NBS Source
List your products

fire protection

9,528 results found

Sort by:

Showing 181-216 of 6589

MxPro 5 Fire Alarm Control Panel 1 Loop

Advanced Electronics Ltd

Features and benefits:

  • EN54 Part 2, 4 and 13 Approved.
  • Certified by FM Approvals to EN 54 Parts 2 and 4.
  • Single loop.
  • Small enclosure.
  • Maximum 7Ah internal batteries.
  • 20 programmable LED’s.
  • Optional programmable key switch.
  • Programmable Input.
  • Medium, Large and Deep enclosure options.
  • Compatible with Alarm Calm false alarm management.

MxPro 4 Remote Terminal Fire Alarm Control Terminal

Advanced Electronics Ltd

Based around two core products, the MxPro 4 Remote Display Terminal (RDT) and the fully functional MxPro 4 Remote Control Terminal (RCT), both utilise the same graphical LCD user interface that can be found on the MxPro 4 series fire panels and are based upon the same advanced, flash based, microprocessor technology.

All MxPro 4 series panels and remote terminals can communicate over the same 2-core network cable.

Integral network interface incorporating a special screen termination to prevent mains frequency earth-loop currents flowing between network nodes.

The 'Ad-NeT' network operates as a true peer-to-peer system with full cross panel reporting, control and cause and effect functionality of up to 1000 zones.

Features:

  • The display information is fully programmable by individual zone or sector and can display any combination of fires, faults, pre-alarms or plant alarms. E.g. can display all information in its own sector, but can only show fire signals from other sectors of a building.
  • Both remote terminals incorporate buzzer mute, view, enable/disable and test facilities with a dedicated system and navigation keys for simple user control.
  • Fully on-site programmable via onboard alphanumeric keypad or PC configuration tools.
  • The RCT has additional sector based control keys for Evacuate, Silence, Resound and Reset, which allows other networked panels to selectively respond to controls as programmed. E.g. on a site with multiple buildings, a user may be allowed to silence and reset fires originating in their own building. Fires originating from other buildings are displayed but cannot be reset.
  • By using flash memory and an advanced graphical display the remote terminals can be easily configured to operate in virtually any language, with any character set and allows for the installer’s logo and company details to be displayed on the LCD display during normal operation.

MxPro 4 Remote Terminal Fire Alarm Display Terminal

Advanced Electronics Ltd

Based around two core products, the MxPro 4 Remote Display Terminal (RDT) and the fully functional MxPro 4 Remote Control Terminal (RCT), both utilise the same graphical LCD user interface that can be found on the MxPro 4 series fire panels and are based upon the same advanced, flash based, microprocessor technology.

All MxPro 4 series panels and remote terminals can communicate over the same 2-core network cable.

Integral network interface incorporating a special screen termination to prevent mains frequency earth-loop currents flowing between network nodes.

The 'Ad-NeT' network operates as a true peer-to-peer system with full cross panel reporting, control and cause and effect functionality of up to 1000 zones.

Features:

  • The display information is fully programmable by individual zone or sector and can display any combination of fires, faults, pre-alarms or plant alarms. E.g. can display all information in its own sector, but can only show fire signals from other sectors of a building.
  • Both remote terminals incorporate buzzer mute, view, enable/disable and test facilities with a dedicated system and navigation keys for simple user control.
  • Fully on-site programmable via onboard alphanumeric keypad or PC configuration tools.
  • The RCT has additional sector based control keys for Evacuate, Silence, Resound and Reset, which allows other networked panels to selectively respond to controls as programmed. E.g. on a site with multiple buildings, a user may be allowed to silence and reset fires originating in their own building. Fires originating from other buildings are displayed but cannot be reset.
  • By using flash memory and an advanced graphical display the remote terminals can be easily configured to operate in virtually any language, with any character set and allows for the installer’s logo and company details to be displayed on the LCD display during normal operation.

MxPro 4 Fire Alarm Control Panel 1 Loop

Advanced Electronics Ltd

The MxPro 4 comes fitted complete with an internal loop driver card (Apollo/Hochiki only) and 2 onboard sounder circuits. The control panel consists of a simple to use LCD menu driven graphical interface, dual, flash-based microprocessor technology driven by an onboard 24V DC, 2 Amp high efficiency switched mode power supply and charger approved to EN54 parts 2 & 4.

Dedicated system navigation keys make this control panel user-friendly as well as installer friendly due to the uncomplicated, trouble-free, commissioning and fault finding.

Powerful cause and effect programming coupled with dynamic zoning makes the panel suitable for a wide range of site applications, from small to large complex multi-area systems. Fully on-site programmable via on board alphanumeric
keypad or PC-NeT configuration tools.

An extensive suite of PC based, software programs have been developed to supplement the MxPro 4 series fire panels.

Features:

  • Full support of Apollo (Discovery, Xplorer S90 & XP95), Hochiki ESP protocols.
  • Advanced graphical LCD user interface with up to 250 fire zones as standard, allowing full EN54 compliance without additional hardware or LED indication.
  • Dedicated RS232 serial port for direct PC or modem connection.
  • Installer friendly auto-learn and loop detection facility for uncomplicated, trouble-free, commissioning and fault finding.
  • Fully on-site programmable via onboard alphanumeric keypad or PC configuration tools.
  • Flash memory and the advanced graphical display enables the panels to be configured to operate in virtually any language with any character set and allows the installer's logo and company details to be applied to the LCD display.
  • Robust, removable equipment chassis with plug-in connectors for simple fixing and cable termination.
  • When connected to the fault tolerant Ad-NeT network, the panel operates as a true peer-to-peer interface with full cross-panel reporting, control and cause-and-effect functionality.

STX RANGE - Fire system power supply

Elmdene International Ltd

Switch Mode power supplies specifically designed for EN54 compliant Fire System Installations.

The units include intelligent battery charging using Elmdene’s efficient EcoCharge technology, possess mains and battery monitoring with independent voltfree outputs and also feature battery deep discharge protection in the event of a prolonged mains failure. The inclusion of LED indicators provides quick diagnostics of the status of the power supply, while a variety of enclosures offer the installer a choice of standby battery backup options.

Available in either 1A, 2A, 5A or 10A versions they are certified to EN54-4:1997, A1:2002 & A2:2006.

Features and benefits:

  • 27.6V dc output.
  • Cost effective switch mode technology.
  • Energy efficient.
  • Intelligent battery charging and monitoring using Elmdene’s EcoCharge technology.
  • Deep Discharge Protection.
  • Remote fault signalling.
  • Full rated current to load plus additional current for battery charging.
  • LED indication:
    – Mains status.
    – Output fault.
    – Battery fault.
    – Charger fault
  • Volt-free fault output - EPS:
    – Mains fail.
  • Volt-free fault output - PSU fault:
    – Battery fault.
    – Charger fault.
    – Loss of output.
  • Mains transient protection.
  • 10A version can charge up to 2 x 65Ah batteries housed in a separate enclosure (BATT-BOX-65).

MxPro 5 Fire Alarm Control Panel 2-8 Loop

Advanced Electronics Ltd

Features and benefits:

  • EN54 Part 2, 4 and 13 Approved.
  • Certified by FM Approvals to EN 54 Parts 2 and 4.
  • Two to eight loops.
  • Extended enclosure.
  • Maximum 45Ah internal batteries.
  • Up to 200 additional programmable LED’s, 2 x switch cards or mimic.
  • Up to 8 programmable key switches or 4 plus printer.
  • Plexi-glass door and external battery box option.

MxPro 5 Fire Alarm Control Panel 1-4 Loop

Advanced Electronics Ltd

Features and benefits:

  • EN54 Part 2, 4 and 13 Approved.
  • Certified by FM Approvals to EN 54 Parts 2 and 4.
  • One to four loops.
  • Large enclosure.
  • Maximum 17Ah internal batteries.
  • Up to 200 additional programmable LED’s.
  • Up to 8 programmable key switches or 4 plus printer.
  • Plexi-glass door option.
  • Deep and Extended enclosure options.

MxPro 4 Fire Alarm Control Panel 2-8 Loop

Advanced Electronics Ltd

The MxPro 4 series is fully expandable from 2 to 8 loops complete with 8 onboard sounder circuits. The control panel consists of a simple to use LCD menu driven graphical interface, dual, flash-based microprocessor technology driven by a 5 Amp power supply and charger approved to EN54 parts 2 & 4.

Dedicated system navigation keys make learning this control panel user-friendly as well as installer friendly due to the uncomplicated, trouble free, commissioning and fault finding.

Powerful Cause and Effect programming coupled with dynamic zoning make the panel suitable for a wide range of site applications, from small to large complex multi area systems. Fully on site programmable via on board alphanumeric keypad or PC-NeT Configuration tools.

An extensive suite of PC based software programs has been developed to supplement the MxPro 4 series Fire panels.

Features:

  • Robust, removable equipment chassis with plug-in connectors for simple fixing and cable termination.
  • Advanced graphical LCD user interfaces with up to 1000 fire zones as standard, allowing full EN54 compliance without additional hardware or LED indication.
  • 2 x 5 Amp power supply and charger to EN54 part 4.
  • Dedicated RS232 serial port for direct PC or modem connection.
  • Installer friendly Auto-learn and Loop Detection facility for trouble-free, commissioning. Fully on-site programmable via onboard alphanumeric keypad or PC configuration tools.
  • The graphical display enables the panels to be configured to operate in virtually any language with any character set and allows the installer's logo and company details to be applied to the LCD display.
  • Ad-NeT network with up to 1000 zones.

MxPro 4 Fire Alarm Control Panel 1-2 Loop

Advanced Electronics Ltd

The MxPro 4 series is fully expandable from 1 to 2 loops complete with 2 onboard sounder circuits. The control panel consists of a simple to use LCD menu driven graphical interface, dual, flash based micro processor technology driven by a 4 Amp power supply and charger approved to EN54 parts 2 & 4.

Dedicated system navigation keys make this control panel user and installer friendly due to the uncomplicated, trouble free, commissioning and fault-finding.

Powerful cause and effect programming coupled with dynamic zoning makes the panel suitable for a wide range of site applications, from small to large complex multi-area systems. Fully on site programmable via onboard alphanumeric keypad or PC-NeT Configuration tools.

An extensive suite of PC based, software programs have been developed to supplement the MxPro 4 series fire panels.

Features:

  • Fully expandable from 1 to 2 loops via common plug in loop driver boards.
  • Full support of Apollo (Discovery, Xplorer S90 & XP95), Hochiki ESP, Nittan Evolution and AV protocol.
  • Advanced graphical LCD user interfaces with up to 1000 fire zones as standard, allowing full EN54 compliance without additional hardware or LED indication.
  • 4 Amp power supply and charger to EN54 part 4.
  • Dedicated RS232 serial port for direct PC or modem connection.
  • Dual, flash based, microprocessor technology with onboard Real Time Clock. Optional onboard or remote printer.
  • Installer friendly Auto-learn and Loop Detection facility for troublefree, commissioning. Fully on-site programmable via on-board alphanumeric keypad or PC configuration tools.
  • Flash memory and the advanced graphical display enables the panels to be configured to operate in virtually any language with any character set and allows the installer's logo and company details to be applied to the LCD display.
  • Robust, removable equipment chassis with plug-in connectors for simple fixing and cable termination.
  • When connected to the fault tolerant Ad-NeT network, the panel operates as a true peer-to-peer interface (with up to 1000 shared zones) with full cross panel reporting, control functionality.

MxPro 5 Fire Alarm Control Panel 1-2 Loop

Advanced Electronics Ltd

Features and benefits:

  • EN54 Part 2, 4 and 13 Approved.
  • Certified by FM Approvals to EN 54 Parts 2 and 4.
  • One or two loops.
  • Medium enclosure.
  • Maximum 12Ah internal batteries.
  • Up to 50 additional programmable LED’s.
  • Up to 8 programmable key switches or 4 plus printer.
  • Plexi-glass door option.
  • Large and Deep enclosure options.

FireMaster® A1

Coopers Fire Ltd

An electrically operated active fire curtain barrier assembly used to form a virtually continuous barrier as a fire separating element.

Showing 181-216 of 6589

Feedback