"kent stainless"
5,062 results found
Relevance
Showing 541-576 of 703
Unislope 1K Classicline Wet room Kit - Walk in Shower Wet room Kit with Shower Drain - DATA SHEET
WM | Wetroom Materials
Level access wet room system which includes a wall mounted Unidrain, Preformed wetroom tray and wet room waterproofing kit. The Unislope 1K Classicline Stainless Steel Frame and Grate is compatible for both wooden and concrete floors. This Unique wet dec does not crush under weight so can be used for a poured floors and tiles. There are six different brushed stainless steel grating styles to chose from in this range. The Unislope 1K Wetroom Kit comes with 12kgs of waterproofing membrane as standard.
SN9-55 Installation guideline concrete machine screw and rawlnut retro fit.
AATi (Antislip Antiwear Treads International)
Installation guideline to retro fit AATi SN9-55 anti-slip cast metal stair nosing into concrete, retro fitted into rebate using stainless steel machine screws, 6350 Rubber Ralwnut and DPC.
GEC Anderson Data Sheet - Separator V55
Anderson, GEC Ltd
Separator V55
V55 Stainless steel (EN 1.4401 grade) gypsum separatorWith Ø38mm threaded inlet and outlet fittings, removable quick release container with drain valve and handle. Cantilever brackets for wall fixing.
GEC Anderson Data Sheet - StorTidy V111
Anderson, GEC Ltd
StorTidy V111
V111 stainless steel StorTidy set comprising: 3 No upper shelves (200mm wide) and 1 No intermediate shelf with guardrail (315mm wide).450mm long with 1 No low shelf (315mm wide).
Drainage Systems for Below Ground
BLÜCHER UK Ltd
BLÜCHER® EuroPipe is the ideal drainage system for belowground use. The stainless steel systems offers the specifier and installer a metallic push-fit, lightweight and cost effective drainage system for foul and storm water drainage.
Dolphin Baby Range
Dolphin Solutions
Dolphin Baby Range shows changing tables in plastic and stainless steel. Available in recessed and surface mounted. Styles for every situation. Plus accessories to suit.
See the full range in this brochure or on our website www.dolphinsolutions.co.uk
SureFast corrosion resistant fasteners
Fixfast Ltd
Extending building life and reducing construction costs: our Stainless Steel range offer solutions for fixing flat roofs in corrosive environments, extending structural life and enabling significant cost savings in the building's lifecycle.
Kinley Perimeta Steel Planter Systems
Kinley
Perimeta bespoke and modular steel planter systems for external terrace, podium and urban hardscape areas where raised planting is required.
Comes in a range of finishes including galvanised, CorTen, stainless, powder-coated and others.
GEC Anderson Data Sheet - Series A sink: A55
Anderson, GEC Ltd
A55 single bowl: 550x400x200mm with 15mm corner radius. 20mm flat flange suitable for inset, undermount and flushmount installation. Sound deadened and plastic protected. EN 1.4301 grade stainless steel.Basket strainer waste with overflow.
GEC Anderson Data Sheet - StorTidy V113
Anderson, GEC Ltd
StorTidy V113
V113 stainless steel bucket sink set comprising: 1 No bucket sink with removable grate and Ø38mm outlet; 2 No 400mm stepless uprights and 2 No brackets.450mm long x 400mm wide.
Topclip Capping System
Metal Solutions Limited
The Topclip is a universal connector with double vulcanised seals, for the jointing of metal cappings.
Topclip is suitable for all traditional metal roofing materials ie copper, zinc, stainless steel, precoated aluminium & GreenCoat, as well as PPC aluminium.
GEC Anderson Data Sheet - Series A sink: A74T
Anderson, GEC Ltd
The A74T is one of the GEC Anderson® Series A range of individual stainless steel sinks, including tap landing. Series A sinks are of the highest quality and finish and are available in single, double and combination sizes.
• Internal bowl size: 740x400x200mm with 12mm corner radius • 90mm tap landing with Ø35mm taphole
• 20 mm flat flange (Overall size: 780x510mm)
• Fixing options: Undermount / Inset / Flushmount
• EN 1.4301 brushed satin stainless steel
• Ø89mm basket strainer waste (BSW) and overflow fittings • Sound deadended and plastic protected
GEC Anderson Data Sheet - Series A sink: AD34T
Anderson, GEC Ltd
The AD34T is one of the GEC Anderson® Series A range of double stainless steel sinks, including tap landing. Series A sinks are of the highest quality and finish and are available in single, double and combination sizes.
• Internal bowl size: 340x400x200mm with 12mm corner radius • 90mm tap landing with Ø35mm taphole
• 20 mm flat flange (Overall size: 745x510mm)
• Fixing options: Undermount / Inset / Flushmount
• EN 1.4301 brushed satin stainless steel
• Ø89mm basket strainer waste (BSW) and overflow • Sound deadended and plastic protected
GEC Anderson Data Sheet - Series A sink: A55T
Anderson, GEC Ltd
The A55T is one of the GEC Anderson® Series A range of individual stainless steel sinks, including tap landing. Series A sinks are of the highest quality and finish and are available in single, double and combination sizes.
• Internal bowl size: 550x400x200mm with 15mm corner radius • 90mm tap landing with Ø35mm taphole
• 20 mm flat flange (Overall size: 590x510mm)
• Fixing options: Undermount / Inset / Flushmount
• EN 1.4301 brushed satin stainless steel
• Ø89mm basket strainer waste (BSW) and overflow fittings • Sound deadended and plastic protected
GEC Anderson Data Sheet - Series A sink: A50T
Anderson, GEC Ltd
The A50T is one of the GEC Anderson® Series A range of individual stainless steel sinks, including tap landing. Series A sinks are of the highest quality and finish and are available in single, double and combination sizes.
• Internal bowl size: 500x400x200mm with 12mm corner radius • 90mm tap landing with Ø35mm taphole
• 20 mm flat flange (Overall size: 540x510mm)
• Fixing options: Undermount / Inset / Flushmount
• EN 1.4301 brushed satin stainless steel
• Ø89mm basket strainer waste (BSW) and overflow fittings • Sound deadended and plastic protected
GEC Anderson Data Sheet - Series A sink: A34T
Anderson, GEC Ltd
The A34T is one of the GEC Anderson® Series A range of individual stainless steel sinks, including tap landing. Series A sinks are of the highest quality and finish and are available in single, double and combination sizes.
• Internal bowl size: 340x400x200mm with 12mm corner radius • 90mm tap landing with Ø35mm taphole
• 20 mm flat flange (Overall size: 380x510mm)
• Fixing options: Undermount / Inset / Flushmount
• EN 1.4301 brushed satin stainless steel
• Ø89mm basket strainer waste (BSW) and overflow fittings • Sound deadended and plastic protected
GEC Anderson Data Sheet - Series A sink: A70T
Anderson, GEC Ltd
The A70T is one of the GEC Anderson® Series A range of individual stainless steel sinks, including tap landing. Series A sinks are of the highest quality and finish and are available in single, double and combination sizes.
• Internal bowl size: 700x400x200mm with 15mm corner radius • 90mm tap landing with Ø35mm taphole
• 20 mm flat flange (Overall size: 740x510mm)
• Fixing options: Undermount / Inset / Flushmount
• EN 1.4301 brushed satin stainless steel
• Ø89mm basket strainer waste (BSW) and overflow fittings • Sound deadended and plastic protected
GEC Anderson Data Sheet - Series A sink: A23T
Anderson, GEC Ltd
The A23T is one of the GEC Anderson® Series A range of individual stainless steel sinks, including tap landing. Series A sinks are of the highest quality and finish and are available in single, double and combination sizes.
• Internal bowl size: 230x400x170mm with 15mm corner radius • 90mm tap landing with Ø35mm taphole
• 20 mm flat flange (Overall size: 270x510mm)
• Fixing options: Undermount / Inset / Flushmount
• EN 1.4301 brushed satin stainless steel
• Ø89mm basket strainer waste (BSW) and overflow fittings • Sound deadended and plastic protected
GEC Anderson Data Sheet - Series A sink: AD40T
Anderson, GEC Ltd
The AD40T is one of the GEC Anderson® Series A range of double stainless steel sinks, including tap landing. Series A sinks are of the highest quality and finish and are available in single, double and combination sizes.
• Internal bowl size: 400x400x200mm with 12mm corner radius • 90mm tap landing with Ø35mm taphole
• 20 mm flat flange (Overall size: 865x510mm)
• Fixing options: Undermount / Inset / Flushmount
• EN 1.4301 brushed satin stainless steel
• Ø89mm basket strainer waste (BSW) and overflow • Sound deadended and plastic protected
GEC Anderson Data Sheet - Series A sink: A40T
Anderson, GEC Ltd
The A40T is one of the GEC Anderson® Series A range of individual stainless steel sinks, including tap landing. Series A sinks are of the highest quality and finish and are available in single, double and combination sizes.
• Internal bowl size: 400x400x200mm with 12mm corner radius • 90mm tap landing with Ø35mm taphole
• 20 mm flat flange (Overall size: 440x510mm)
• Fixing options: Undermount / Inset / Flushmount
• EN 1.4301 brushed satin stainless steel
• Ø89mm basket strainer waste (BSW) and overflow fittings • Sound deadended and plastic protected
Roof Drains & Pipes
BLÜCHER UK Ltd
BLUCHER offers a stainless steel roof drainage system suitable for:
* Flat roofs of all designs
* Downpipes from roofs of all designs
* Roofs with bitumen or single ply roof membrane
* Equally suitable for gravity and siphonic systems.
DB38 Hair Dryer
phs Warner Howard
The DB38 hair dryer is part of the Classic
Range of World Dryer products, and shares
the same properties of reliability, longevity
and durability. Available in either white or
polished stainless steel finishes, this hair
dryer is powerful enough for all users.
Abode Sink & Tap Collection 2024
Abode (Part of Norcros Group (Holdings) Ltd)
Our complete portfolio of Abode & Pronteau by Abode products. Featuring kitchen sinks in stainless steel, ceramic and granite with undermount and inset variants, design leading kitchen taps and our full collection of Pronteau instant hot water taps.
Forster Presto - fire and smoke protection
Forster Profile Systems (UK) Ltd
Forster Presto is offering versatile, extensively tested and fully approved steel and stainless steel door and screens providing fire and smoke protection. Both glazed elements can provide up to E120 fire protection without compromising on design.
GEC Anderson Data Sheet - Series A sink: A3118T
Anderson, GEC Ltd
The A3118T is one of the GEC Anderson® Series A range of combination stainless steel sinks, including tap landing. Series A sinks are of the highest quality and finish and are available in single, double and combination sizes.
• Main bowl (left): 310x400x200mm
• Small bowl (right): 180x400x170mm
• Corner Radius: 12mm
• 90mm tap landing with Ø35mm taphole
• 20 mm flat flange (Overall size: 555x510mm)
• Fixing options: Undermount / Inset / Flushmount
• EN 1.4301 brushed satin stainless steel
• Ø89mm basket strainer waste (BSW) and overflow • Sound deadended and plastic protected
GEC Anderson Data Sheet - Series A sink: A2350T
Anderson, GEC Ltd
The A2350T is one of the GEC Anderson® Series A range of combination stainless steel sinks, including tap landing. Series A sinks are of the highest quality and finish and are available in single, double and combination sizes.
Main bowl (right): 500x400x200mm. Small bowl (left): 230x400x170mm • Corner Radius: 15mm
• 90mm tap landing with Ø35mm taphole
• 20 mm flat flange (Overall size: 795x510mm)
• Fixing options: Undermount / Inset / Flushmount
• EN 1.4301 brushed satin stainless steel
• Ø89mm basket strainer waste (BSW) and overflow • Sound deadended and plastic protected
GEC Anderson Data Sheet - Series A sink: A1831T
Anderson, GEC Ltd
The A1831T is one of the GEC Anderson® Series A range of combination stainless steel sinks, including tap landing. Series A sinks are of the highest quality and finish and are available in single, double and combination sizes.
Main bowl (right): 310x400x200mm. Small bowl (left): 180x400x170mm • Corner Radius: 12mm
• 90mm tap landing with Ø35mm taphole
• 20 mm flat flange (Overall size: 550x510mm)
• Fixing options: Undermount / Inset / Flushmount
• EN 1.4301 brushed satin stainless steel
• Ø89mm basket strainer waste (BSW) and overflow • Sound deadended and plastic protected
GEC Anderson Data Sheet - Series A sink: A5023T
Anderson, GEC Ltd
The A5023T is one of the GEC Anderson® Series A range of combination stainless steel sinks, including tap landing. Series A sinks are of the highest quality and finish and are available in single, double and combination sizes.
• Main bowl (left): 500x400x200mm
• Small bowl (right): 230x400x170mm
• Corner Radius: 15mm
• 90mm tap landing with Ø35mm taphole
• 20 mm flat flange (Overall size: 795x510mm)
• Fixing options: Undermount / Inset / Flushmount
• EN 1.4301 brushed satin stainless steel
• Ø89mm basket strainer waste (BSW) and overflow • Sound deadended and plastic protected
Manual Full-Height Turnstile for Internal Installation - RevoSec
Gunnebo Entrance Control
RevoSec is an elegant and transparent full-height turnstileavailable in many configurations: with full stainless steel construction, roof, rounded glass panel infill,full panel glass wings and stainless steel column; further enhanced by framed glass panel wings and brush strips.
A sensor restricts access to the dead area generating an alarm in case of passage in the unauthorised direction of passage. The door will lock and then release in this direction via a cornice mounted keyswitch.
In the event of an emergency or power-off scenario, the unit can be configured fail-safe i.e. rotor freely rotates or
fail-lock i.e. rotor locks.
Dolphin Velocity Range
Dolphin Solutions
A huge range of hand dryers including high speed options. Available in a variety of styles and options included stainless steel and white metal finishes, and behind mirror, recessed and surface mounted options
See the full range in this brochure or on our website www.dolphinsolutions.co.uk
Laminate Heated Lockers
Helmsman
Helmsman heated lockers are manufactured from aluminium and stainless steel with a Solid Grade Laminate door. Heat is generated from a single or twin eco-friendly tube heater. The heater can be plugged into a 3 pin power socket or wired into a fused switch.
Rainwater Vandal Range
Lindab Ltd
Our range of vandal products is used in high traffic areas as it is harder to damage. It is made with 2mm hot-dip galvanised steel or 1.5mm stainless steel plate. This can be used with our standard rainline products but needs to be connected with a BUTK drain shoe.
Channel and Bolt Fixings
Leviat
There are various methods of fixing stainless steel masonry supports, restraints and windposts to either concrete or steel frames.
The selection of the most appropriate method will depend on many factors including fixing centres, edge distances, type of fixture, loading and the site adjustment required.
Masonry Support Systems and Lintels
Leviat
Masonry cladding on steel or concrete framed structures is normally supported by stainless steel support systems.
Frame type, differential movement, type of cladding, masonry load and cavity width all need to be considered when designing the most appropriate fixing solution.
Corner Guards
Leviat
Corner Guards offer protection to exposed edges of columns and walls in areas of high traffic such as car parks, warehouses, hospitals etc.
Ancon manufactures corner guards in a standard length of 1250mm in either stainless steel, galvanised steel or untreated mild steel.
06 - Safety made of metal mesh Systems - GKD Creative Weave - Balustrades, roller shutter and fall guard protections
GKD - GEBR. KUFFERATH AG
GKD Creative Weave has been leading the market in technical woven mesh and stainless steel fabrics. Using this knowledge GKD has produced a Balustrade system that allows the transparent, robust, and secure nature of stainless steel woven mesh to create a durable and virtually maintenance free balustrading solution.
This solution is built with a standard fixing system used in the balustrading industry allowing it to be installed with ease and convenience. This system also makes it a perfect product for replacing old and dated balustrade systems. With a choice a of four different mesh types the GKD Balustrading system can be integrated into a wide variety of designs and concepts.
Showing 541-576 of 703