrosso AWTA Fire Test
AWTA Test results
Flowfast Terrosso AWTA Fire Test
Case studies
Ready to Set Sail at the Brisbane International Cruise Terminal
Similar products from Flowcrete
Deckcoat EP
Deckshield ED Rapide
Flowcoat OP
Flowfresh SR
Flowshield ESD SL