NBS Source
I'm a manufacturer
Compare variants

Flowcoat Terrosso

Verified by manufacturer over a year ago

Flowcoat Terrosso (Light Non-slip Gloss)

Flowcrete Variant:
Third party certifications:
  • AWTA Test results

    Certificate type

Epoxy resin-based flooring sytem featuring decorative acrylic flake blends.

Jump to:
1800 318 038 Website

Application

  • Ideal for dry process areas, public areas, shops, showrooms, department stores, designer outlets, restaurants, garden centres, airports, schools and hospitals.
  • Well suited for commercial applications.

Description

An epoxy resin-based floor system with decorative coloured acrylic flake blends scattered over a pigmented epoxy base coat and finished with a tough resistant clear sealer.


  • Slip-resistant.
  • Hard-wearing and durable.
  • Abrasion and chemical resistant protective coating.
  • Easy to apply and low maintenance.
  • Low VOC at 28 g/L.
  • Non-hazardous to health and the environment.
  • Seamless, hygienic finish.
  • Available in bespoke colours.

General information

Color

-

Manufacturer guidance

For a full colours chart and samples, Contact manufacturer.

Finish

Epoxy

Gloss

Satin

Anti-slip

Material

Resin

Warranty description

-

Manufacturer guidance

Guaranteed against defective materials and manufacture. Subject to Flowcrete standard ‘Warranty, Terms and Conditions of Sale. Check with manufacturer for details.

Uniclass

Ss_30_42_54_75 Resin flooring systemsPrimary

NATSPEC National Classification System

0657 Resin Based Seamless Flooring

SpecPack

09400 Terrazzo

SpeedSpec

03365 Concrete Finishes

Product range

Commercial Flooring

Specification data - Resin flooring systems

Substrate preparation

-

Manufacturer guidance

Concrete should be finished by steel trowel. Surface preparation is to be completed by totally enclosed light shot blasting (please note this may leave track and blast lines which will not be covered) or diamond grinding to a minimum CSP2 prior to any coating application. For proper methods, refer to ICRI’s Technical Guideline No.03732.

Standard

To AS/ISO 9239.1 and AS 4586.

Primer

Flowcoat OP.

Resin coating

Flowcoat OP.

Aggregate

60 Mesh White Aluminium Oxide.

Sealer

Flowseal UV.

Deckshield UV WB

Flowtex Sealer.

Colour

Asteroid

Galaxy.

Milky Way.

Moon.

Nebula.

Show more

Finish:

Light Non-slip Gloss.

NominalThickness

1.5 mm.

Slip resistance

-

Manufacturer guidance

Slip resistance method described in AS 4586.

Coving

-

Manufacturer guidance

Coving can form an integral part of the flooring system. It creates a sealed finish between the floor and wall joint. Please refer to Flowtex F1 Coving Mortar for further information.

Curing

Foot traffic curing between 18 to 48 hours.

Manufacturer guidance

Cure time depends on the ambient temperature. Check and

verify with the manufacturer.

Fire performance

Tested to AS/ISO 9239.1

Fire resistance

Critical Heat Flux value and Heat Flux - 30 minutes value @ -kW/m². Smokevalue @ 19% (Mean).

VOC content

Less than 140 g/L.

Sustainability data

Country of product manufacture

Malaysia

Third party certifications

AWTA Test results

AWTA Test results

Flowcoat Terrosso AWTA Fire Test

AWTA Test results

AWTA Test results

Flowfast Terrosso AWTA Fire Test

Case studies

Ready to Set Sail at the Brisbane International Cruise Terminal

Ready to Set Sail at the Brisbane International Cruise Terminal