Rectangular EIS fire damper with a fire resistance of 30, 60, 90 or 120 minutes depending on the installation type, for motorized and non-motorized applications.

(previously known as FD or FSD / MFSD)

CU-LT Distinct Product Features (incl. specifications)

CE certified against EN 1366-2 and EN 15650.
UKCA certified.
i <-> o certified.
Air-tightness class C against EN 1751.
Up to 500 Pa pressure level (standard 300 Pa).
Hygiene certified.
Swedish BVD and SundaHus rating in place.
Minimal distance certified against EN 1366-2.
Single, thin insulated damper blade.
No mechanics inside the damper body.
Fusible link aligned with the open damper blade.
72°C fusible link temperature threshold.
Support lugs aligned to DW145 guidance.
Designed for use with Belimo motor range (24/ 230 V).
Designed for use with ONE motor range (24/ 230 V).
Designed for use with ONE-X and ZENiX.
Note for clarification:
ONE is a motor by Rf-Technologies.
ONE-X is motor with an integrated control module, used in combination with the ZENiX controls solution by Rf-Technologies.

CU-LT user benefits:

Minimal impact on building space requirements thanks to the minimal distance CE certification and the compact damper and mechanics design
down to 25/50 mm vs. structure (floor/ceiling/adjacent wall) or 50 mm between dampers (instead of 75/200 mm standard CE).
Minimal pressure loss in the damper body and ventilation system
ultimately leading to lower system investments and energy consumption.
Minimal acoustic / noise impact.
Lowest standby power consumption in the market when using the ONE motor.
Easy installation and maintenance (compared to traditional UK type fire dampers).

CU-LT range:

Width x Height (mm) 200 x 100 to 800 x 600.
Tunnel casing (mm) 300 or 500.

CU-LT configurations & options:

Inspection opening on the damper body to allow access to the internal components of the fire damper (option UL).
Pre-mounted installation kit for easy installation in flexible wall (option IFW).
Circular connection flange with rubber sealing ring (option PRJ) (supersedes the default rectangular connection flange PG20).

Notes:

For information about the different types of installation and sealing methods please consult the CU-LT Product application field and/or the CU-LT Declaration of Performance (DoP) and technical documentation.

CU-LT Hygiene Certificate