NBS Source
I'm a manufacturer

Deckcoat EP

Verified by manufacturer over a year ago

Flowcrete

High performance, colourful, watertight car park deck coating system for car park bays and straight driveway areas.

Jump to:
1800 318 038 Website

Application

  • Typically used to cosmetically enhance, reduce noise and brighten internal car parks.
  • An attractive coating system that brightens up dull, dark and musty industrial environment.

Description

A car park deck coating system that provides a colourful, watertight surface for car park bays and straight driveway areas.


  • Slip-resistant.
  • Hard-wearing and durable.
  • Abrasion and chemical resistant protective coating.
  • Easy to apply and low maintenance.
  • Low VOC at 28 g/L.
  • Non-hazardous to health and the environment.
  • Seamless, hygienic finish.

General information

Finish

Anti-slip

Coated

Material

Epoxy resin

Warranty description

-

Manufacturer guidance

Check with manufacturer for details.

Uniclass

Ss_30_42_54_75 Resin flooring systemsPrimary

NATSPEC National Classification System

0657 Resin Based Seamless Flooring

SpeedSpec

03365 Concrete Finishes

SpecPack

07180 Traffic Coatings

Product range

Deckshield Car Park Coatings

Specification data - Resin flooring systems

Substrate preparation

-

Manufacturer guidance

Concrete should be finished by steel trowel. Surface preparation is to be completed by totally enclosed light shot blasting (please note this may leave track and blast lines which will not be covered) or diamond grinding to a minimum CSP2 prior to any coating application. For proper methods, refer to ICRI’s Technical Guideline No. 03732. Any damaged areas must be repaired with Flowtex F1 mortar.

Primer

Flowprime AU.

Manufacturer guidance

Primer is only required for porous substrates.

Resin coating

Deckcoat EP.

Manufacturer guidance

Applied in two coats. Follow manufacturer's instructions for application.

Broadcast aggregate

Broadcast Non-slip aggregate onto the cured Deckcoat EP.

Guidance for specification option:

Application based on 60 Mesh White Aluminium Oxide.

Colour

Bluebell.

Bridge Grey.

Dark Grey.

Light Grey Blue.

Light Grey.

Show more

Manufacturer guidance

Applicators responsibility to verify accuracy of colour prior to application. Refer to manufacturers' data sheets and instructions.

Nominal thickness

0.35 - 1 mm.

Finish:

Smooth gloss finish.

Light Non Slip gloss finish.

Non-slip gloss finish.

Non-slip tyre squeal reduction.

Manufacturer guidance

Thickness in 0.35 mm.

Slip resistance

P3 (Based on 60 Mesh White Aluminium Oxide Aggregate).

P5 (Based on 46 Mesh White Aluminium Oxide Aggregate).

Manufacturer guidance

Slip resistance as per method described in AS 4586.

Cure speed

Foot traffic curing between 18 to 48 hours.

Full chemical cure between 6 to 12 days.

Vehicular traffic between 48 hours to 96 hours.

Manufacturer guidance

The cure time depends on the ambient temperature. Check and verify with the manufacturer.

Coving

-

Manufacturer guidance

Coving can form an integral part of the flooring system, creating a sealed finish between the floor and wall joint. To refer to Flowtex F1 Coving Mortar for further information.

Fire performance

Tested to AS/ISO 9239.1

Fire resistance

Smoke value 5% (Mean).

VOC content

Less than 140 g/L.

Sustainability data

Country of product manufacture

Australia

Literature

Deckcoat EP Non Slip

Deckcoat EP Non Slip

Deckcoat EP Non Slip 1mm

Deckcoat EP Non Slip 1mm

Deckshield Brochure

Deckshield Brochure

Case studies

Waterproof Deck Coating Solution for Gawler Place

Waterproof Deck Coating Solution for Gawler Place