Verified by manufacturer over a year ago
AWTA Test results
Certificate type
Anti-static resin-based flooring system
Typically used in sensitive environments such as electronic, laboratory, defense and clean room environments.
An anti-static, hard-wearing, abrasion resistant, self-smoothing gloss finish resin flooring system.
Material | Resin |
Warranty description | Manufacturer guidanceCheck with manufacturer for details. |
Uniclass | |
NATSPEC National Classification System | 0657 Resin Based Seamless Flooring |
SpecPack | 03360 Concrete Finishes |
SpeedSpec | 03365 Concrete Finishes |
Product range |
Substrate preparation | Manufacturer guidanceConcrete should be finished by steel trowel. Surface preparation is to be completed by totally enclosed light shot blasting (please note this may leave track and blast lines which will not be covered) or diamond grinding to a minimum CSP3 prior to any coating application. For proper methods, refer to ICRI’s Technical Guideline No. 03732. |
Standard | To AS 4586. Guidance for specification option: Slip resistance in accordance to AS 4586. |
Primer | Flowprime AU with Conductive grid of 12mm wide conductive tape Manufacturer guidancePrimer second coat is only required for porous substrates. Check with manufacturer for detailed application instructions. |
Resin coating | Flowprime ESD. Manufacturer guidanceFor detailed application and instructions, check with the manufacturer. |
Sealer coat | Flowshield ESD Conductive. Manufacturer guidanceFor detailed application and instructions, check with the manufacturer. |
Colour | Bluebell. Brirge Grey. Dark Grey. Light Grey Blue. Light Grey. Manufacturer guidanceApplicators responsibility to verify accuracy of colour prior to application. Refer to manufacturers' data sheets and instructions. |
Finish: | Gloss. |
NominalThickness | 2 mm. |
Slip resistance | P1. Manufacturer guidanceSlip resistance method described in AS 4586. |
Coving | Manufacturer guidanceWhere coving is required specify details. Recommended coving option is Flowtex F1 coving mortar. Check with manufacturer for further instructions. |
Curing time | Foot traffic curing between 12 to 36 hours. Full chemical cure between 6 to 10 days. Vehicular traffic between 24 hours to 72 hours. Manufacturer guidanceCure time depends on the ambient temperature. Check and verify with the manufacturer. |
Fire performance | Tested to AS/ISO 9239.1 |
Fire resistance | Critical Heat Flux value 6.6 kW/m². Smoke value 398% (Mean). |
Anti static layer | Manufacturer guidanceA network of 12 mm wide, self-adhesive, conductive copper tape is always recommended in combination with any Flowcrete antistatic flooring system. The copper tape must be applied directly onto the cured Flowprime AU, maximum 1 metre in from the perimeter of the application. Further, strips of tape should be applied within this area every 3 metres. Special attention should be paid to tape areas passing over expansion or bay joints to ensure permanent electrical continuity. |
Country of product manufacture | Australia |