"mortars"
1,100 results found
Relevance
Showing 73-108 of 145
BS 7533 Mortar Paving System used at London's Savoy
Instarmac Group plc
The Savoy’s restoration programme is one of the most ambitious refurbishments undertaken in Britain, with an estimated worth of £100 million. The restoration started in 2007, with completion in early 2010.
LDC Landscape Contractors specified Ultrascape Pro-Bed HS fine bedding concrete, Pro-Prime slurry primer and Flowpoint rapid setting grout in charcoal, to re-pave the entrance court to The Savoy, for Chorus- main contractors for the external landscaping.
wedi 360 flexible middle-bed mortar TDS
Wedi Systems (UK) Ltd
TDS - FJM Eco BS 7533 Type 40 Jointing Mortar
Larsen Building Products
TDS - FBC Eco BS 7533 Type 35 Bedding Mortar
Larsen Building Products
TDS - FBC Eco BS 7533 Type B Bedding Mortar
Larsen Building Products
TDS Sopro RAM 3 454 - Renovation and Levelling Mortar
SMET Building Products Ltd
TDS - FJM Eco Smooth BS 7533 Type 40 Jointing Mortar
Larsen Building Products
MSDS - FJM Eco Smooth BS 7533 Type 40 Jointing Mortar
Larsen Building Products
MSDS - FJM Eco BS 7533 Part 101 Type 40, Jointing Mortar
Larsen Building Products
MSDS - FBC Eco BS 7533, Part 7, Type B Bedding Mortar
Larsen Building Products
MSDS - FBC Eco Permeable BS 7533 Part 101, Type 35 Bedding Mortar
Larsen Building Products
Colour Chart - Resuflor Terrazzo decorative epoxy flooring screed
Sherwin-Williams
Terrazzo combines resin with coloured marble, granite chips or other approved aggregates in a trowelled mortar flooring system. This mortar is then ground and polished to reveal the natural beauty of the aggregates surrounded by the coordinating resin matrix.
Bedding. Priming. Sealing. Swindon's Regent Street
Instarmac Group plc
Regent Street, a main shopping thoroughfare in Swindon town centre has been re-paved using UltraScapes Eco-friendly mortar paving system comprising of a bedding mortar, grout and primer all compliant with BS 7533.
SAINT-ASTIER_brick_repairs_DRY_READY_MIX_Specs
Saint-Astier®
General Specifications for surface repairs and formworks of bricks with dry ready mix special mortars
Limelite White Peak Lime Putty
Tarmac
White Peak Lime Putty is made from the finest Buxton quicklime.
Matured for a minimum of 4 months, it is ideal for the production of lime mortars, plasters and renders in restoration, conservation, heritage works
Lime putty has no hydraulic set (does not set by reaction with water). It hardens by absorbing carbon dioxide from the air. This process is slow and allows for small movements of buildings before the final set. Lime mortar made with lime putty is a very workable material and when hardened is more ductile than cement based mortars. This allows the building to continue to accommodate small movements. Lime mortars are also “breathable” and vapour permeable this helps in control of moisture in the building fabric. The bond strength of lime mortar is normally weaker than the fabric.
SAINT-ASTIER_stone_repairs_DRY_READY_MIX_Specs
Saint-Astier®
General Specifications for surface repairs and formworks of building stones with dry ready mix special mortars
RonaBond EasySkim FC
Ronacrete Ltd
RonaBond EasySkim FC is a pre-packed fairing coat mortar which is applied as a skim coat in thicknesses up to 3mm to provide a smooth, hard finish to damaged, blemished and repaired concrete surfaces. RonaBond EasySkim FC is used as a levelling mortar prior to the application of protective coatings or paints. The material is supplied in pre-blended form.
BS 7533 Bedding, Jointing, Sealing. Lime Street Station.
Instarmac Group plc
The entrance area to Lime Street Station has been rejuvenated
using Ultrascape materials. The improvements were made using
Pro-Bed HS bedding mortar, Pro-Prime slurry primer, Flowpoint
ECO flowable grout and Cempoint gun injected mortar. The four
products are proven to be BS 7533 compliant under UKAS testing
methods.
ISO 9001:2015 Certification
Saint-Gobain Weber
Quality Management System ISO 9001:2015 for the design, manufacture and supply of renders, adhesives, coatings, mortars, flooring compounds and insulation systems
UltraScape helps to preserve historic thoroughfare
Instarmac Group plc
UltraScapes BS 7533 mortar paving system has been used to rejuvenate a busy high street in Wakefield as part of plans to regenerate the area.
Flashpoint Datasheet
Associated Lead Mills
Provides a preferred alternative to the use of mortar as a pointing material for lead-brick and lead masonry joints. Mortar is unable to expand and contract with lead and masonry during temperature variations leading in some cases to the mortar cracking and allowing ingress of water.
Is a one part, neutral cure, silicone based sealant that once applied will cure to give a flexible, durable and elastic seal, capable of accommodating the high degree of thermal expansion and contraction often encountered with lead flashings exposed to direct sunlight.
Includes more details on the product, joints without DPC, joint with DPC, lot sizes and product description and properties.
UltraScape paves the Future of Living
Instarmac Group plc
UltraScapes BS 7533 Mortar Paving System has been used to install 15,000sqm of paving at Dubai Creek the next generation in contemporary life, work and play.
H+H Thin-Joint System - A Modern Method of Construction
H+H UK Ltd
Thin-Joint construction combines the use of large format, accurately dimensioned aircrete blocks and quick setting mortar to create a highly productive and cost-effective building system.
SMET Natural Hydraulic Lime Brochure
SMET Building Products Ltd
The manufacture of natural hydraulic limes consumes less energy and produces less greenhouse gases than that of Portland cement per unit weight. Binders can be produced from limestone only by high-energy inputs. Significant efforts are being made by binder
producers to reduce their energy consumption – and their carbon dioxide emissions – by switching
from hydrocarbons to other fuels and by improving their
production processes. The total energy content per tonne
of lime-based mortar has the potential to be between 75
and 90% of that for cement-based mortars. Over a period
of years of exposure to the atmosphere, lime-based mortars absorb most or all of the carbon dioxide that was driven off during their high temp manufacturing process – known as calcination.
https://tinyurl.com/3nyh2fut
H+H Vertical Wall Panel Brochure
H+H UK Ltd
Celcon Vertical Wall Panels are storey-high panels of aircrete, designed to allow an exceptionally fast build method. Manufactured to the design storey height of a house with a width of 600mm and a thickness of 100mm, Vertical Wall Panels are designed to be craned into place onto a bed of mortar on standard foundations. Blocks are joined using Thin-Joint Mortar with 2mm (3mm) joints, providing an extremely airtight finish and panels can be cut on site to accommodate design details.
RonaBond H25
Ronacrete Ltd
RonaBond HB25 is a prepacked mortar used for repairing concrete on vertical and overhead surfaces where ease of application is as important as high strength. It can be applied in relatively thick section to walls and soffits and, depending on the nature of the repair, in layers up to 75mm deep in pocket repairs.
RonaBond HB25 is supplied prepacked requiring only the addition of water.
The cured mortar bonds well to concrete, steel and other building surfaces. It offers long term performance and protection to structures.
RADBAR Hydrocarbon DPC BBA Certificate
Capital Valley Plastics Ltd
Hydrocabon DPC protects against moisture, radon, carbon dioxide, methane and hydrocarbons and VOC's. Robust and durable with industry leading embossing for superior mortar adhesion. Suitable for multi-storey use.
Stucanet 80 E-BM (Stainless steel) Product Data Sheet
Bekaert
Bekaert Stucanet® 80 E-BM is
a purpose designed plaster and
render carrier manufactured from
a stainless steel welded wire mesh
into which a moisture absorbent
sheet of chip paper is interwoven.
The chip paper assists with the
wet adhesion and curing of the
mortar and the perforations allow
the mortar to perfectly bond around
the steel wires, resulting in firm
anchoring of the mortar and high
resistance to load and impact.
Stucanet® 80 E-BM has solid flat
wires incorporated to increase the
stiffness of the panel.
Stucanet® 80 E-BM is used
specifically for exterior façade
applications. It has the same
wire structure as Stucanet® 80,
but is protected with a breather
membrane to prevent moisture
penetration whilst still allowing the
wall to breathe naturally.
Stucanet S E-BM (Stainless steel) Product Data Sheet
Bekaert
Bekaert Stucanet® S E-BM is a
purpose designed plaster and
render carrier manufactured from
a stainless steel welded wire mesh
into which a moisture absorbent
sheet of chip paper is interwoven.
The chip paper assists with the
wet adhesion and curing of the
mortar and the perforations allow
the mortar to perfectly bond around
the steel wires, resulting in firm
anchoring of the mortar and high
resistance to load and impact.
Stucanet® S E-BM has two parallel,
round fixing wires.
Stucanet® S E-BM is used
specifically for exterior façade
applications. It has the same
wire structure as Stucanet® S,
but is protected with a breather
membrane to prevent moisture
penetration whilst still allowing the
wall to breathe naturally.
Stucanet 80 HG-BM (Galvanized) Product Data Sheet
Bekaert
Bekaert Stucanet® 80 HG-BM is
a purpose designed plaster and
render carrier manufactured from
a heavy galvanised steel welded
wire mesh into which a moisture
absorbent sheet of chip paper is
interwoven.
The chip paper assists with the
wet adhesion and curing of the
mortar and the perforations allow
the mortar to perfectly bond around
the steel wires, resulting in firm
anchoring of the mortar and high
resistance to load and impact.
Stucanet® 80 HG-BM has solid flat
wires incorporated to increase the
stiffness of the panel.
Stucanet® 80 HG-BM is used
specifically for exterior façade
applications. It has the same
wire structure as Stucanet® 80,
but is protected with a breather
membrane to prevent moisture
penetration whilst still allowing the
wall to breathe naturally.
Stucanet S HG-BM (Galvanized) Product Data Sheet
Bekaert
Bekaert Stucanet® S HG-BM is
a purpose designed plaster and
render carrier manufactured from
a heavy galvanized steel welded
wire mesh into which a moisture
absorbent sheet of chip paper is
interwoven.
The chip paper assists with the
wet adhesion and curing of the
mortar and the perforations allow
the mortar to perfectly bond around
the steel wires, resulting in firm
anchoring of the mortar and high
resistance to load and impact.
Stucanet® S HG-BM has two
parallel, round fixing wires.
Stucanet® S HG-BM is used
specifically for exterior facade
applications. It has the same
wire structure as Stucanet® S,
but is protected with a breather
membrane to prevent moisture
penetration whilst still allowing the
wall to breathe naturally.
PermaRock Dry Dashing Aggregate / Stone (tough, durable, long lasting, cost-effective and almost maintenance render finish)
PermaRock Products Ltd
Dry Dashing is a traditional decorative rendering technique that provides a tough, durable, long lasting, cost-effective and almost maintenance free exterior wall finish.
Dry Dash comprises pre-washed and screened Dashing Aggregates which incorporate different types and colours of stones that are blended together and applied to a specially formulated, self-coloured, polymer enriched mineral-cement Dashing Mortar (DM) offering enhanced performance over traditional sand/cement renders.
Dashing Mortar is available in Grey, White, Yellow, Cream, Red and Pink, with other shades made to special order (minimum order quantities).
Any of the comprehensive range of graded dashing stones can be used with any shade of PermaRock Dashing Mortar to achieve an attractive pebble dash finish.
RADBAR Gas Resistant DPC BBA Certificate
Capital Valley Plastics Ltd
Gas Resistant DPC protects against moisture, radon, methane and carbon dioxide. Industry leading embossing ensures superior mortar adhesion. Complies with BS8485:2015+A1:2019 and BRE BR211.
CEMEX Pavegrip - Technical Datasheet
CEMEX UK
STREETPAVE PaveGrip is a high-performance priming and bonding mortar specially designed for natural stone and pre-cast concrete paving units, for use in
bonded/rigid construction in commercial and public area projects.
Keyfix Non-combustible Cavity Tray Lintel Installation Guide
Keyfix
Lintels should be installed with a minimum end bearing
of 150mm taking into account the positioning of the lintel’s
Stop Ends. The lintel should be bedded in mortar and
levelled along its length and across its width.
Keim Mineral Paints - Stone Brochure
Keim Mineral Paints Ltd
Regardless of the specific type of stone; whether it be sand, lime, rubble or granite, KEIMs Restauro stone restoration materials offer a complete system for the preparation, consolidation, restoration and decoration
of the same. Stone replacement mortars are used for reconstructing stone. The KEIM Restauro range of dry bagged, mineral based restoration mortars are ideal for repairing
damage to natural stone surfaces. The system is developed to be compatible with all types
of stone and provides breathability, durability and a finish which can be matched and blended into the existing original stonework.
Showing 73-108 of 145