"kent stainless"
5,020 results found
Relevance
Showing 577-612 of 709
Rainwater Vandal Range
Lindab Ltd
Our range of vandal products is used in high traffic areas as it is harder to damage. It is made with 2mm hot-dip galvanised steel or 1.5mm stainless steel plate. This can be used with our standard rainline products but needs to be connected with a BUTK drain shoe.
Masonry Support Systems and Lintels
Leviat
Masonry cladding on steel or concrete framed structures is normally supported by stainless steel support systems.
Frame type, differential movement, type of cladding, masonry load and cavity width all need to be considered when designing the most appropriate fixing solution.
Channel and Bolt Fixings
Leviat
There are various methods of fixing stainless steel masonry supports, restraints and windposts to either concrete or steel frames.
The selection of the most appropriate method will depend on many factors including fixing centres, edge distances, type of fixture, loading and the site adjustment required.
Corner Guards
Leviat
Corner Guards offer protection to exposed edges of columns and walls in areas of high traffic such as car parks, warehouses, hospitals etc.
Ancon manufactures corner guards in a standard length of 1250mm in either stainless steel, galvanised steel or untreated mild steel.
06 - Safety made of metal mesh Systems - GKD Creative Weave - Balustrades, roller shutter and fall guard protections
GKD - GEBR. KUFFERATH AG
GKD Creative Weave has been leading the market in technical woven mesh and stainless steel fabrics. Using this knowledge GKD has produced a Balustrade system that allows the transparent, robust, and secure nature of stainless steel woven mesh to create a durable and virtually maintenance free balustrading solution.
This solution is built with a standard fixing system used in the balustrading industry allowing it to be installed with ease and convenience. This system also makes it a perfect product for replacing old and dated balustrade systems. With a choice a of four different mesh types the GKD Balustrading system can be integrated into a wide variety of designs and concepts.
Wall Mounted Emergency Eyewash, exposed piping TDS
BROEN-LAB
Eye/Face shower with two heads in brass with
chemical resistant BROEN-LAB Polycoat and Stainless Steel
bowl. Wall mounted for exposed pipe work. The water
amount is regulated by a built-in FLOWFIX (16 l/min).
Min. working pressure: 1,5 bar.
Floor Access Hatches
Surespan
Our floor access hatches come complete with stainless steel gas spring and hardware. The assisted lift aluminium tread plate or pan type lid locks into the open position with a positive action safety hold-open stay which prevents accidental closure.
GEC Anderson Data Sheet - Sink Bowl: M10 R
Anderson, GEC Ltd
M10 stainless steel inset sink and drainer with integrated drainer recess (sink bowl: 520 x 420 x 200mm; drainer recess: 300 x 440mm). Complete with fixing clamps and basket strainer waste. Overall size 998x500mm.(Right hand bowl).
GEC Anderson Data Sheet - Sink Bowl: M10 L
Anderson, GEC Ltd
M10 stainless steel inset sink and drainer with integrated drainer recess (sink bowl: 520 x 420 x 200mm; drainer recess: 300 x 440mm). Complete with fixing clamps and basket strainer waste. Overall size 998x500mm.(Left hand bowl).
Frame Cramps
Wincro Metal Industries Ltd
Wincro manufacture a comprehensive range of stainless steel frame cramps for fixing to concrete, steel and masonry.
Available with holed or slotted upstands, safety or plain ends, drip indents, twists or wire ends, Wincro can produce a frame cramp to suit any
construction detail.
Fixings For Lead Datasheet
Associated Lead Mills
Provides a selection of fixing clips together with strip, from which fixing clips of the desired size may be cut. Both strips and clips are vailable in copper and stainless steel.
Clips either 0.6 mm gauge copper or 0.4 mm stainless steel are normally recommended.
However when clips are required to be malleable enough to follow complex profiles, only copper clips cab ne used. Steel clips are preferred when the clip can only be fixed at its top extremity and rigidity is required e.g. over a glass roof.
Includes further details on the product, advice on use, lot sizes and product description and properties.
Argus Sensor Barriers and Gates
dormakaba UK & Ireland Ltd
The units of the Argus product family consist of a sensor controlled passageway with automatic doors in different versions. There are two product lines available, depending on how the door wings open. The well proven HSB Sensor Barriers are equipped with swing doors and allow for customised design combinations thanks to a variety of materials and finishes. You can choose between stainless steel housing and transparent side walls matching the design of the entrance area. Moreover the sensor barriers are available in three different lengths. The HSG Sensor Gates are equipped with sliding doors available in different heights. Further features are the premium sensor system and the solid stainless steel housing.
NCCTL Non-Combustible Cavity Tray Lintel
IG Lintels
The IG Non-combustible Cavity Tray Lintel offers a non-combustible stainless steel single leaf lintel with combined cavity tray. This product is A1 fire rated helping specifiers to meet Document B fire safety regulations in buildings over 11 meters in height.
NCCTL Non-Combustible Cavity Tray Lintel
Keystone Lintels Ltd
The Keystone Non-combustible Cavity Tray Lintel offers a non-combustible stainless steel single leaf lintel with combined cavity tray. This product is A1 fire rated helping specifiers to meet Document B fire safety regulations in buildings over 11 meters in height.
ABODE KITCHEN SINKS
Abode (Part of Norcros Group (Holdings) Ltd)
Showcasing a selection of the Abode brand kitchen sink collection. These options have been designed with the developer in mind, especially our versatile Matrix R15 stainless steel sink which can be fit both undermount and low profile inset for a fast fit solution with premium finish.
Gartec MPR Low-up Platform Step Lift – Product Data Sheet
Gartec Platform Lifts
The MPR Low up step lift, is an easy-to-maneuver and
reliable lift with protective edges, roll-off protection and
railing. It is one of our most cost-effective lift solutions that
provides accessibility immediately.
Operated with joystick or a remote control is available as
an option. The standard roll-in width is 715mm, but there
is also a 920mm wide (Part M compliant) platform, with
the mechanically interlocked top gate option chosen this
makes the Low Up suitable and compliant for a public and
commercial environment.
The MPR Low up step lift is galvanized (visible parts are
stainless steel) as standard but can also be hot galvanised,
powder coated in any RAL colour, or a stainless steel
version is available as an option.
GEC Anderson Data Sheet - V90 Shelving
Anderson, GEC Ltd
Technical data sheet for GEC Anderson V90 stepless stainless steel shelving system.
The system comprises uprights, brackets and shelves and can be configured, as required.
Shelf Width: 200, 300, 400 and 500mm
Shelf Length: up to 4000mm
Uprights: 400, 600, 800, 1000, 1500 and 2000mm
ASF Albany 3 Rail Post and Rail
Architectural Street Furnishings part of WB White Foundry
ASF Albany 3 Rail Post and Rail. 100% recycled cast iron post and rail system. Can be used with steel or stainless steel rails, and can be adapted to host panels, meshes or even glass. Ideal parapet or barrier rails for a wide range of applications, commercial, industrial and residential.
Metal Solutions Reveal Panel System
Metal Solutions Limited
The reveal panel system is probably the most popular cladding system for traditional metals, such as copper, brass, bronze, zinc, stainless steel, precoated aluminium or GreenCoat steel.
The reveal panel system is ideally suited to situations where traditional metals are preferred but with a requirement for a flatter appearance than standing seam systems.
INTRAgrille Architectural Grilles
INTRAsystems
INTRAgrille is a superb range of stainless steel, aluminium and carbon steel grilles by INTRAsystems, which provide a stunning architectural finish for both interior and exterior applications.
Advanced production techniques ensure a precise slot and the highest parameters in terms of flatness and straightness to offer you a striking linear appearance for endless design solutions.
Metal Solutions Snow Guard System
Metal Solutions Limited
Snow Guards and ice guards prevent the dangerous movement of snow & ice, on sloping metal roofs, which can cause injury to people, and damage to plants and property below.
All traditional standing seam metal roofs such as copper, brass, bronze, stainless steel, precoated aluminium & GreenCoat steel can be accommodated.
Ancon CCB Cellular Clay Block Wall Ties
Leviat
Ancon has developed an innovative range of wall ties for use with cellular clay blockwork, where the horizontal bed joints are just 1mm. The range includes ties for internal wall junctions and internal/external cavity walls. They are manufactured from corrosion-resistant stainless steel and are suitable for use in housing and commercial applications.
BROEN-LAB CLEANLINE FITTINGS FOR UP TO 6.0 CLEAN GASES
BROEN-LAB
BROEN-LAB CLEANLINE laboratory tapping points incorporate the functions shut-off, pressure regulation and pressure
indication in one compact, ergonomic unit.
BROEN-LAB CLEANLINE valves for 6.0 clean gases can be
used for non-corrosive (brass models) as well as corrosive
(Stainless Steel models) gases and gas mixtures
Freestanding Emergency Body Drench shower with eye/ face shower and bowl, modular
BROEN-LAB
Body shower with eye/face shower and bowl, modular. In brass and SS with
chemical resistant red BROEN-LAB Polycoat with self-draining shower head.
Eye wash with built-in FLOWFIX for regulation of water flow (16 l/min). Bowl in
Stainless Steel with integrated outlet.
Min. working pressure: 1.5 bar.
Shower solutions
Dart Valley Systems Ltd
Ideal for a range of applications including, leisure centres, schools, universities, stadiums and more, shower
panels manufactured from Miranit composite and stainless steel are robust and longer-lasting. With a range of functionalities including electronic and push button options our range of shower panels can provide a solution for almost any washroom environment.
Electroflo Touch Free WC Kit
Thomas Dudley
Touch free infrared WC flushing for use with Dudley Vantage and Miniflo concealed cisterns.
This high quality Touch Free WC Flushing solution is ideal for use in bathroom furniture and behind tiles, partitioning or IPS panelling within domestic or commercial environments.
Available in three finishes, Stainless Steel, Matt Black and Chrome.
1050 Series Heavy-Duty Floor Access Cover
Howe Green
The 1050 Series is a heavy duty stainless steel floor access hatch for internal and external hard floor finishes, including external grade paving slabs. It is specified where a deeper capacity for a thicker floor covering and heavier duty loading is required. The 1050 Series access cover is suitable for up to 6.5 tonne pneumatic tyre wheel load.
The 1050 Series is manufactured from stainless steel with steel base plate and reinforcement and can be supplied as a single, duct or multipart unit. Fire rating options of up to 3 hours for a single cover and 2 hours for duct or multipart covers are available.
The 1050 Series floor access cover from Howe Green provides an access solution that can cope with a demanding location but still look attractive and enhance the public realm.
1. Insect Mesh - Narrow rolls ideal for Soffits & Cladding
The Flyscreen Company Ltd
Standard Insect Mesh is made from woven fibreglass yarn, coated in grey or
black PVC. (Rodent mesh is made from stainless steel)
The 45-50 metre long rolls are available in a range of widths from 50mm to
300mm (see price list for more details).
Stainless Steel meshes are also available. Rolls are 30 metres long, the widths
range from 75mm to 200mm (see below).
In door and window screens Insect Mesh is unobtrusive allowing light and
fresh air into a room with minimal obstruction to the view.
Soffit & Cladding Mesh is specified to keep insects out of the gap between external
cladding and the main building structure, also from soffits and loft spaces;
anywhere that requires a free flow of air without the risk of insects gaining
access.
ICS 5000 flue exhaust chimney and venting system
Schiedel Chimney Systems
ICS 5000 is a multi-functional twin wall insulated venting system, which is suitable for internal and external use on a wide range of engineering, combustion and process equipment, including heating appliances, diesel generators, CHP systems and service ducting.
ICS 5000 comes with a high quality specification as standard with a 316L Grade Stainless steel liner, high performance mineral blanket insulation and a bright annealed 304 Grade stainless steel outer case.
Both liner and outer case have a continuous seam welded joint and each flue gas bearing component has a uniquely profiled spigot and socket joint with bevelled end forms to ensure ease of installation whilst ensuring the joint meets H1 performance criteria at 5000 Pa.
Kunsthalle Mannheim museum of modern and contemporary art:
GKD - GEBR. KUFFERATH AG
Metal fabric as the interface between the inside and outside world.
A shell made of bronze-colored stainless steel fabric from GKD characterizes the new façade of the Kunsthalle Mannheim.
The fabric design developed by GKD especially for the Kunsthalle Mannheim made of bronze-colored cables, wires and tubes builds a sophisticated membran in front of the huge building.
Electroflo Touch Free Urinal Sensor
Thomas Dudley
The Dudley Electroflo Urinal Sensor provides touch free flushing for direct flush urinal systems.
This high quality sensor automatically flushes each individual urinal after use, ensuring the highest level of hygiene from the minimum volume of water.
Available in three high quality finishes, Matt Black, Chrome and Stainless Steel.
Speed Gate - SpeedStile FP BA/EV
Gunnebo Entrance Control
Silent and smooth in operation, this classic Gunnebo Speed lane design is available in the BA version in polyurethane colour finish or with stainless steel cabinets in the EV version, with a selection of top lid materials, side panels and many other customisation options.
Applications include Government, Finance, Banking, Retail, Telecommunications, Information Technology, Publishing, Leisure, Education
BROEN-LAB FLEXIBLE PIPES AND HOSES
BROEN-LAB
BROEN-LAB offers BROEN-LAB UniFlex™ hoses and flexible Stainless Steel pipes as an easy way to make the installation in the laboratory
where safety and efficiency are required. BROEN-LAB UniFlex™ hoses are the ideal solution where there is a higher requirement for flexibility. Installation with flexible hoses saves time and labour - in other words - reduced installation costs
GEC Anderson Data Sheet - Sink Bowl: LM10 R
Anderson, GEC Ltd
LM10 stainless steel inset bowl and a half with integrated drainer recess (main bowl: 340 x 400 x 190mm; half bowl: 148 x 300 x 130mm; drainer recess: 350 x 300mm). Complete with fixing clamps, basket strainer waste and 1 No Ø35mm taphole. Overall size 980x500mm.(Main bowl right).
GEC Anderson Data Sheet - Sink Bowl: LM10 L
Anderson, GEC Ltd
LM10 stainless steel inset bowl and a half with integrated drainer recess (main bowl: 340 x 400 x 190mm; half bowl: 148 x 300 x 130mm; drainer recess: 350 x 300mm). Complete with fixing clamps, basket strainer waste and 1 No Ø35mm taphole. Overall size 980x500mm.(Main bowl left).
Helifix Products and Applications Overview Brochure
Helifix
Helifix is a technically led company with an on-going product development programme backed by thorough independent testing. Having created the original one-piece stainless steel
helical fixing nearly 30 years ago, Helifix became the market leader in the design of specialist helical wall ties, fixings and
masonry repair systems, manufactured at its own UK factory.
Showing 577-612 of 709