Flowcoat OP
Verified by manufacturer over a year ago
Flowcoat OP Smooth Finish
Flowcoat OP Smooth Finish
AWTA Test results
Certificate type
Epoxy resin-based floor coating system
Application
- Typically used as a hard wearing, protective, coloured floor coating in industrial facilities.
- Can be used as a stand-alone coating or as part of Flowcrete’s resin flooring systems.
- Used as a protective coloured floor coating in areas such as factories, warehouse, plants and storage rooms.
Description
A high performance, low VOC, epoxy resin coating system designed to create a uniform “Orange Peel” surface texture.
- Slip resistant.
- Hard-wearing and durable.
- Abrasion and chemical resistant protective coating.
- Easy to apply and low maintenance.
- Low VOC at 28 g/L.
- Non hazardous to health and environment.
- Seamless, hygienic finish.
General information
Finish | Epoxy |
Material | Epoxy resin |
Warranty description | Manufacturer guidanceCheck with manufacturer for details. |
Uniclass | |
NATSPEC National Classification System | 0657 Resin Based Seamless Flooring |
SpeedSpec | 03365 Concrete Finishes |
SpecPack | 03360 Concrete Finishes |
Product range |
Specification data - Resin flooring systems
Substrate preparation | Manufacturer guidanceConcrete should be finished by steel trowel. Surface preparation is to be completed by totally enclosed light shot blasting (please note this may leave track and blast lines which will not be covered) or diamond grinding to a minimum CSP2 prior to any coating application. For proper methods, refer to ICRI’s Technical Guideline No. 03732. Any damaged areas must be repaired with Flowtex F1 mortar. |
Standard | To AS/ISO 9239.1 and AS 4586. |
Primer | Flowprime AU. Manufacturer guidancePrimer is only required for porous substrates. |
Resin coating | Flowcoat OP. |
Colour | Bluebell. Bridge Grey. Dark Grey. Light Grey Blue. Light Grey. Manufacturer guidanceApplicators responsibility to verify accuracy of colour prior to application. Refer to manufacturers' data sheets and instructions. |
Finish: | Gloss smooth finish |
NominalThickness | 0.3 mm. |
Slip resistance | P1. Manufacturer guidanceSlip resistance method described in AS 4586. |
Coving | Manufacturer guidanceCoving can form an integral part of the flooring system. It creates a sealed finish between the floor and wall joint. To refer to Flowtex F1 Coving Mortar for further information. |
Curing time | Foot traffic curing between 18 to 48 hours. Full chemical cure between 6 to 12 days. Vehicular traffic between 48 hours to 96 hours. Manufacturer guidanceCure time depends on the ambient temperature. Check and verify with the manufacturer. |
Fire performance | Tested to AS/ISO 9239.1 |
Fire resistance | Critical Heat Flux value - kW/m2. Smoke value 5%(Mean) |
VOC content | Less than 140 g/L. Manufacturer guidanceCompliant with Green Star Design & As Built V1.2-13.1.1B, Green Star Interiors V1.2-12.1.1B. |
Sustainability data
Country of product manufacture | Australia |
Third party certifications
AWTA Test results
Flowcoat OP Deckcoat EP AWTA Fire Test
Literature
Flowcoat OP Light Non Slip
Flowcoat OP Non Slip
Flowcoat OP Smooth
Industrial Brochure