NBS Source
I'm a manufacturer
NBS Source
Compare variants

Centerfold 80 GV (Folding Sliding Wall Hardware) - Sliding Wall

Verified by manufacturer 9 days ago

16786

Hawa Sliding Solutions AG Variant:
Product certifications:
  • EPD

    EPD

    Certificate type

Centre-folding hardware for all-glass concertina walls with panel weights up to 80 kg.

Jump to:
+41 44 787 17 17 Website

Application

Suitable for residential and commercial settings, including:

  • Shopping centres.
  • Restaurants.
  • Airports.
  • Hotels.
  • Banks.

Description

Centre-folding hardware for all-glass concertina walls without a bottom guide channel, for panel weights up to 80 kg.


Features and benefits:

  • Elegant design.
  • Panel width: 500–900 mm.
  • Maximum panel height: 2600 mm.
  • Suitable for door panel thickness of 10–12.7 mm.
  • Left and right-handed configurations, as well as inwards or outwards-opening installations can all be achieved using the same components.
  • Smooth, quiet operation.
  • Minimal stacking space required.
  • Includes a secure locking mechanism.
  • Attached to every other panel is a folding (pivot) door catch with an integrated, individually adjustable retainer, to hold the centre fold wall flush when closed without operating a locking mechanism.
  • An access door equipped with our top pivot may also be added on the opposite side to the folding stack.
  • Compatible for use with sliding doors: Fully tempered monolithic glass (of 8, 10, 12 and 12.7 mm thickness) and fully tempered laminated glass, and fixed doors: Fully tempered monolithic glass (of 8, 12 and 12.7 mm thickness) and fully tempered laminated glass (of 10.8–13 mm thickness).
  • Has mid-point panel suspension, which means that the installation does not require a bottom guide channel up to six and a half panels.
  • All mechanisms, suspension devices, guides and locks are fully integrated into the aesthetically pleasing suspension and glass retainer profiles.
  • Vertical adjustment (±3 mm).


Components:

Quantities of each component will vary dependent on variant specified, consult manufacturer for details.

  • Four-wheeled trolley M10, with plastic wheels.
  • Four-wheeled trolley M10, with plastic wheels and spacer.
  • Top pivot bearing.
  • Vertically adjustable driver for pivot door.
  • End stop.
  • Folding/ pivot door catch (adjustable).
  • Hawa bar bolt lock, square/ hexagon socket 7/ 8 mm, complete with pivot (standard).
  • Vertical adjustment key SW 19.
  • Suspension assembly locking wrench SW 10/11.
  • Fork spanner SW 22/12, pivot door vertical adjustment.

General information

Color

Grey

Finish

Anodized

Chrome

Guidance for specification option:

Dull chromium finish.

Material

Aluminium

Zinc

Shape

Rectangle

Length

6500 mm

Height

2600 mm

Warranty description

Two year

Uniclass

Pr_30_36_36_23 Door track and running gearPrimary

CAWS

P21/10 Door track and running gear

P21/350 Door track and running gear

SKU Code

16786, 16787, 16788, 16789, 16790, 16791, 16792, 16793, 16794, 16795

GTIN/EAN

7612983061119

Specification data - Door track and running gear

Classification data

Standard

To EN 1527:1998.

Third party certification

LGA Qualitätszertifikat.

Classification grades (minimum)

-

Durability

6.

Door mass

2.

Initial friction

3.

Form

Aluminium, plain anodized, pre-drilled, sliding, stacking, centre folding running track and bottom guide channel.

Running track

6000 mm.
Cut to size.

Guidance for specification option:

Insert requirements.

Bottom guide channel

6000 mm.
Cut to size.

Guidance for specification option:

Insert requirements.

Manufacturer guidance

Pre-drilled, 31 x 28 mm.

Suspension/ Retainer profile

Aluminium, plain anodized, brushed.
Aluminium, plain anodized, brushed (straight).
Aluminium, un-anodized.

Length

6500 mm.
Cut to size.

Guidance for specification option:

Insert requirements.

Manufacturer guidance

Suspension/ retainer profile.

Hinges

Zinc alloy, dull chromium finish.
Zinc alloy, dull chromium finish (straight).
Zinc alloy, raw finish.

Locking

Hawa bar bolt lock with retention pin, 17 mm profile cylinder.

Guidance for specification option:

  • On request.
  • Available with floor mounted sleeve or strike plate, insert requirements.

Hawa bar bolt lock with retention pin, 22 mm round cylinder.

Guidance for specification option:

  • On request.
  • Available with floor mounted sleeve or strike plate, insert requirements.

Hawa bar bolt lock, square/ hexagon socket 7/ 8 mm, complete with pivot.

Guidance for specification option:

  • Standard.
  • Available with floor mounted sleeve or strike plate, insert requirements.

Manufacturer guidance

Various accessories are available, consult manufacturer for details.

Accessories/ Other requirements

Not required.
Additional top lock.
Brush seal for glass suspension and retainer profile.
Cover cap.

Guidance for specification option:

  • Available in dull chromium or raw finish.
  • Insert requirement.

Drilling jig, for hinge retention bolts.
Fork spanner to glass holder insert.
Glass cutouts.

Guidance for specification option:

Various configurations available, consult manufacturer's literature and insert requirements.

Guide with plastic slider, rattle proof, 14 mm, and suspension block.
Installation tool for blocking keys.

Guidance for specification option:

For 10–12.7 mm glass.

Long connecting rod.

Guidance for specification option:

For door heights over 2500 mm.

Set of glass fixing parts.
Short connecting rod.

Guidance for specification option:

For door heights up to 2500 mm.

Surface treatment of suspension and glass retainer profiles.
Thrust bearing.

Guidance for specification option:

For fitting into bottom guide channel.

Thrust bearing sleeve.

Guidance for specification option:

For pivot door.

Manufacturer guidance

Other accessories and spares are also available, consult manufacturer for details.

Maximum width per module

1400 mm.

Panels

Set for 1½ panels.

Sustainability data

Contains Red List materials

No

Country of material origin

Switzerland

Country of product manufacture

Switzerland

Material

Aluminium
Zinc

Recyclability

Yes

Product certifications

Product certifications

EPD

EPD

Hawa EPD Glass door gear EN

Literature

CAT_EN_Hawa_Centerfold_80_GV

CAT_EN_Hawa_Centerfold_80_GV

Similar products from Hawa Sliding Solutions AG

Aperto 60 H (Sliding Wall Partition Gear Hardware) - Sliding Wall

Aperto 60 H (Sliding Wall Partition Gear Hardware) - Sliding Wall

Banio 40 GF (Shower Enclosure Hardware) - Shower

Banio 40 GF (Shower Enclosure Hardware) - Shower

Centerfold 80 H (Folding Sliding Wall Hardware) - Sliding Wall

Centerfold 80 H (Folding Sliding Wall Hardware) - Sliding Wall

Concepta 40/ 50 (Pivot Sliding Furniture Hardware) - Pivot Pocket Doors

Concepta 40/ 50 (Pivot Sliding Furniture Hardware) - Pivot Pocket Doors

Concepta III 25 Pull (Pivot Sliding Furniture Hardware) - Pivot Door

Concepta III 25 Pull (Pivot Sliding Furniture Hardware) - Pivot Door

Concepta III 25 Push (Pivot Sliding Furniture Hardware) - Pivot Doors

Concepta III 25 Push (Pivot Sliding Furniture Hardware) - Pivot Doors

Concepta III 35 Pull (Pivot Sliding Furniture Hardware) - Pivot Door

Concepta III 35 Pull (Pivot Sliding Furniture Hardware) - Pivot Door

Concepta III 35 Push (Pivot Sliding Furniture Hardware)

Concepta III 35 Push (Pivot Sliding Furniture Hardware)

Folding Concepta III 20 Pull - Door Furniture

Folding Concepta III 20 Pull - Door Furniture

Folding Concepta III 20 Push - Pivot Folding Pocket Doors

Folding Concepta III 20 Push - Pivot Folding Pocket Doors

© 2026 Hubexo North UK Ltd. All rights reserved.