The EdgeReil™ A Frame system is a combined track and davit product, manufactured from interlocking structural aluminium sections, with connecting 316 stainless steel bearing-based travellers. With options to ‘free wheel’ or manually lift and lock in position, the time required to access a facade is significantly reduced compared to socketed davits.

The height of the A Frame can be varied to ensure the system provides clearances above the parapet to prevent the need to include service or factored load requirements in the building design.

The wheeled version requires either a membrane or paver roof finish, whilst the manual can be used with green and ballast type roofs. With 6 m fixing centres the system can be lower cost than conventional davit sockets but with lower ongoing LOLER and cleaning or maintenance costs.

Features and benefits:

Faster to operate than posts or sockets.
Continuous vertical and horizontal access.
Third-party approved and tested.
Two user tested - 21 kN rated.
Safer rope deviation.
Reduced forces to the roof.
Flexible design to suit any building layout.
The product is suitable for personnel and materials, lifting and lowering.
SATRA tested to BS 8610:2017 and with a safe working load of 600 kg.
30 year warranty available with Sayfa+.
EdgeReil™ is typically supplied to project specific requirements and pre-assembled for quick and easy installation on site.
The EdgeReil™ removable Davit shoulder or boom ensures the system can be installed with low visual impact from above or below the roof.

SATRA EdgeReil™ Rail Cantilever Test Report - BS 8610.2017 3U