"in situ concrete floors"
7,538 results found
Relevance
Showing 1729-1764 of 1892
JUTA CAB - Crystaline Active Barrier
Juta UK Ltd
JUTA UK Crystaline Active Barrier (CAB) is a crystalline cementitious waterproof slurry which creates a monolithic bond to concrete structures. When mixed with clean water and applied correctly, it is designed to form a permanent waterproof coating in accordance with BS8102:2009.
Newton HydroTank 315 Waterbar BDA Certificate
Newton Waterproofing Systems
A high-grade, hydrophilic waterbar with high elasticity and high tensile strength, made from a polymer which swells when in contact with moisture. Ideal for sealing structures against water leaks to both cast-in-place concrete and precast construction joints.
Acoustic Deck 37 - Premium Direct to Joist Acoustic Board
JCW Acoustic Supplies Limited
15MM HIGH PERFORMANCE RESILIENT ACOUSTIC LAYER LAMINATED TO A 22MM T&G CEMENT BASED BOARD, DESIGNED FOR FITTING DIRECT TO JOISTS. Slim profile and high acoustic performance options of Acoustic Deck 37 make it ideal in timber floor refurbishment projects. Deck37 is specially designed for direct to joist fit after existing timber floor has been removed. Saves height saves money removing existing timber floors, therefore removing requirement for laying a new one, overcoming floor-to-ceiling height issues, saving money and time Strong and rigid: Suits both 400mm and 600mm joist centres. Non load bearing partitions can be built off the floor. Deck37 is certified to provide the acoustic insulation required for compliance with part E of the Building Regs for both impact and airborne noise
Cemfloor Therm Technical Data Sheet
Cemfloor Liquid Screeds
Cemfloor Therm is a specially formulated self levelling cementitious floor screeds. Cemfloor Therm can be applied to a wide range of floors.
Cemfloor Therm is a mixture of Cemfloor binder, cement, water and a suitable sand. Cemfloor Therm is a high performance screed which complies with EN 13813.
Emshield DFR-WFR CE Product Data Sheet
NCC – Emseal Movement Joints
Fire Resistant (CE Registered) Floor & Wall Movement Joint Sealing System -Product Data Sheet
WOOD
Mapei (UK) Ltd
Mapei provide full systems for both the substrate preparation, installation and protection of all types of wooden flooring.
Amtico LVT Cleaning and Maintenance Guide
Amtico International
To keep your Amtico floors looking their best. It’s important to follow our simple cleaning and care guidelines.
Isocheck 32T - Data Sheet v2.12
Isomass Ltd
The Isocheck 32T system is
designed to reduce sound
transmission and thermally
enhance traditional joisted timber
floors.
Isocheck Impact Mat 300 - Data Sheet v2.7
Isomass Ltd
The Isocheck Impact Mat 300 system is designed to reduce
sound transmission through timber floors and staircases.
Isocheck Impact Mat 100 - Data Sheet v2.9
Isomass Ltd
The Isocheck Impact Mat 100 system is designed to reduce
sound transmission through timber floors and staircases.
Rundum Original side sliding garage door T-bar
Rundum Meir (UK) Ltd
Generic T-bar design for the Rundum Meir 'round the corner' garage door including floor plan.
Argeton standard details - (ARG-H) Vertical tiles on horizontal rail & vertical T section to SFS
Telling Rainscreens Ltd
This is a set of standard typical details for vertically laid tiles which are fixed back to SFS, Timber studwork, blockwork, masonry or concrete substructure. These can be used with the component drawings and tile schedule drawings. Drawings are also available in DWG format by contacting the office.
Masonry Support Systems and Lintels
Leviat
Masonry cladding on steel or concrete framed structures is normally supported by stainless steel support systems.
Frame type, differential movement, type of cladding, masonry load and cavity width all need to be considered when designing the most appropriate fixing solution.
Channel and Bolt Fixings
Leviat
There are various methods of fixing stainless steel masonry supports, restraints and windposts to either concrete or steel frames.
The selection of the most appropriate method will depend on many factors including fixing centres, edge distances, type of fixture, loading and the site adjustment required.
Elastocoat C Polyurea
ECON Building Products – BASF Distributor
Elastocoat® C is BASFs high-tech polyurea for reliable and enduring protection of all surfaces, whether concrete, wood or steel. With its diverse fields of application and its manifold properties, it is the ideal solution for countless challenges as a fast, efficient and lasting seal.
Bison Data Sheet
Kinley
Heavy-duty steel kerb for edging hard landscapes.
Bison is the superior alternative to concrete kerbs. A steel pin kerb edge restraint used
to delineate hard surfaces by creating
curves and strong angles. Available
in various heights in a galvanised
steel finish.
Lafite Connect Brochure
Gradus
Lafite Connect is a range of complementary designs that work together to create interesting and unique floor schemes. The range includes 3 designs; Fusion, Stripes and Plains which can be used together to enhance an interior by customising the floor. Lafite Connect; Fusion, Stripes and Plains offer versatility and can be mixed within a floor scheme to create feature areas or to emphasise specific zones such as breakout areas, seating areas and walkways. This range also works seamlessly with the Lafite Space product.
Hush Felt Underlay
Hush Acoustics
Hush Felt Underlay is a high performing felt underlay that has been designed to isolate the final floor finish and improve impact acoustic performance. The Hush Felt Underlay is primarily used under carpet, laminate and engineered timber floor finishes.
By selecting to use the Hush Felt over thicker or less dense materials the initial excessive bounce will be eliminated. If the wrong underlay is used then the the acoustic efficiency will be lost when the underlay settles. Hush Felt Underlay is crucial for isolating these floor finishes.
Riga Superwire - Datasheet - Riga Wood
Riga Wood
Birch plywood overlaid with a phenol or UV resistant film on both faces. The wear face has a special surface pattern whilst the reverse face is usually smooth.
Applications include the transport industry, trailer floors, bus floors, van floors, containers, children's playgrounds, loading platforms and exhibition stands.
Riga Superwire has a decorative surface with high wear resistance, is weather- and water-proof, is durable, is easy-to-clean, is workable and is resistant to commonly used chemicals.
Bona SuperSport ONE - Sales Sheet
Bona Limited
One-component sport lacquer with oxygen crosslinking technology for
durability and appearance. Premium, waterborne wood floor finish specifically
formulated for professional use on wood sport floors. Provides a tough,
polyurethane finish with good build. Compliant with the European standard
for indoor sports surfaces for safe play.
Truscreed Technical Data Sheet
Tarmac
A strong, high quality floor screed ideal for all common floor finishes. Truscreed is available in two compressive strengths - Truscreed C30 and Truscreed HD C35. Available with and without fibres, our factory produced Truscreed fulfils higher strength requirements linked to faster drying times.
Acousticork T66 General Purpose Acoustic Underlay
Total Vibration Solutions Limited t/a TVS Group
Acousticork T66 is a 3mm thick general purpose acoustic underlay used below vinyl, timber and laminate flooring. Also available in 4.5mm for below ceramic tiles. Acousticork T66 is used to improve the floors acoustic impact performance and complies with UK Building Regulations Approved Document E.
GenieMat FF Brochure
Pliteq
GenieMat FF is he next generation of acoustic floating floor that is made from 92% recycled rubber content.
- Continuous underlayment system that limits surface area contact down to 4% at 1400 kg/m2
- Achieves low natural frequency with systems available as low as 6 Hz
- Can be safely loaded over a wide range up to 100 kg/cm2
- Helps to achieve HEA05 BREEAM credits
- Mould, bacteria, fungi, and water resistant
- Penetrations for pipes, ductwork, electrical conduits, and drains are easily accommodated
- Rolls out quickly and is easy to install without the need for adhesive
- Can be used directly under screed, lightweight, or normal weight concrete with no plywood formwork required
COREFLEX® - THERMOPLASTIC WATERPROOFING WITH AN ACTIVE LAYER
CETCO
COREFLEX is designed for waterproofing applications where the product is properly covered and confined. COREFLEX should only be installed after substrate preparation has been properly completed and is suitable to receive the waterproofing system. COREFLEX should be used with structural grade reinforced castin- place concrete with conventional forms that produce a smooth surface. Use COREFLEX with reinforced shotcrete walls conforming to ACI 506 Core Grade 1 or 2; minimum 200 mm thick, applied from the bottom up in their full wall structural design thickness in a single application per shotcrete lift. Consult CETCO for guidelines for stay-in-place concrete forms.
Argeton standard details - (ARG-D) Horizontal Rail and Vertical T to SFS
Telling Rainscreens Ltd
This is a set of standard typical details for horizontally laid tiles which are fixed back to SFS or Timber studwork but also blockwork, masonry and concrete substructures. These can be used with the component drawings and tile schedule drawings. Drawings are also available in DWG format by contacting the office.
ACO CivicDrain brochure
ACO Technologies plc
Manufactured from Vienite, ACOs high strength polymer concrete material, ACO CivicDrain is suitable for vehicle traffic up to Load Class C 250.
ACO CivicDrain comes complete with a corrosion resistant black composite Heelguard grating, ideal for pedestrian traffic.
Armatherm 500 - Thermal Break
Armatherm, a Brand of Armadillo Noise & Vibration Limited
Armatherm 500 thermal break material is a high strength, thermoset polyurethane manufactured in several densities which can support loads up to 4,000 psi with R values as high as 3.8 per inch which is superior to the properties of aerated concrete and wood blocking.
RonaBond HB40
Ronacrete Ltd
RonaBond HB40 mortar is used for repairing concrete on vertical and overhead surfaces where ease of application is as important as strength. RonaBond HB40 can be applied in relatively thick section to walls and soffits and, depending on the nature of the repair, in layers up to 75mm depending on size and orientation.
Altro Wood Safety Collection Brochure
Altro
Introducing our new wood-look flooring
that combines functional performance
with modern design to create spaces that
really work for the people that use them.
Take your pick between our two safety flooring ranges 2mm Altro Wood Safety and 2.85mm Altro Wood Safety Comfort.
Surface Pro
Intelligent Membranes
Internal natural latex paint on protection for , floors , sanitary ware, kitchens, electrical hobs . Fully bio degradable
Isocheck Impact Mat 200 - Data Sheet v2.17
Isomass Ltd
The Isocheck Impact Mat 200 system is designed to reduce
impact and airborne sound transmission through timber floors
Amtico Access Collection- Loose Lay
Amtico International
Amtico Access loose lay tiles and planks are designed to meet the complex demands of commercial projects.
Made to the same exacting standards as all Amtico floors, Access loose lay LVT requires no permanent adhesive, so it can be laid quickly with minimal disruption, often directly onto an existing floor.
Bona Titan - Brochure
Bona Limited
Bona Titan takes wood floor adhesives to another level. Thanks
to its unique titanium-based formula with quadruple crosslinking
technology, this high performance silane adhesive delivers safer,
stronger and longer lasting wooden floors with fast initial bonding.
Whatever the installation, now there’s just one choice.
Hush Mat 15
Hush Acoustics
Hush Mat 15 is a high performing acoustic floor system. This uniquely engineered acoustic rubber ensures superior acoustic performance is achieved when reducing impact sound. The product contains high levels of mass which in turn contributes to airborne sound reduction also, this is not normally the case with acoustic flooring.
Hush Suspended Ceilings
Hush Acoustics
Hush Metal Frame Ceiling System is an accepted method of creating a decoupled acoustic ceiling below a joisted or concrete structure. This is one of the best ways to provide acoustic attenuation where the installation of a lowered ceiling is not a problem. Also allows for service voids to be created at ceiling level.
Riga Poliform - Datasheet - Riga Wood
Riga Wood
Birch plywood overlaid with a special composite material on both sides.
Riga Poliform is used for formwork systems.
Riga Poliform produces a superior appearance to a concrete surface whilst protecting the plywood substrate and the thickness of the composite face material helps to protect the plywood against swelling.
Showing 1729-1764 of 1892